EMG BQS Control Active/Passive Pickup Input Control User Manual

Uvod

The EMG BQS Control is an advanced tone shaping system designed for both active and passive pickups in electric guitars and basses. It provides precise control over your instrument's sound with a 3-band equalizer. This unit is similar to the BQC Control, but features separate bass and treble controls, along with a concentric (stacked) mid-control. The potentiometers are center detented for easy return to a neutral setting, and the system includes 2 extra volume knobs for convenience.

Lastnosti

• 3-pasovni EQ: Provides control over Bass, Mid, and Treble frequencies.
• Separate Bass and Treble Controls: Allows independent adjustment of low and high frequencies.
• Concentric Mid-Control: A stacked potentiometer for parametric control of mid-range frequencies.
• Active/Passive Pickup Compatibility: Designed to work seamlessly with both active and passive pickup systems.
• Solderless (Quick-Connect) Version: Facilitates easier installation without the need for soldering.
• Center Detented Potentiometers: Ensures easy identification of the neutral (flat) setting for each control.
• Priloženi dodatki: Comes with 2 extra volume knobs.

Nastavitev in namestitev

Installation of the EMG BQS Control involves integrating the module into your instrument's electronics cavity. Due to the sensitive nature of electronic components, it is recommended that installation be performed by a qualified technician if you are not experienced with guitar or bass wiring.

Splošni koraki namestitve:

1. Odklop napajanja: Always disconnect the instrument's power source (e.g., remove battery for active systems) before beginning any installation.
2. Prepare Cavity: Ensure there is adequate space within the instrument's control cavity for the BQS Control module and its potentiometers.
3. Connect Pickups: Utilize the solderless quick-connect system to attach your active or passive pickups to the BQS Control module as per the wiring diagram provided with the product.
4. Priključitev izhoda: Connect the output of the BQS Control to your instrument's output jack.
5. Napajalni priključek: For active systems, connect the battery clip to the designated power input on the module.
6. Testna funkcionalnost: Before reassembling, temporarily connect the instrument to an amplifier and test all controls to ensure proper operation.
7. Varne komponente: Once verified, carefully secure the module and potentiometers within the cavity and reassemble the instrument.

This image displays the EMG BQS Control module, featuring three potentiometers and associated wiring for active/passive pickup input control. The quick-connect terminals are visible, indicating the solderless design.

Navodila za uporabo

The EMG BQS Control provides intuitive tone shaping through its three potentiometers:

• Nadzor nizkih tonov: Adjusts the low-frequency response of your instrument. Turning clockwise increases bass, while turning counter-clockwise reduces it. The center detent indicates a neutral setting.
• Nadzor visokih tonov: Adjusts the high-frequency response. Turning clockwise increases treble, and counter-clockwise reduces it. The center detent indicates a neutral setting.
• Mid-Control (Concentric): This stacked knob allows for parametric control of the mid-range. The outer ring typically controls the mid-frequency level (boost/cut), while the inner knob selects the specific mid-frequency to be affected. Experiment with both controls to find your desired mid-range character. The center detent on the level control indicates a neutral setting.

All controls are designed to be highly responsive, allowing for subtle or dramatic changes to your instrument's tone. Start with all controls at their center detent positions and make small adjustments to achieve your desired sound.

Vzdrževanje

The EMG BQS Control is a robust electronic component designed for durability. Minimal maintenance is required:

• Ohranjajte na suhem: Napravo zaščitite pred vlago in ekstremnimi temperaturami.
• Nežno očistite: If cleaning is necessary, use a soft, dry cloth. Avoid abrasive cleaners or solvents.
• Preverite povezave: Periodically inspect the quick-connect wiring to ensure all connections are secure.
• Battery Replacement (for Active Pickups): If using active pickups, ensure the battery is fresh and properly connected. A weak battery can lead to degraded performance.

Odpravljanje težav

If you encounter issues with your EMG BQS Control, consider the following troubleshooting steps:

• Ni zvoka ali šibek signal:
  • Check all quick-connect wiring for secure connections.
  • If using active pickups, replace the battery with a fresh one.
  • Ensure the instrument cable is fully inserted into both the instrument and amplifier.
• Prekomerno brnenje ali hrup:
  • Verify proper grounding connections within the instrument.
  • Ensure all components are shielded correctly within the cavity.
  • Test with a different instrument cable or amplifier to rule out external factors.
• Controls Not Functioning:
  • Confirm that the potentiometers are correctly wired to the module.
  • Preverite morebitne ohlapne povezave ali poškodovane žice.

If these steps do not resolve the issue, it is recommended to consult a qualified instrument technician or contact EMG customer support.

Specifikacije

Garancija in podpora

Warranty information for the EMG BQS Control is typically provided with the product packaging or can be found on the official EMG website. For technical support, wiring diagrams, or further assistance, please refer to the manufacturer's official resources or contact their customer service department directly. Always ensure you are using official documentation for specific wiring instructions relevant to your setup.