VIGI Intelligent Solar Power Supply System

About This Guide

This document provides detailed instructions for the installation of the VIGI Intelligent Solar Power Supply System, including load devices and waterproof cable attachments. For further assistance, please refer to the full Installation Guide included in the package.

It is recommended to use VIGI solar panels with VIGI solar system controllers for optimal performance.

Installation Overview

The installation process involves several key steps:

1. Product Installation: Securely mount the main unit.
2. Load Device Installation: Connect and install your connected devices, such as PTZ cameras.
3. Waterproof Cable Attachments: Ensure all cable connections are properly sealed for weather resistance.

Configuration

A typical network topology for the solar system controller is illustrated, showing connections to solar panels and network devices like 4G cameras or access points.

The configuration is completed using the TP-Link VIGI app:

1. Download and install the latest TP-Link VIGI app from your device's app store.
2. Open the app and log in with your TP-Link ID. Create an account if you don't have one.
3. Add the solar system controller by tapping the '+' button and following the in-app instructions.

Once added, the solar system controller integrates into your network, providing power to your devices and allowing for remote management via the VIGI app.

FAQ (Frequently Asked Questions)

This section addresses common issues:

• Abnormal Controller LED Status: Troubleshooting tips for SYS, LAN, PV, and BAT LEDs.
• Short System Runtime/Monitoring Time: Guidance on issues related to battery board disconnection, blocked solar panels, or inefficient equipment systems.

For detailed solutions, please consult the full FAQ in the guide.