LIGHTED MEDICINE CABINET
SKU: 955097
BEFORE YOU BEGIN
We recommend consulting a professional if you are unfamiliar with this type of installation. Signature Hardware accepts no liability for any damage to the product, wall, electrical components or for personal injury during installation.
Observe all local building codes.
Unpack and inspect the product for shipping damage.
If any damage is found, contact our Customer Relations team via live chat at www.signaturehardware.com or by emailing support@signaturehardware.com.
GETTING STARTED
Ensure that you have gathered all the required materials that are needed for the installation.
TOOLS AND MATERIALS:
INSTALLATION
- Identify your preferred orientation, landscape or portrait.
- Measure the location of each screw hole on the wall and mark using a level.
- Drill pilot holes for each screw.
- If installing on a solid material, insert the screw anchors into each pilot hole.
- Tighten each screw by hand using a screwdriver.
- Be sure to confirm the power is shut off to the circuit.
- Install the wiring as shown in the diagram below.
- Hang the mirror, shaking it lightly onto the hanging bar to ensure it is stable
- Turn on the power.
1.855.715.1800
signaturehardware.com
Documents / Resources
 |
SIGNATURE HARDWARE 955097 Rectangular LED Mirror [pdf] Instruction Manual SH662054LED, SH662059LED, SH662060LED, 955097 Rectangular LED Mirror, 955097, Rectangular LED Mirror, LED Mirror |