SimplyTech SPLUS02 Wireless HeadPhone

SPECIFICATION

CONTENTS

• 1 x Headphone,
• 1 xAUXAudio Cable,
• 1 x USB Charging Cable.
• 1 x Manual

CHARGING YOUR HEADPHONES

1. Use the charging cable provided and plug into the port on the LEFT ear cup.
2. Plug the other end into any USB charging port.
3. LED indicator near the USB input will turn red while charging. Once charging is fully complete, the LED will turn off
4. NOTE: To prevent damage, it is recommended to use the charging cable that is provided

SAFETY a CARE INSTRUCTIONS

• Do NOT expose any portion of this product to liquid, humidity, moisture, sharp objects, or extreme temperatures as this can damage it and void the warranty.
• Do NOT attempt to disassemble or modify the headphones in any way.Spot Clean ONLY.
• Keep out of reach of children. This product is not a toy.

POWERING ON & OFF

• Press and hold the power button for 3 seconds to turn on or off.

BLUETOOTH PAIRING WITH YOUR DEVICE

1. Fully charge your headphones, then press and hold the POWER button until the LED lights flash red and blue. SOUL + will automatically enter pairing mode
2. Pairing mode will last for 2 minutes. While in pairing mode, turn ON the Bluetooth Connection on your device, Scan/Search & select SOUL +.
3. Once paired, SOUL + will voice prompt ‘connected successfully. ‘
4. NOTE: Power on SOUL + and they will automatically connect to the last connected device if available within the BT range.

FCC  STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses\ and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning statement:

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

WARRANTY

TECHNICAL SUPPORT & WARRANTY INFO

This product is backed by a One-Year Warranty from defects. For warranty replacements, questions, or if you have any issues about this product, contact us at help@SimplyTechCorp.com.
SimplyTech Electronics Inc. declared that radio equipment is compliant with Directives 2014/53/EU, 2011/65/EU & 2012/19/EU.

CONTACT

• EU Declaration of Conformity for this product can be viewed at www.SimplyTechCorp.com/docs.
• DISTRIBUTED BY: SimplyTech Electronics, Inc. 1407 Broadway New York, NY 10018
• MADE IN CHINA
• Please read before using this product and retain manual for future reference.

Documents / Resources

SimplyTech SPLUS02 Wireless HeadPhone [pdf] User Manual SPLUS02, 2BKTL-SPLUS02, 2BKTLSPLUS02, SPLUS02 Wireless HeadPhone, SPLUS02, Wireless HeadPhone, HeadPhone

References

• User Manual