SIM LAB SLF006 Swivel Mounting Point

Product Specifications

• Model: Swivel Mounting Point
• Version: 1.0
• Last Updated: 10-10-2024
• Profile: 80X40
• Slot-Nut: M8 and M6
• Length: 400mm and 450mm
• Tools Needed: 4/5/6MM Hex Wrenches

Product Usage Instructions

Before You Start

Make sure you have all the necessary components listed in the manual before starting the assembly process.

Assembly Steps

1. Insert Slot-Nuts into the designated slots as shown in the diagram.
2. Use a smaller Hex wrench to assist in placing the slot nuts securely.
3. Take care when handling the magnet base as it is very strong.
4. Ensure the magnet catch is properly installed to prevent swiveling of the mounting point during use.
5. Adjust the countersunk bolts on the joints to adjust tension as needed.

Frequently Asked Questions

• Q: What should I do if I have questions about the assembly or the manual?
  • A: If you have any questions, please contact our support department at support@sim-lab.eu for assistance.
• Q: Is there a community where I can seek help from experienced users?
  • A: Yes, we have a Discord server where experienced customers can assist. Visit www.sim-lab.eu/discord to join.
• Q: Any tips for printing the manual?
  • A: If you decide to print the manual, consider the environment and print at 100% scale without borders for best results.

BEFORE YOU START

• Thank you for purchasing this Sim-Lab product! On the following pages, you will find detailed instructions on assembly. This requires only a set of simple tools and some of your time.
• Please check the bill of materials before starting and make sure all the parts are delivered.
• When adding side mounts, ease of entry is a recurring topic that customers bring up. We wanted to be able to open and close the side mount, to get in and out of your cockpit more easily.
• Our magnetic catch keeps our swivel mounting point closed during use and solves this problem once and for all!
• Please take heed of the warnings on the packaging/parts if these apply to you. Do not hesitate and ask for help or supervision during assembly, we value your health.
• This product only consists of what the name implies. To be able to mount joysticks or throttles, you will need to make an additional purchase of the appropriate accessory such as the ‘Joystick Mount’ or ‘Throttle Mount’.

Inserting Slot-Nuts:

• You got excited, finished the build, and put the caps on, but forgot to install one element. Do not worry. It happens to everyone. In this diagram, you can see how to insert a Slot-Nut directly into the slot from the side.
• You can also use one of your smaller Hex wrenches to help wiggle the Slot-Nut in place.

Tools needed

• CAUTION Interaction with metallic objects may produce Pinch Hazards.
• Persons with Medical Implants KEEP BACK 12 inches.
• Strong Magnetic Field

INSTALLATION INSTRUCTION

HARDWARE KIT

CENTER POST PROFILE KIT
#	Part	QTY	Note
A1	80X40 Length=450mm	1
A2	80X40 Length=400mm	1
HARDWARE KIT
A3	Magnet base	1
A4	Magnet catch	1
A5	Corner bracket	2
A6	Corner bracket cap	2
A7	Joint 40	2
A8	Profile 80×40 end-cap	3
A9	Bolt M8 X 16 DIN 912	8
A10	Bolt M6 X 16 DIN 912	2
A11	Bolt M6 X 16 DIN 7991	2
A12	Washer M8 DIN 125-A	4
A13	Washer M6 DIN 125-A	2
A14	Slot-Nut M8	8
A15	Slot-Nut M6	4

• If you still have some questions regarding the assembly of this product or about the manual itself, please refer to our support department. They can be reached at support@sim-lab.eu
• Alternatively, we now have a Discord server where there are quite some experienced Sim-Lab customers hanging out. They might just help you along if you ask them nicely www.sim-lab.eu/discord
• If you feel like printing this manual, please consider the environment before doing so. For the best results, make sure you print at 100% scale without borders.

Documents / Resources

SIM LAB SLF006 Swivel Mounting Point [pdf] Instruction Manual SLF006, SLF006 Swivel Mounting Point, SLF006, Swivel Mounting Point, Mounting Point, Point

References

• User Manual