Uporabniški priročnik za daljinski upravljalnik DIRECTV RC72

Uvod

The DIRECTV RC72 Remote Control is designed to provide seamless control over your DIRECTV Genie DVRs and clients in RF (Radio Frequency) mode, and other DIRECTV-branded receivers and DVRs in IR (Infrared) mode. This remote is essential for 2014 and newer Toshiba DIRECTV-Ready TVs, offering advanced functionality and user-friendly operation.

Glavne lastnosti vključujejo:

• Next-generation design with updated IR codes for modern televisions.
• Required for 2014 or newer Toshiba DIRECTV-ready TVs.
• Compatible with all DIRECTV-ready (RVU) televisions.
• Functions with older DIRECTV receivers when configured in IR mode.
• Provides on-screen tips to assist with button usage and programming.

Konec izdelkaview

Slika: spredaj view of the DIRECTV RC72 Remote Control. The remote is black and white, with a black top section containing navigation and function buttons, and a white bottom section with a numeric keypad. The DIRECTV logo is at the bottom.

Nastavitev in programiranje

The RC72 remote can operate in two primary modes: RF (Radio Frequency) for Genie DVRs and clients, and IR (Infrared) for older DIRECTV receivers and other devices like TVs and audio systems.

Pairing with DIRECTV Genie DVRs (RF Mode)

1. Ensure your Genie DVR is powered on.
2. Point the RC72 remote towards the Genie DVR.
3. Pritisnite in držite MUTE gumb in ENTER button simultaneously until the green light at the top of the remote flashes twice.
4. A message should appear on your TV screen confirming the remote is now paired in RF mode.

Programming for TV and Audio Devices (IR Mode)

To control your TV's power and volume, or other audio devices, you will need to program the remote using specific codes. The remote utilizes an extensive database of included codes.

1. Turn on the device you wish to program (e.g., your TV).
2. On the RC72 remote, press and hold the MUTE gumb in IZBERI button simultaneously until the green light at the top of the remote flashes twice.
3. Enter the 5-digit code for your TV brand. Common codes can be found in your DIRECTV receiver's on-screen menu under "Remote Control Setup" or on the DIRECTV support webmesto.
4. After entering the code, point the remote at the TV and press the MOČ button. If the TV turns off, the code is correct.
5. If the TV does not turn off, repeat the process with another code for your brand until successful.
6. To program an audio device, follow similar steps, but select the appropriate device type during the programming process.

Note: On-screen tips provided by your DIRECTV receiver can guide you through the programming process effectively.

Navodila za uporabo

Familiarize yourself with the buttons and their functions for optimal use of your DIRECTV RC72 remote control.

Top Section Buttons

• VKLOP/IZKLOP: Powers your DIRECTV receiver and programmed TV on or off.
• VODNIK: Prikaže programski vodnik.
• MENI: Accesses the main menu of your DIRECTV receiver.
• SEZNAM: Displays your recorded programs list.

Navigation and Control Buttons (Center Section)

• Smerne puščice (gor, dol, levo, desno): Navigate through menus and guides.
• IZBERI: Potrdi izbiro.
• NAZAJ: Vrne se na prejšnji zaslon ali meni.
• IZHOD: Izhod iz trenutnega menija ali zaslona.
• INFO: Displays information about the current program or selected item.
• Record (Red Dot): Initiates recording of the current program.

Nadzor glasnosti in kanala

• VOL (Glasnost navzgor/dolgo): Adjusts the volume of your programmed TV or audio device.
• CH (Preklop na kanal gor/dol): Changes the channel on your DIRECTV receiver.
• MUTE: Utiša zvok.
• PREJ: Vrnitev na prejšnji kanal.

Kontrole predvajanja

• PREVIJANJE NAZAJ: Rewinds playback.
• PREDVAJAJ/PAVZA: Predvaja ali začasno ustavi vsebino.
• HITRO NAPREJ: Hitro predvajanje naprej.
• STOP: Ustavi predvajanje.

Številčna tipkovnica

• 0-9: Used for direct channel entry and other numeric inputs.
• ENTER (input): Confirms numeric entries or switches to a specific input.
• Dash (-): Used for sub-channels or other specific functions.

Vzdrževanje

Pravilna nega bo podaljšala življenjsko dobo vašega daljinskega upravljalnika.

• Čiščenje: Use a soft, dry cloth to clean the remote. Do not use liquid cleaners or abrasive materials.
• Zamenjava baterije: When the remote's performance degrades or the indicator light no longer flashes, it's time to replace the batteries. The RC72 remote typically uses two AA batteries.
  1. Odprite pokrov prostora za baterije na zadnji strani daljinskega upravljalnika.
  2. Odstranite stare baterije.
  3. Insert new AA batteries, ensuring correct polarity (+ and -).
  4. Trdno zaprite pokrov prostora za baterije.
• Shranjevanje: Store the remote in a dry place away from extreme temperatures and direct sunlight.

Odpravljanje težav

If you encounter issues with your RC72 remote, try the following solutions:

Specifikacije

Podpora

For further assistance, programming codes, or advanced troubleshooting, please refer to the official DIRECTV support resources:

• Visit the official DIRECTV website for support documentation and FAQs.
• Contact DIRECTV customer service for personalized assistance.
• Utilize the on-screen help features available through your DIRECTV receiver.

Note: Specific warranty information for this accessory may be available through your DIRECTV service provider or the point of purchase.