Singke AP021C Wireless Video Microphone

Foreword
Dear user: Thank you for choosing dual wireless camera microphone. In order to better understand the use of this product, it is recommended that you read this manual carefully before use.

Features

• Original lightning connector, no more worry about IOS ecosystem, and safe to use.
• Three-in- one universal receiver, lavalier design, compact and convenient.
• 2.4G wireless transmission technology, stable transmission distance can be up to 120 meters.
• Real-time monitoring, free switching of three volume levels.
• Three noise reduction modes can be switched freely, to meet accurate pickup in any complex environment.
• Support TF card local audio storage, no more worry abcut file loss.
• The microphone can be used as a recording pen alone, and the recording can be saved synchronously anytime and anywhere in any environment.
• Microphone and receiver with 3.5 mm cable which is used for camera can last 12 hours continuous interviews.
• Equipped with a charging case, the transmitter and receiver are more convenient to store and charge; interviews.
• The charging case has a large battery of 2000mAh that can be recharged, which is the first choice for travel and make a Live.

Applications
Live, Vlog, Video-shooting, Interview and others.

Packing List

• Charging case(two mic and one receiver)—————————————— 1 PCS
• Mi crophone tran smitter ——————————————————–2PCS
• 3 in 1 Receiver· – —————————————————————–· 1 PCS
• Audio cable ———————————————————————· 1 PCS
• Charging cable ——————————————————————· 1 PCS
• Earphone ———————————————————————-·lPCS
• Wind-proof·——————————————————————–·2PCS
• User manual·——————————————————————-·lPCS

Specifications

Charging case

• Input voltage: DC 4.8V-5.4V
• Charging time: 90 mins
• Weight: about 128.2g
• Battery capacity: 2000 mAh
• Recharge times: recharge 3 times for microphone and receiver
• Charging case size: 111*79*34.4mm

Microphone specification

• Frequency: 2.4GHz
• Latency: 25 ms
• Frequency response range: 20-20KHz
• DC: 4.8-5.4V
• Sensitivity: -26 dBFS
• Microphone size: 47.1*15.04*15.61mm
• Battery: 230mAh
• Working time: 12 hrs
• Charging time : about 80 mins
• Weight: about 14g
• S/N Ratio: 64 dB

Receiver specification

• Frequency: 2.4GHz
• Latency: 25 ms
• Frequency response range: 20-20KHz
• DC: 4.8-5.4V
• Microphone size: 47.5*13.47’7.95mm
• Battery: 230mAh
• Working time: 12 hrs
• Charging time : about 80 mins
• Weight: about 18. 7 g

Functions

1. Charging case indicator light
2. Type-C charging port
3. 3.5mm monitoring port
4. 3.5 mm adapter cable port
5. Type-C receiver
6. Power /reset button
7. Volume/noise key
8. lndicator light on the receiver
9. Lightning receiver
10. Power /Mute key •2
11. Indicator light on the microphone •2
12. Reset key on the transmitter *2
13. TF memory card slot •2

Microphone transmitter functions

Power on	1.Open the charging case and take out the microphone 2.Click the power button	Green light for one second
Power off	1.Put it in the charging case and close the cover 2.Press power button for 3 secs
Search for pairing	No pairing object	Greenlightflashesslow!y
Paired	Connection succeeded	Green light is always on
Clear pairing/re-pairing	Three-click the power button within 10 secs after power on	Red and green light flashes quickly
Mute/pick-up	Click the power button to switch mute/pick-up Mute: stop recording Pick-up: start recording
		Mute:the green light flashes quickly
		Pick-up Green light is always on
Charging	Put 11 in the charging case and close the cover	Charging Blue light flashes
		Fully charged: Blue light off
Low power	Below 3.3 V voltage	Red light flashes quickly
Automatic power-off	Below 3.3V or no connection for over 15 minutes	Light off
TF card automatic Recording	After lhe connection is successful, it will automatically enter the TF card recording mode.	Green light is at ways on
Use the microphone as a recorder alone f no pair with receiver 1	Click the power button to switch to start recording/ stop recording (auto save the file)	Blue light flashes slowly when recording and green tight flashes slowly when stopping recording
when the microphone has no TF card	Recording fails	Blue light is always on
The microphone has a TF card but the TF card is damaged	Recording fails	Blue light is always on

Receiver functions

State
Power on	1.Open the charging case and take out the receiver 2.Click the power button	Green light for one second
Power off	1.Put it in the charging case and close the cover 2Press power button for 3 secs
Search for painng	No pairing object	Green light flashes slowly
Paired	Connection succeeded	Green light is always on
Clear pairing/re-pairing	Three-click the power button within 10 secs after power on	Red and green light flashes quickly
Charging	Put it in the charging case and close the cover Mute: stop recording Pick-up: start recording	Charging: white light flashes
		Fully charged: white light off

