Acer Nitro XZ320QR 31.5-inch FHD Curved Gaming Monitor Instruction Manual

1. Úvod

This manual provides essential information for the safe and efficient use of your Acer Nitro XZ320QR 31.5-inch Full HD Curved Gaming Monitor. Please read these instructions thoroughly before operating the device and retain them for future reference.

2. Vlastnosti produktu

The Acer Nitro XZ320QR monitor is designed to deliver an immersive and responsive visual experience. Key features include:

• 31.5-inch Full HD (1920 x 1080) Display: Enjoy crisp, clear visuals with vibrant colors.
• Zakrivená obrazovka 1500R: Poskytuje pohlcujúci viewzážitok, ktorý obklopuje vaše zorné pole.
• Obnovovacia frekvencia 75 Hz: Ensures smoother motion and reduced blur for fast-paced content.
• 1ms zvýšená vizuálna odozva (VRB): Minimizes ghosting and motion blur for sharp images.
• Technológia AMD FreeSync: Synchronizes the monitor's refresh rate with your graphics card for tear-free and stutter-free gameplay.
• Podpora HDR 10: Zvyšuje kontrast a presnosť farieb pre dynamickejší obraz.
• Zero-Frame Design: Maximizes screen space and is ideal for multi-monitor setups.
• Ergonomický stojan: Offers tilt, height, and swivel adjustments for comfortable viewing.
• Montáž na VESA: Compatible with 100 x 100mm VESA mounts for flexible installation options.
• Pripojenie: Includes 1 x HDMI 1.4 Port and 1 x VGA Port.

3. Nastavenie

3.1 Rozbalenie

Carefully remove all components from the packaging. Ensure all parts listed in the packing list are present and undamaged. Keep the original packaging for future transport or service needs.

3.2 Montáž stojana

1. Monitor položte obrazovkou nadol na mäkký, čistý povrch, aby ste predišli poškriabaniu.
2. Attach the stand neck to the back of the monitor until it clicks into place or is securely fastened with screws (if applicable).
3. Attach the stand base to the stand neck and tighten the screw(s) from the bottom.

3.3 Pripojenie monitora

1. Pripojte napájací kábel k napájaciemu vstupu monitora a potom do elektrickej zásuvky.
2. Connect the HDMI cable (included) or a VGA cable from your computer's video output to the corresponding port on the monitor.
3. Zapnite počítač a monitor. Monitor by mal automaticky rozpoznať vstupný signál.

4. Návod na obsluhu

4.1 Zapnutie/vypnutie

Stlačením tlačidla napájania umiestneného na monitore ho zapnete alebo vypnete. Kontrolka napájania sa rozsvieti, keď je monitor zapnutý.

4.2 Navigácia v ponuke OSD (On-Screen Display)

Use the control buttons (usually located on the back or bottom right of the monitor) to access and navigate the OSD menu. The OSD allows you to adjust various display settings.

4.3 Úprava nastavení displeja

V ponuke OSD môžete upravovať nastavenia, ako napríklad:

• Jas/kontrast: Upravte celkový jas a rozdiel medzi svetlými a tmavými oblasťami.
• Nastavenia farieb: Jemné doladenie teploty farieb, gamy a jednotlivých úrovní RGB.
• Výber vstupu: Manuálne prepínanie medzi vstupmi HDMI a VGA.
• Režim obrazu: Select preset display modes optimized for gaming, movies, or standard use.

4.4 Using AMD FreeSync

To enable AMD FreeSync, ensure your graphics card supports FreeSync and that the feature is enabled in your graphics card's control panel. The monitor will automatically synchronize its refresh rate with your GPU when FreeSync is active.

4.5 Ergonomické nastavenia

The monitor stand allows for the following adjustments:

• tilt: Adjust the screen angle from -5 degrees to 20 degrees.
• výška: Raise or lower the screen within a 3.94-inch range.
• Otočný: Rotate the screen horizontally up to 15 degrees.

5. Údržba

5.1 Čistenie

To clean the monitor screen, gently wipe it with a soft, lint-free cloth. For stubborn marks, use a monitor-specific cleaning solution applied to the cloth, not directly to the screen. Avoid using abrasive cleaners or solvents.

5.2 Skladovanie

When storing the monitor for an extended period, power it off, disconnect all cables, and place it back in its original packaging if possible. Store in a cool, dry place away from direct sunlight and extreme temperatures.

6. Riešenie problémov

• Bez napájania: Ensure the power cable is securely connected to both the monitor and the power outlet. Check if the power outlet is functional.
• Žiadny signál: Verify that the video cable (HDMI or VGA) is correctly connected to both the monitor and your computer. Ensure the correct input source is selected in the OSD menu. Try restarting your computer.
• Rozmazaný alebo skreslený obrázok: Check the display resolution settings on your computer to ensure they match the monitor's native resolution (1920 x 1080). Adjust the refresh rate to 75Hz.
• Trhanie/sekanie obrazovky: Confirm that AMD FreeSync is enabled on both your graphics card and the monitor's OSD settings.
• Blikajúca obrazovka: Check cable connections. Reduce refresh rate if necessary, or update graphics drivers.

7. Špecifikácie

8. Záruka a podpora

Informácie o záruke a technickej podpore nájdete v záručnej karte, ktorá je súčasťou balenia produktu, alebo navštívte oficiálne stránky podpory spoločnosti Acer. webstránky. Uschovajte si doklad o kúpe ako doklad o kúpe pre prípad reklamácie.