Sinco CHOCOLATE Wireless MIDI Controller User Manual

Foreword

Thank you for purchasing our products!
This product is a wireless MIDI pedal with APP control. At the same time, we can also use it on the computer. We will use this manual to introduce you in detail about the use of this product and some common problems in use.

Product Feature Introduction

• Portable midi pedal, small and exquisite.
• Charging for 2.5 hours, can be used for 12 hours.
• The display screen can directly feedback the commands you issued, intuitive and clear.
• WINDOWS, MAC, IOS, ANDROID and other platforms are all compatible.
• The built-in host interface allows for direct control of the effector
• Advanced customization mode with switchable bank
• Customization of keyboard combination keys

Notice

1. Power supply:
   Please make sure to use the correct 5V±10% power adapter to charge this product. The maximum working voltage must be less than 6V, otherwise it may cause equipment be damaged. Please turn off the device when you don’t use this product.
2. Electrical interference:
   Such as radios, televisions and electromagnetic waves may cause interference to the equipment, so please try to stay away from equipment with larger electromagnetic waves.
3. Placement environment:
   In order to prevent deformation, discoloration and other damages to this product, please avoid the following environment:
   A. heat source
   E. high humidity
   B. magnetic field
   F. dusty or dirty place
   C. direct sunlight
   D. high temperature and humidity
   G. strong vibration or shaking.

Panel Description Introduction

1. Foot switch A
2. Combination E
   Press foot switch A and B at the same time
3. Foot switch B
4. Display screen
5. Foot switch C
6. Combination F
   Press foot switch C and D at the same time
7. Foot switch D
8. Type-C charging and data jack
9. Power switch
10. Wireless instruction light UOH US
11. Charging instruction light
12. Pedal jack
13. Midi host

(9)Power switch

U Interface: (8) USB MIDI interface can be used, Connect to a computer or other device for use. (13) Host interface is invalid
H Interface: (8) interfaces can only provide power. (13) interface can be connected to other effectors for control.

(13) Midi host

Integrating midi system into chocolate allows for the connection of different devices, including standard five core midi interface devices or USB MIDI interface devices. For detailed connection methods, please scan the QR code at the back of the product for viewing.

Instructions

Operation	Button/Instruction	Display
Power ON	Toggle switch(9)	(4)Display is on
Charging instruction	(8)Connect to the power supply	(11) Red light means charging(11) Blue light means charging finished
Wireless connection	Connect to the name of the device: footcare plus	(10) Light is flashing means connection failed(10) Light is on and didn’t flash means connection succeeded

Please scan the QR code on the back of the product to download the APP and user instructions for detailed operation.

Technical Parameters

Power Input	Standard 5V direct current
Average working current	45mA
Battery Model/Type	602030
Battery capacity	3.7V
Battery Nominal Voltage	300mAh
USB connection type	Type-C
Product size	212(L)x36(W)x17(H)mm
Product weight	280g
Size with box	227(L)x55(W)x35(H)mm
Weight with box	350g
Accessories	power cable x 1

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement.

The device can be used in portable exposure condition without restriction. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, inducing interference that may cause undesired operation.

Documents / Resources

Sinco CHOCOLATE Wireless MIDI Controller [pdf] User Manual 2ARCP-CHOCOLATE, 2ARCPCHOCOLATE, CHOCOLATE Wireless MIDI Controller, CHOCOLATE, Wireless MIDI Controller, MIDI Controller, Controller

References

• User Manual