SIMLAB new2025_SLF006 Swivel Mounting Point
Product Specifications
- Profile: 80×40
- Mounting Point Type: Swivel
- Version: 1.01
- Last Updated: 18-12-2024
Before You Start
Thank you for purchasing this Sim-Lab product! On the following pages, you will find detailed instructions on assembly. This requires only a set of simple tools and some of your time. Please check the bill of materials before starting (page 9) and make sure all the parts are delivered.
When adding side mounts, ease of entry is a recurring topic that customers bring up. We wanted to be bableto open and close the side mount to get in and out of your cockpit more easily. Our magnetic catch keeps our swivel mounting point closed during use and solves this problem once and for all! Please take heed of the warnings on the packaging/parts if these apply to you. Do not hesitate to ask for help or supervision during assembly, value your health. This product only consists of what the name implies. To be able to mount joysticks or throttles, you will need to make an additional purchase of the appropriate accessory such as the ‘Joystick Mount’ or ‘Throttle Mount.’
Inserting Slot-Nuts
You got excited, finished the build, and put the caps on but forgot to install one element. Do not worry. It happens to everyone. In this diagram, you can see how to insert a Slot-Nut directly into the slot from the side. You can also use one of your smaller Hex wrenches to help wiggle the Slot-Nut in place.
Tools needed
CENTER POST PROFILE KIT
If you still have some questions regarding the assembly of this product or about the manual itself, please refer to our support department. They can be reached at support@sim-lab.eu.Alternatively, we now have a Discord server where there are quite some experienced Sim-Lab customers hanging out. They might just help you along if you ask them nicely 😉 www.sim-lab.eu/discord. If you feel like printing this manual, please consider the environment before doing so. For the best results, make sure you print at 100% scale without borders.
Assembly Steps
- Start by inserting Slot-Nuts into the designated slots, as shown in the diagram.
- Follow the assembly sequence provided in the manual, ensuring all components are securely attached.
- Use the appropriate tools to tighten bolts and adjust tensions as needed.
- Handle the magnet base with care due to its strong magnetic properties.
| CENTER POST PROFILE KIT | |||
| # | Part | QTY | Note |
| A1 | 80X40 Length=450mm | 1 | |
| A2 | 80X40 Length=400mm | 1 | |
| HARDWARE KIT | |||
| A3 | Magnet base | 1 | |
| A4 | Magnet catch | 1 | |
| A5 | Corner bracket | 2 | |
| A6 | Corner bracket cap | 2 | |
| A7 | Joint 40 | 2 | |
| A8 | Profile 80×40 end-cap | 3 | |
| A9 | Bolt M8 X 16 DIN 912 | 8 | |
| A10 | Bolt M6 X 16 DIN 912 | 2 | |
| A11 | Bolt M6 X 16 DIN 7991 | 2 | |
| A12 | Washer M8 DIN 125-A | 4 | |
| A13 | Washer M6 DIN 125-A | 2 | |
| A14 | Slot-Nut M8 | 8 | |
| A15 | Slot-Nut M6 | 4 | |
Maintenance Tips
Periodically check and tighten any loose components to maintain the stability and functionality of the swivel mounting point.
FAQs
Q: What should I do if I encounter difficulties during assembly?
A: If you face any challenges during assembly, please contact our support department at support@sim-lab.eu for assistance. You can also join our Discord server, where experienced customers can provide guidance.
Q: How can I ensure the durability of the product?
A: Regularly inspect the mounting point for any signs of wear or damage. Keep all components clean and free from debris to prolong the lifespan of the product.
Documents / Resources
 |
SIMLAB new2025_SLF006 Swivel Mounting Point [pdf] Instruction Manual new2025_SLF006, new2025_SLF006 Swivel Mounting Point, new2025_SLF006, Swivel Mounting Point, Mounting Point, Point |