SC_R9 RGBW LED SPI Controller Set
“
Specifications
- Model: SC+R9
- Type: RF 2.4G RGB/RGBW LED SPI Controller Set
- Output Signal: SPI
- Working Voltage: 5-24VDC
- Input Voltage: 3VDC (CR2032)
- Output Current: 8A
- Remote Distance: Up to 30m
- Dynamic Modes: 40 modes
Product Usage Instructions
Installation and Setup
1. Connect the SPI controller to the LED lights according to the
wiring diagram provided.
2. Power the controller with a 5-24VDC power supply.
3. Match the RF remote with the receiver by following the
instructions in the user manual.
Usage
1. Use the remote control to set the IC type and R/G/B/W order
for the connected LED lights.
2. Select from the 40 dynamic modes available on the remote,
including horse-race, chase, flow, trail, and gradual change
styles.
3. Adjust brightness, speed, and color settings using the remote
control buttons.
Maintenance
1. Replace the CR2032 battery in the remote if the LED indicator
is not functioning.
2. Ensure proper contact between the battery and remote
components for uninterrupted operation.
FAQ
How do I match the RF remote with the receiver?
To match the remote, short press the match key on the receiver
and within 5 seconds, press the on/off key on the remote.
What should I do if the LED indicator on the remote is not
working?
If the LED indicator is not functioning, it may be due to a dead
battery or poor contact caused by multiple plugging. Try replacing
the battery or adjusting the battery shrapnel with a
screwdriver.
“`
SC+R9
SPI
RF 2.4G RGB/RGBW LED SPI Controller Set
SC control LED lights with the following 49 kinds of compatible ICs: TM1803, TM1804, TM1809, TM1812, UCS1903, UCS1909, UCS1912, SK6813, UCS2903, UCS2909, UCS2912, WS2811, WS2812, WS2813, WS2815, TM1829, TLS3001, TLS3002, GW6205, MBI6120, TM1814B(RGBW), SK6812(RGBW), WS2813(RGBW), WS2814(RGBW), UCS8904B(RGBW), LPD6803, LPD1101,D705, UCS6909, UCS6912, LPD8803, LPD8806, WS2801, WS2803, P9813, SK9822, TM1914A, GS8206, GS8208, UCS2904, SM16804, SM16825, SM16714(RGBW), UCS2603, UCS5603, SM16714D, SM16703P, UCS7604(RGBW), UCS7804(RGBW). By RF remote controls you can select from a variety of dynamic lighting effects, adjust changing speed and brightness, set control pixels quantity, adjust R/G/B/W sequence, select IC type etc. you can also customize two kinds of scene modes to bring you fantastic color.
Features
Mini-style RF 2.4G multi-pixel RGB/RGBW controller with SPI signal output. Output SPI signal to control a variety of digital LED lights with the compatible ICs listed above.
IC type and R/G/B/W order can be set through the Remote. Adopt 2.4GHz wireless technology, remote distance up to 30m. Built in 40 dynamic mode, include horse-race, chase, flow, trail, gradual change style.
Technical Parameters
RF Remote Output signal Working voltage Standby time Remote distance Size
RF 2.4GHz
LED Receiver Input voltage
3VDC(CR2032)
Input current
1 years
Output signal
30m
Output dots
L107×W58.5×H9mm Size
5-24VDC 8A SPI (DATA / CLK)
Safety and EMC
EMC standard
EN IEC 55015/ EN IEC 61547 ETSI EN 301 489-1/-3
Safety standard
EN 61347-1/-2 EN 62493
1024 Max
Radio Equipment ETSI EN 300 440
L97×W33×H18mm Certi cation
CE RoHS FCC
Mechanical Structures and Installations
LED indicator Power input –
Power input + Installation rack
Match key
GND CLK signal output 33mm DATA signal output V+ Installation rack
97mm 18mm
User Manual Ver 2.0.5 2025.8
58.5mm
63.00 mm
68.00 mm 37.00 mm
107mm
9mm
58.5mm
CR2032 Battery
Note: 1. Before the first use, please remove the protective film on the battery. 2. If the LED indicator is not on when press key, it is due to dead battery or bad contact caused by multiple plugging, please replace the battery, or raise the battery shrapnel with a screw driver.
Wiring Diagram
SC connect with SPI spot light(TM1803) AC110-230V
Power Supply
SC
5-24VDC
Back holder
To fix the remote, two options are offered for selection: Option 1: fix the remote’ back holder on the wall with two screws. Option 2: adhere the remote’ back holder to the wall with paster.
