SKYCA Bluetooth Module
Product Information
Specifications:
- Bluetooth Module with RCA Jack
- Power Input: 12V
- Color Coding: Red for 12V+, Black for 12V-
- Bluetooth Name: YONGJIANGXIA
Installation Instructions
Pls make sure your radio has two RCA Jack at the rear view.
The installation is simple.
- Remove your radio from the car dash.
- Plug the Red and White RCA of the bluetooth module into the socket back of your radio.
- Connect the red wire to 12V+,and the Black wire to 12V-
- Reinstall your radio back to the Car Dash.
Instructions for use
How to play music with this bluetooth module.
- Turn on the engine.
- Pair your phone with our bluetooth module with this name: YONGJIANGXIA
- Choose AUX from your radio panel.
- You can play music in your phone through car speakers.
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and use d in accordance with the instructions, may cause harmful interference to radio com munications. However, there is no guarantee that interference will not occur in a pa rticular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
The antennas used for this transmitter must be installed to provide a separation dis tance of at least 20 cm from all persons and must not be co‐located for operating in conjunction with any other antenna or transmitter.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that m ay cause undesired operation.
Documents / Resources
 |
Skyca SKYCA Bluetooth Module [pdf] User Guide 2BODB-SKYCA, 2BODBSKYCA, SKYCA Bluetooth Module, SKYCA, Bluetooth Module, Module |
