VIGI Solar Mount
Quick Installation Guide
This guide provides instructions for installing the VIGI Solar Mount. Please refer to the VIGI Solar System Controller's installation guide for detailed instructions.
Note: Images may differ from actual products. The VIG 200W Solar Mount is used for demonstration in this guide.
Package Contents
[1x]
Mounting Bracket
[1x]
Pole Clamp
[2x]
L-Bracket
[2x]
Mounting Plate
[4x]
M8*16 Bolt
[2x]
M10*220 Bolt
[1x]
M5*20 Bolt
[5x]
M8 Washer
[5x]
M10 Washer
[19x]
M6*12 Screw
[1x]
M8*16 Kit
[1x]
M5*20 & M10*120 Kit
[1x]
M8*16
[1x]
M8*20 Kit
[1x]
M3*25 Kit
[1x]
Wrench
Installation
The VIGI Solar Mount is designed to work with VIGI Solar Panels and the VIGI Solar System Controller. For detailed installation instructions, please consult the VIGI Solar System Controller's installation guide.
For technical support, the user guide, and other information, please visit https://support.vigi.com.
Recycling Information (Italian):
- Scatola (Box): Carta (Paper) - PAP 21/PAP 20
- Busta di Plastica (Plastic Bag): Plastica (Plastic) - PET 1/LDPE 4/HDPE 2/7 >PP+PE<
- Cartoncino (Cardboard): Carta (Paper) - PAP 22/PAP 20
- Plastica Espansa (Expanded Plastic): Plastica (Plastic) - 7 EVA/LDPE 4
- Guscio di Plastica (Plastic Shell): Plastica (Plastic) - PS 6/PVC 3
- Pellicola Plastica (Plastic Film): Plastica (Plastic) - LDPE 4/PET 1
Please check your local municipality's disposal regulations.
TP-Link declares that the solar mount complies with the essential requirements and other relevant provisions of directives 2011/65/EU and (EU)2015/863.
The original EU declaration of conformity can be found at https://www.tp-link.com/en/support/ce/.
TP-Link Product Support - Wireless Networking Equipment Support
CE Regulatory Compliance | TP-Link
