Siretta logo

SNYPER-LTE+/Spectrum
(EU/USA)
Quick start guide+

Siretta SNYPER LTE Graphyte Network Signal Analyzer

SNYPER-LTE+/Spectrum Case Contents

  1. SNYPER-LTE+ or SNYPER-LTE+ Spectrum
  2. PSU with 4 Adapter Heads
  3. 0.5M USB Cable
  4. USB Car Charger
  5. Omni-directional Antennas – General Purpose (Blue) and 2600MHz (Silver/Grey)
  6. LiveSCAN Directional Antenna (Spectrum model only)
  7. 1.5M Extension Cable for LiveSCAN Antenna (Spectrum model only)

FIRST STEP BEFORE LISE

Symbol BATTERY CHARGE
Charge the unit for 4-6 hours or until the red charge light is extinguished.

Symbol SET TIME

  1. Power up the SNYPER Power ButtonSiretta SNYPER LTE Graphyte Network Signal Analyzer - Power
  2. Select ‘Setup’ from the ‘Main Menu’
  3. Select ‘Set Time’
  4. Use the keypad arrows to set the date/time
    Use the Back key BACK key to exit

SOFTWARE UPDATE
Go to https://www.siretta.com/snyper-plus to check for the latest software.

Symbol Your SNYPER is now ready to use

SURVEY

Symbol NEW SURVEY OPTIONS

  1. Select Full, LTE, UMTS, or GSM*
  2. Press OK to start survey
  3. Leave the device to complete the survey

*The SNYPER-LTE+ (USA) does not survey the GSM band.

Symbol POST SURVEY OPTION 1

  1. Select ‘Show Results’
  2. Press OK to start LiveSCAN (Spectrum only)
    Use Back key BACK key to exit

Symbol POST SURVEY OPTION 2

  1. Select ‘Show Summary’
    Use Back key BACK key to exit

Symbol POST SURVEY OPTION 3

  1. Select ‘Save Results’
    This is only necessary if AutoSave is off
    Use Back key BACK key to exit

SAVED RESULTS

STORED SURVEY

  1. Select results file you wish to view
  2. Select ‘Show Results’, ‘Show Summary’ or ‘Export Results’
    Use Back key BACK key to exit

SETUP

Symbol Language: ENG/DEU/FRA/ITA/SPA
Display: Screen brightness and text colors
Auto-off: Auto switch off and dimming
Documents: File types and AutoSave
Sound: On/Off
System: Mode and region of operation
Set Time: Set date and time
Reset Menu: Return to default settings
Use Back key BACK key to exit

ABOUT

Key reference parameters about the device
Use key to exit

PC CONNECT

Symbol PC CONNECT

  1. Connect USB cable between device and PC
  2. Select ON to enable USB connection, begin results download
  3. Copy files required to PC
  4. Select OFF to disable the connection
    Use Back key BACK key to exit

You can then view results files on your PC

For more detailed information, please visit our website:

www.siretta.com
+44 (0)118 976 9000
Siretta Ltd, Basingstoke Road, Spencers Wood, Reading, Berkshire, RG7 1PW, UK

Documents / Resources

Siretta SNYPER-LTE+ Graphyte Network Signal Analyzer [pdf] User Guide
SNYPER-LTE, SNYPER-LTE Spectrum, SNYPER-LTE Graphyte Network Signal Analyzer, SNYPER-LTE Graphyte, Network Signal Analyzer
Siretta SNYPER [pdf] User Guide
SNYPER

References

Leave a comment

Your email address will not be published. Required fields are marked *