CLEANmaxx 476 Cordless Vibrating Floor Mop User Manual

1. Úvod

Thank you for choosing the CLEANmaxx 476 Cordless Vibrating Floor Mop. This manual provides essential information for the safe and efficient operation, maintenance, and care of your new appliance. Please read these instructions thoroughly before first use and keep them for future reference.

2. Bezpečnostné pokyny

Aby ste predišli zraneniu alebo poškodeniu, dodržiavajte nasledujúce bezpečnostné opatrenia:

• Tento spotrebič je určený len na použitie v domácnosti. Nepoužívajte ho na komerčné účely.
• Udržujte spotrebič mimo dosahu detí a domácich zvierat.
• Neponárajte hlavnú jednotku do vody alebo iných tekutín.
• Use only the original power adapter supplied with the device for charging.
• Do not operate the appliance if it is damaged or malfunctioning. Contact customer support for assistance.
• Ensure the water tank is filled with appropriate cleaning solution and water. Do not use corrosive or flammable liquids.
• Always switch off the appliance and disconnect it from the power supply before cleaning or maintenance.
• The battery is integrated and not user-replaceable. Do not attempt to open the battery compartment.

3. Obsah balenia

Skontrolujte, prosím, či sú všetky položky prítomné a nepoškodené:

• 1x CLEANmaxx 476 Mop Head with integrated battery
• 1x Handle (3 parts for assembly)
• 1x Power Adapter/Charger
• 2x Microfiber Cleaning Cloths
• 1x Odmerka

Obrázok 1: All components included in the CLEANmaxx 476 package.

4. Nastavenie a prvé použitie

4.1 Montáž rukoväte

1. Connect the three handle parts by twisting them together until they are securely fastened.
2. Attach the assembled handle to the main mop head unit. Ensure it clicks into place.

4.2 Attaching the Microfiber Cloths

1. Place the mop head on a flat surface.
2. Align the microfiber cleaning cloths with the hook-and-loop fasteners on the underside of the mop head.
3. Press the cloths firmly onto the fasteners to secure them.

Obrázok 2: Securing the microfiber cleaning cloths to the mop head.

4.3 Nabíjanie batérie

1. Before first use, fully charge the mop's integrated lithium-ion battery.
2. Connect the power adapter to the charging port on the mop head and then to a power outlet.
3. The LED indicator lights on the mop head will show the charging status. A full charge typically takes approximately 2.5 hours.
4. Once fully charged, disconnect the adapter. The mop provides up to 50 minutes of active runtime on a full charge.

4.4 Naplnenie vodnej nádrže

1. Locate the water tank cap on the mop head.
2. Open the cap and use the provided measuring cup to fill the 230 ml tank with clean water and your preferred floor cleaning solution. Do not overfill.
3. Bezpečne zatvorte uzáver nádržky na vodu.

5. Návod na obsluhu

5.1 Zapnutie/vypnutie

• To turn on the mop, press the power button located on the handle. The mop will begin vibrating.
• To turn off the mop, press the power button again. The mop will automatically switch off if held vertically for a few seconds.

Obrázok 3: Location of the power button on the handle.

5.2 Using the Spray Function

• While the mop is powered on, press the spray button on the handle to dispense cleaning solution onto the floor.
• Release the button to stop spraying.

Obrázok 4: Mop spraying cleaning solution during use.

5.3 Používanie LED svetla

• The integrated LED light automatically illuminates when the mop is in operation, providing visibility in dark areas or under furniture.

Obrázok 5: LED light illuminating the cleaning path under furniture.

Obrázok 6: The mop head with its LED light activated.

5.4 Technika čistenia

• Guide the mop across the floor with gentle pressure. The vibrating function assists in effortless cleaning.
• Use the spray function as needed to moisten the floor.
• The mop is designed for various hard floor surfaces.

6. Údržba a starostlivosť

6.1 Cleaning the Microfiber Cloths

• After each use, remove the microfiber cloths from the mop head.
• The cloths are machine washable at a low temperature (e.g., 30°C) without fabric softener.
• Allow them to air dry completely before reattaching or storing.

6.2 Vyprázdnenie a čistenie nádrže na vodu

• After each use, empty any remaining liquid from the water tank.
• Rinse the tank with clean water to prevent residue buildup.
• Allow the tank to air dry before closing the cap.

6.3 Čistenie hlavice mopu

• Wipe the exterior of the mop head with a damp handričkou. Nepoužívajte abrazívne čistiace prostriedky ani neponárajte zariadenie do vody.

6.4 Skladovanie

• Store the mop in a dry place, away from direct sunlight and extreme temperatures.
• Ak batériu skladujete dlhší čas, uistite sa, že je čiastočne nabitá, aby sa zachoval jej stav.

7. Riešenie problémov

Ak problém pretrváva aj po vyskúšaní týchto riešení, kontaktujte zákaznícku podporu.

8. Technické špecifikácie

• Číslo modelu: 476
• Značka: CLEANmaxx
• Rozmery (D x Š x V): 40.01 x 35.99 x 11.99 cm
• Hmotnosť: 3.6 kg
• Voltage: 240 Volts (Charger Input)
• Batéria: Integrated Lithium-ion, 2000mAh
• Doba spustenia: Až 50 minút
• Kapacita nádrže na vodu: 230 ml
• Materiál rukoväte: hliník
• Mop Head Material: Mikrovlákno
• Vlastnosti: Cordless, Vibrating Function, Spray Function, LED Light

9. Záruka a zákaznícka podpora

This CLEANmaxx product is covered by a standard manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions.

For technical assistance, spare parts, or warranty claims, please contact your retailer or the CLEANmaxx customer service department. Contact information can typically be found on the product packaging or the official CLEANmaxx webstránky.