Simonrack 28501213 Simonclassic Additional Shelf Instructions
Product
Never exceed the specified maximum load per shelf and for the entire rack
Make sure the load is evenly distributed over the entire shelf to avoid point loads.
Follow the assembly instructions carefully and make sure all screws and fasteners are tight
Shelving units must be firmly anchored to the wall to achieve maximum load capacity.
Perform regular inspections to ensure there are no structural damages or loose parts.
Use proper lifting equipment and techniques to place and remove heavy loads and prevent injury or damage.
Do not climb on the shelves or use them as ladders.
Only use on flat surfaces.
Ensure that the area around the shelves is free of obstacles to ensure safe working.
Read the entire manufacturer’s instruction manual carefully and follow all listed safety precautions. Before use, read all manufacturer information. Warning instructions cover some risks but not all. Keep manuals for reference.
Products should never be used by children or by persons with reduced physical, sensory or mental abilities or lack of experience and knowledge unless the manufacturer’s manual explicitly allows. Children should never play unsupervised. Cleaning and maintenance must not be performed by children.
Risk of suffocation, packaging materials are not toys, keep packaging out of reach of children and people with reduced abilities.
Manufacturer
Simonrack
C/ Polígono, C, 50461, Alfamén, (Zaragoza) ESPAÑA
info@simonrack.com
Documents / Resources
 | Simonrack 28501213 Simonclassic Additional Shelf [pdf] Instructions 28501213, 28501213 Simonclassic Additional Shelf, Simonclassic Additional Shelf, Additional Shelf, Shelf |