SKYBASIC G40-M Endoscope Camera with Light
Specifications
- Dimensions: 85*120mm
- Product: HD Industrial Endoscope
- Model: G40-M
- Display: 4.3 inch HD color display
- Camera: Small diameter HD camera with LED auxiliary
lighting - Power: 5V 1A
Product Description
G40-M is a high-precision industrial endoscope camera with a 4.3 inch HD color display. It features an ergonomic design, making it easy to operate and allows real-time viewing of high-definition images. The camera is equipped with a small diameter HD camera with LED auxiliary lighting and a high-sensitivity chip for operation in dark environments.
Safety and Maintenance
Battery Instructions: Please use a 5V 1A household charger to charge the equipment. Fast charging is not supported. Ensure the device is charged at least once every 3 months to prevent battery damage from excessive discharge.
FAQ
Lags during photo output: Check power or restart the device.
Imaging screen not clear: Calibrate distance or clean camera lens.
PRODUCT DESCRIPTION
G40-M is a high-precision industrial endoscope camera with 4.3 inch HD color display. It adopts ergonomic design, Easy to operate, real-time viewing of high-definition real images.This product is equipped with a small diameter HD camera with LED auxiliary lighting. The camera adopts a high-sensitivity chip, which can be used normally even in a dark working environment.
SAFETY AND MAINTENANCE
- The product is an industrial endoscopy camera and is not intended for medical use or human examination.
- Do not hit the camera violently and do not pull the cable.
- When used in an environment with sharp bumps, please use it carefully to prevent the waterproof protective layer of the probe from being scratched.
- The camera probe is not made of heat-resistant and high-temperature materi als. When checking the automobile engine, please ensure that the tempera ture in the engine drops to the normal emperature.
- When not in use, please ensure that the lens and the main unit are clean anddry, and avoid contact with oil, etc. or other corrosive and dangerous substances.
- This product is not suitable for people with limited physical, sensory ormental abilities.
- Do not allow children to touch and operate this equipment. BATTERY INSTRUCTIONS
- Please use a（5V 1A） household charger that meets the safety regulations to charge the equipment. Fast charging is not supported.
- This device supports charging while using.
- lf the device is not used for a long time, please ensure that it is charged at least once every 3 months to prevent irreparable damage caused by excessive discharge of the battery.
FUNCTION INTRODUCTION
Power button
Press and hold for 3 seconds to turn on and off the power of the machine- LED adjustment “+”
The brightness of the LED light can be gradually increased from 0-60-80-100% - Restore settings
All functional states are restored to the state when the device was first turned on - Enhance sharp contrast
Clear contrast gradually increases from weakened-normal-enhanced, which can improve the degree of detail restoration] 6 To rotate
The picture is rotated 180 degrees, easy to adjust the angle, better observation - Zoom in
Image magnification 1.0-1.5-2.0x incrementally - LED adjustment “-”
The brightness of the LED light gradually decreases from 100-80-60-0% - Black and white
Through it, you can switch between black and white for better effects in dark environments. - Reduce sharp contrast
When your clear contrast is strongest, you can use it to gradually weaken the clear contrast, from strengthen-normalweaken to return to normal - Zoom out
After the picture is enlarged, it can be adjusted to return to normal 2.0-1.5-1.0x gradually decreasing
Charging Guide
- Connect the device to the Type-C adapter for charging(5V 1A). The product does not support fast charging.
- The red signal light is always on when charging, and the green light is always on when the product is fully charged.
FAQ
- Lags happened during the photo outputting of the product
Please check whether the product has sufficient power, or restart the device. - Imaging screen is not clear
The best imaging focal length of the product is: 2cm-10cm, please calibrate the distance to the object, or clean the front of the camera with a clean alcohol cloth. - Product charging
Please use (5V 1A) charger to charge the device.The product does not support fast charging. - The camera is heat
It is normal for the camera to heat up, especially when the camera LED light is on at the highest brightness.But it does not affect normal use or service life.
Accessories installation Guide
Accessories
Hook(1)，Magnet(1)，Mirror(1)，Fixing device(3
Installation diagram
Specifications
| Camera diameter: 8mm |
| Camera resolution: 1920*1080 |
| Viewing angle: 70° |
| Focusing range: 20-100mm |
| Auxiliary lighting: 8 adjustable brightness LEDs |
| Screen type: 4.3-inch color display |
| Charge port: Type-C |
| Battery: 2000mAh |
| Battery life: 3.5 hours |
| Battery charging time: 3 hours |
| Operating temperature: -14°F~113°F |
| Camera temperature: -14°F~176°F |
| Shutdown power consumption：30uA |
| line length：1/5/10/20/30m |
Documents / Resources
 |
SKYBASIC G40-M Endoscope Camera with Light [pdf] Instruction Manual G40-M Endoscope Camera with Light, G40-M, Endoscope Camera with Light, Camera with Light, Light |
