Instructions
SM-ACC-INFR Infrared Motion Sensor
Infrared Motion Sensor Wiring Diagram (12 VDC System Only)
Installation Instructions:
- Connect white sensor wire to Security 1 (pink) on the wiring cable.
- Connect green sensor wire to DC common ground.
- Connect black sensor wire to DC common ground.
- Connect red sensor wire to +9VDC to +16VDC power source.
(DO NOT EXCEED +16V DC).
Product SKU: SM-ACC-INFO
Documents / Resources
 |
siren marine SM-ACC-INFR Infrared Motion Sensor [pdf] Instructions SM-ACC-INFR Infrared Motion Sensor, SM-ACC-INFR, Infrared Motion Sensor |