Charging case specification

Charge the case	Charging withType-C cable	Charging: red light is always on
		Fully charged: the light is off
Ballery level indicator of charging case	Open the case/indicator light:100%-75%	Green light is on for 10 secs
	Openthecaselindicatorlight:74%-36%	Bluelightisonfor 10secs
	Openthecaselindicatorlight:35%-13%	Red light flashes
Charge two transmillers	Put two transmitters in the case and close the cover	Charging:the green, blue light flashes
		Fully charged: corresponding lights are off
Charge the receiver	Put the receiver in the case and close the cover	Charging: white light flashes
		Fully charged:white lights off

Charge multiple device	Put two transmitters and receiver in the case and close the cover	Charging:White, blue and green light flashes alternately in turn
		Fully charged: corresponding lights are off

Note: The TF card will automatically save a new recording file every time. When the capacity of the memory card is full, the oldest recording file will be automatically deleted.

Connection instruction

After taking out the device, the indicator lights of the microphones on the receiver and transmitter are always green, it is paired successful. (See as below picture)

Mobile phone connection instruction
Plug the Lightning receiver/Type-C receiver into the Lightning porVType-C port of the mobile phone, and the green light of the receiver is always on, and the microphone can be used to pick up sound.

Camera connection instructions
Plug the 3.5mm cable into the receiver and the 3.5mm hole of the camera respectively, the green light of the receiver is always on, and the microphone can be used to pick up sound.

Windows Notebook Operation
Turn on the receiver and connect the TPYE-C port to the TPYE-C jack of the computer, or insert the 3.5 adapter cable to the audio input jack, click the “Speaker” icon at the bottom right of the computer, and then open the sound settings, “Sound” setting option and then click the bottom of the page to select “Voice Input” option, select the corresponding “Microphone” option to confirm.

Desktop Windows operation
Turn on the receiver, plug in the 3.5mm adapter cable to the audio input port of the host computer, click the Speaker icon at the bottom right of the computer, and then open the sound settings, the “Sound” setting option, and then click the “Sound Input” option at the bottom of the page, and select the corresponding “Microphone” option to confirm.

MacBook operation
Turn on the receiver and connect the TPYE-C port to the TPYE-C socket of the MacBook. On the MacBook, select the “Settings” option, then click the “Sound” , then select the “Sound output” option, click to select “Speaker”, and then confirm; then select the “Sound input” option, click to select “Microphone -Wireless microphone” , Click Confirm to use.

Turn on OTG (only for Android system)
Take OPPO A72 model as an example

Instructions for installing the receiver to the camera
Before installing to the camera, use the receiver’s back clip to clip on the camera shoe and then fix.

Wool cover installation instruction
Align the plastic buckle of the wool cover with the groove of the transmitter , insert it and then rotate 90° clockwise to fix it.

Label Meanings 

According to the test results obtained based on RL2004/108/EG (Electro magnetic Compatibility Directive) and RL2006/95/EG (Low Voltage Directive), this product complies with the limits specified in the European Community EMC (Electromagnetic Compatibility) Directive, an integration of relevant laws from its member states.

Changes or modifications not expressly approved by the complying party may cause the user to lose permission to operate the device.
This device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation.

This symbol indicates that.according to WEEE (Waste of Electrical and Electronic Equipment)Directive(2012/19/EU) and national laws, this type of waste should not be discarded along with your household waste.as it contains potentially hazardous substances that may pose a negative impact on the environment and human health. It should be handed over to an authorized WEEE collection facility for recovery and recycle. Herewith you will be helping effective utilization of natural resources.For more information on disposal of WEEE products, please contact your local municipality, waste management bureau or household waste dispcsal service.

Safety Instructions

To avoid electric shock, overheat, fire, radiation, explosion, mechanical risk and injury or property loss due to improper use, please read and observe the following items before use:

1. Please check if the power of the connected equipment matches with that of this product before operation. Adjust the volume to proper level during operation.Do not operate at over-power or high-volume level for extended time to avoid product malfunction or hearing impairment.
2. If there is any abnormality during use (e.g., smoke. strange odor),please kill the power switch and unplug from power source, then send the product to the local dealer for repair.
3. Keep this product and its accessories in a dry and ventilated area.Do not store in a humid or dusty area for extended time. Keep away from fire, rain, liquid intrusion,bumping, throwing,vibrating,or from blocking any ventilation openings, to prevent malfunction.
4. Please abide by safety rules during operation.Do not use the product in places prohibited by laws or regulations to avoid accident.
5. Do not disassemble or repair the product by yourself to avoid injury. If you have any questions or require any services, please contact our local dealer.

About This Manual
This manual contains up-to-date technical specifications as of printing. However, specifications contained herein may not conform to your particular product since Takstar is constantly improving its products. For the latest version/more information please visit our website: https://www.takstar.com/
Specifications, devices or accessories available may vary from region to region.If you have any questions please contact our local dealer.

Documents / Resources

Singke AP021C Wireless Video Microphone [pdf] User Manual AP021C Wireless Video Microphone, AP021C, Wireless Video Microphone, Video Microphone, Microphone

References

• User Manual