SIIG 04-1309B Audio Extractor and HDR to SDR Conversion
USER MANUAL
1×4 HDMI 2.0a Splitter with Built-in & User Adjustable EDID Management, Audio Extractor and HDR to SDR Conversion
Features
- Support HDMI 2.0, 4K@60 4:4:4 8bits
- Support HDCP 2.2 & 1.4
- Support HDR which is 4K2K@60 4:2:0 1 Obits
- Video bandwidth 18Gbps
- Support default EDID and EDID learning
- When HDMI output 4 connect to display support audio extraction via Tosi ink & 3.5mm
- HDMI Audio Format: PCM2/5.1/7.1,
- Dolby 5.1/7.1, DTS 5.1/7.1
- Extract Audio Format: PCM2, Dolby 5.1, DTS 5.1
- Support resolution downscaling from 4K2K to 1080P
- Output 4 supports HDR to SDR conversion
- Support AVR mode has more audio format
- Support Dolby Vision by EDID learning
Package contents
- 4-Port HDMI 2.0 Splitter
- Power adapter DC 5V/2A
- Quick Start Guide
Layout
1. Power LED: Lights on when device is ready
2. Power Jack: Connect to DC 5V/2A power
3. Micro-USB Port: For F/W update
4. Dip Switch for F/W update & HDR to SDR
5. Stereo 3.5mm output: PCM 2
6. Toslink output: PCM2, Dolby 5.1 & DTS 5.1
7. HDMI IN: Connect with HDMI source
8. Signal LED: Input signal LED indicator (light on when the device is connected to source and display)
9. EDID mode Dip Switch: (Please power cycle the device after setting EDID dip switch)
Learning EDID from output 1
1. Set the dip switch to [pin3, pin4]=[ ♦-♦]
2. Power on the device
3. It will learn EDID from output 1 (EDID learning can support Dolby Vision)
AVRmode
AVR mode still can support HDR and 4K downscale to 1080p, but it is compatible with more audio formats: Dolby Atmos, Dolby Digital, Dolby Digital+, Dolby TrueHD, DTS, DTS-HD Master, One Bit Audio, DVDAudio, LPCM.
*Only EDID learning mode can support Dolby Vision and Atmos simultaneously
10.Signal LED: Output 1-4 signal LED indicator
11.HDMI OUT 1-4: HDMI outputs to display
12.Downscale dip Switch
4K downscale to 1080p
Auto video scaling detects and configures the video resolution automatically according to the capabilities of each connected monitor.
Note: When the input source is 4K@60Hz, it will only output at 1080p @60Hz for 4K @30Hz monitors.
*720p and 480p monitors not supported
1. NOT supports
(1) Resolution downscaling from 4K2K@60 4:2:2 to 1080P
(2) Frame rate conversion
(3) 4K2K@60 4:2:2 to 4K2K@60 4:2:0
2. Splitter can bypass 4K HDR data content, but can NOT process it and make HDR content 100% fit into 1 OB Op
HDR to SDR
HDR to SDR function on output 4 can enable ONLY when
1. Source signal has HDR content,
2. The display does NOT support HDR
Support
For more info or tech support
http://www.siig.com/support
Documents / Resources
![]() |
SIIG 04-1309B Audio Extractor and HDR to SDR Conversion [pdf] User Guide 04-1309B Audio Extractor and HDR to SDR Conversion, 04-1309B, Audio Extractor and HDR to SDR Conversion, HDR to SDR Conversion, SDR Conversion |