SPI signal
SPI spot light
SC connect with one SPI pixel strips (WS2801) AC110-230V
Power Supply
SC
5-24VDC
SPI signal
VCK DA V+
LED pixel strip
SC connect with multiple SPI pixel strips (LED strip load over 8A) AC110-230V
Power Supply 5-24VDC
SC
Power Supply 5-24VDC
SPI Signal
Power Supply 5-24VDC
SPI Signal
Note: 1. If the SPI LED strip is a single-wire control method, the DATA and CLK signal line outputs of the controller are same,
and one controller can connect 2 LED strips. 2. When the load exceeds 8A, the light strip needs to be powered by other power supplies.
Only DATA/CLK and GND cables are connected between the controller and the light strip. 3. The output power of the constant voltage power supply is at least 1.2 times that of the output load (light strip),
otherwise the full power output of the load will easily cause the lights to icker or shake automatically.
Match RF Remote
1. Match: Short press match key of the receiver, within 5s, press on/off key of the remote. 2. Delete: Long press match key of the receiver for 5s, delete all matched remote.
Page 1-2
Remote Function
Speed+ Bright+
Speed-
Bright-
Mode+ Mode-
R/G/B+/-
“1”/Red, “2”/Green, “3”/Blue, “4”/Yellow, “5”/Purple, “6”/Cyan, “7”/Orange, “8”/Grape, “9”/Grass green, “0”/Natural white
Mode+/-: Short press switch dynamic mode built in controller, long press 2s Mode+ run mode cycle,
On/Off
long press 2s Mode- run the first mode. Default 32 dynamic modes, long press the Mode+ key for 2s will automatically
get the current number of dynamic modes of the controller.
Scene
Speed+/-: Adjust dynamic mode speed, short press 10 levels, long press 2s get the fastest / slowest speed.
White Special function
key
Bright+/-: Adjust brightness, short press 10 levels, long press 1-5s for continuous 256 levels adjustment. R/G/B+/-: Adjust R/G/B brightness respectively, short press 10 levels, long press 1-5s for continuous 256 levels adjustment.
White: Adjust white color, short press turn on/off white(RGB mix), long press 1-5s for continuous 256 levels saturation adjustment.
Scene: Two scene memory, short press recall the scene, long press 2s save current color into the scene.
Dynamic Mode List
No.
Name
P01 Red horse race white ground, forward
P02 Green horse race white ground, forward P03 Blue horse race white ground, forward
P04 Yellow horse race blue ground, forward
P05 Cyan horse race blue ground, forward P06 Purple horse race blue ground, forward
P07 7 color multi horse race, forward
P08 7 color horse raceclose + open
P09 7 color multihorse raceclose + open
P10 7 color scan close + open
P11 7 color multi-scan close + open
P12 Blue White chase, forward P13 Green Cyan chase, forward P14 RGB chase, forward
P15 7 color chase, forward P16 Blue meteor, backward
P17 Purple meteor, backward
P18 White meteor, backward
P19 7 color meteor, backward P20 Red oat, forward
No.
Name
P21 Green oat, forward P22 Blue oat, forward P23 Purple oat, forward
P24 RGBW oat, forward
P25 Red Yellow oat, forward
P26 Green Cyan oat, forward
P27 Blue Purple oat, forward
P28 Blue White oat, forward
P29 6 color oat, forward
P30 6 color smooth sectionally, forward
P31 7 color jump sectionally, forward
P32 7 color strobe sectionally, forward
P33 White horse race (RGB jump)
P34 White smooth horse race (RGB smooth)
P35 White starlight (RGB random jump)
P36 White smooth starlight (RGB random smooth)
P37 White ow, forward
P38 White ow, forward on + backward off
P39 White ow, forward on + backward on
P40 White oat
Note: P33-P40 dynamic modes are applicable to SPI type white light strip. P33-P36 dynamic modes, if the color SPI strip is connected, the corresponding color effect will appear.
User Manual Ver 2.0.5 2025.8
Compatible IC Type
No. C11
C12
C13 C14 C15 C16 C17 C18 C19 C21
TM1803
IC type
Output signal DATA
TM1809, TM1804, TM1812, UCS1903, UCS1909, UCS1912, SK6813, UCS2903, UCS2909, UCS2912, WS2811, WS2812,
WS2813, WS2815, SM16703P
DATA
TM1829 TLS3001,TLS3002 GW6205 MBI6120 TM1814B(RGBW) SK6812(RGBW),WS2813(RGBW), WS2814(RGBW) UCS8904B(RGBW)
LPD6803,LPD1101,D705, UCS6909,UCS6912
DATA DATA DATA DATA DATA
DATA
DATA
DATA,CLK
No. C22
C23 C24 C25 C31 C32 C33 C34 C35 C36 C37 C38 C39
C41 C42
IC type LPD8803,LPD8806 WS2801,WS2803 P9813 SK9822 TM1914A GS8206,GS8208 UCS2904 SM16804 SM16825 SM16714(RGBW) UCS5603 UCS2603 SM16714D UCS7604(RGBW) UCS7804(RGBW)
Output signal
DATA,CLK DATA,CLK DATA,CLK DATA,CLK
DATA DATA DATA DATA DATA DATA DATA DATA DATA DATA DATA
Use Remote Set SPI LED Strip
Set LED strip length [Pixel number(8~1024)]. * + 3 number + * for example: *032*, set pixel number to 32. *600*, set pixel number to 600. *1024*, set pixel number to 1024.
