SIGNAL TECHNOLOGY Three Mode Surface Mount and Hideaway Resources
Product Information
Specifications
- Voltage (DC): 9V to 30V
- Operating Temperature: -34 to 158°F
- LED Color: See Label
- Accessories: 2x self-tapping screws, foam gasket, and manual
Product Usage Instructions
Pattern Selection
Briefly touch the yellow wire to Positive (+) to advance the flash pattern forward one. Hold the yellow wire to Positive (+) for three seconds to revert to the default pattern (pattern 1 – steady).
Color Combination Selection
Quickly touch the yellow wire to Positive (+) consecutively three times to change the color combination. Choose from 15 different single, dual, tri, and quad color combinations. Hold the yellow wire to Positive (+) for eight seconds to reset the color combination to the default combination (quad color).
Synchronization
Connect the yellow wires of units that you would like to synchronize, then hold them all to Positive (+) for three seconds to reset all of their flash patterns. Select your desired flash pattern. You may find that certain flash patterns can be synchronized with other select patterns (eg: Patterns 2 & 4).
This is a feature unique to our products! Not all patterns are guaranteed to synchronize with all other patterns.
Alternating Synchronization
After establishing synchronization with all of your desired units, connect the white wire of selected units you would like to alternate to Positive (+). These units’ flash pattern will now alternate flash from the other units whose white wires are not powered.
FAQ
Q: Can I synchronize units with different flash patterns?
A: Yes, certain flash patterns can be synchronized with other select patterns, but not all patterns will synchronize with each other.
Pattern Selection
Briefly touch the yellow wire to Positive (+) to advance the flash pattern forward one. Hold the yellow wire to Positive (+) for three seconds to revert to the default pattern (pattern 1 – steady).
Color Combination Selection
Quickly touch the yellow wire to Positive (+) consecutively three times to change the color combination. Choose from 15 different single, dual, tri, and quad color combinations. Hold the yellow wire to Positive (+) for eight seconds to reset the color combination to the default combination (quad color).
Synchronization
Connect the yellow wires of units that you would like to synchronize, then hold them all to Positive (+) for three seconds to reset all of their flash patterns. Select your desired flash pattern. You may find that certain flash patterns can be synchronized with other select patterns (eg: Patterns 2 & 4). This is a feature unique to our products! Not all patterns are guaranteed to synchronize with all other patterns.
Alternating Synchronization
After establishing synchronization with all of your desired units, connect the white wire of selected units you would like to alternate to Positive (+). These units’ flash pattern will now alternate flash from the other units whose white wires are not powered.
| Specification Overview | |
| Voltage (DC) | 9V to 30V |
| Operating Temperature | -34 to 158 F |
| LED Color | See Label |
| Accessories | 2x self-tapping screws, foam gasket, and manual |
| Flash Patterns | |
| 1 | Steady (Default) |
| 2 | Quintuple I |
| 3 | Consecutive Quintuple I |
| 4 | Quad |
| 5 | Consecutive Quad |
| 6 | Double – Slow |
| 7 | Consecutive Double – Slow |
| 8 | Single |
| 9 | Consecutive Single |
| 10 | Triple – Slow |
| 11 | Consecutive Triple – Slow |
| 12 | Quintuple II |
| 13 | Consecutive Quintuple II |
| 14 | Double – Medium |
| 15 | Consecutive Double – Medium |
| 16 | Single – Slow |
| 17 | Consecutive Single – Slow |
| 18 | Single – Moderate |
| 19 | Consecutive Single – Moderate |
| 20 | Single – Medium |
| 21 | Consecutive Single – Medium |
| 22 | Single – Fast |
| 23 | Consecutive Single – Fast |
| 24 | Single – Hyper |
| 25 | Consecutive Single – Hyper |
| 26 | Double – Fast |
| 27 | Triple – Fast |
| 28 | Quad + Single – Moderate |
| 29 | Quad + Single – Fast |
| 30 | Twinkle |
| 31 | Combo |
Documents / Resources
 |
SIGNAL TECHNOLOGY Three Mode Surface Mount and Hideaway Resources [pdf] Instructions Three Mode Surface Mount and Hideaway Resources, Mode Surface Mount and Hideaway Resources, Surface Mount and Hideaway Resources, Mount and Hideaway Resources, Hideaway Resources, Resources |