Set LED strip chip type. * + 2 number + * *11*TM1803 *12*TM1809,TM1804,TM1812,UCS1903,UCS1909,UCS1912,SK6813,UCS2903,UCS2909, UCS2912,WS2811,WS2812,WS2813,WS2815, SM16703P *13*TM1829 *14*TLS3001,TLS3002 *15*GW6205 *16*MBI6120 *17*TM1814B(RGBW) *18*SK6812(RGBW),WS2813(RGBW),WS2814(RGBW) *19*UCS8904B(RGBW) *21*LPD6803,LPD1101,D705,UCS6909,UCS6912 *22*LPD8803,LPD8806 *23*WS2801,WS2803 *24*P9813 *25*SK9822 *31*TM1914A *32*GS8206,GS8208 *33* UCS2904 *34* SM16804
Page 3-4
*35* SM16825 *36* SM16714(RGBW) *37* UCS5603 *38* UCS2603 *39* SM16714D *41* UCS7604(RGBW) *42* UCS7804(RGBW) Set LED strip RGB order. * + 1 number + * *1*RGB, *2*RBG, *3*GRB, *4*GBR, *5*BRG, *6*BGR. Set RGBW LED strip RGB and W order. *7*Wafter RGB *9*W before RGB Example: *1* + *7* set RGBW order, *1* + *9* set WRGB order.
Restore Factory Default Settings
Factory default parameters: RGB light type, pixel length 300, C12 chip type. 1. Long press the match key for 10s, restore the factory default parameter settings,and set RGB color light and W white light
can be turned on at the same time (When changing the chip type to RGBW lighting). 2. Long press the match key for 15s, restore the factory default parameter settings, and set RGB color light and W white light
can not be turned on at the same time (When changing the chip type to RGBW lighting).
Safety Information
1. Read all instructions carefully before you begin this installation. 2. When installing battery, pay attention to the battery positive and negative polarity.
A long time without the remote control, remove the battery. When remote distance becomes smaller and insensitive, replace the battery. 3. If no response from the receiver, please re-match the remote. 4. Gently handle remote, beware of falling. 5. For indoor and dry location use only. 6. Remove and immediately recycle or dispose of used batteries according to local regulations and keep away from children. Do NOT dispose of batteries in household trash or incinerate. 7. Even used batteries may cause severe injury or death. 8. Call a local poison control center for treatment information. 9. Compatible battery type is CR2032 and the nominal battery voltage is 3V. 10. Non-rechargeable batteries are not to be recharged. 11. Do not force discharge, recharge, disassemble, heat above 55ºC or incinerate.
Doing so may result in injury due to venting,leakage or explosion resulting in chemical burns. 12. Ensure the batteries are installed correctly according to polarity (+ and -). 13. Do not mix old and new batteries, different brands or types of batteries, such as alkaline, carbon-zinc, or rechargeable batteries. 14. Remove and immediately recycle or dispose of batteries from equipment not used for an extended period of time according
to local regulations. 15. Always completely secure the battery compartment. If the battery compartment does not close securely, stop using the product,
remove the batteries, and keep them away from children.
Statement
FCC ID Statement: Mobile RF Exposure Information This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. FCC Statement: This device complies wth Part 15 of the FCC Rules.operation is subject to the following two conditions: (1)this device may not cause harmful interference,and (2)this device must accept any interference received,including interference that may cause undesired operation. IC Statement: This Class B digital apparatus complies with Canadian ICES-003. (Cet appareil numérique de la Classe B conforme à la norme NMB-003 du Canada).
User Manual Ver 2.0.5 2025.8
Page 5-6
Documents / Resources
 |
Skydance SC_R9 RGBW LED SPI Controller Set [pdf] Instruction Manual SC_R9, SC R9, SC_R9 RGBW LED SPI Controller Set, SC_R9, RGBW LED SPI Controller Set, LED SPI Controller Set, SPI Controller Set |