SIGMA-ENGINEERED-SOLUTIONS-logo

SIGMA ENGINEERED SOLUTIONS 14210 Single Pole 15A 120V Switch

SIGMA-ENGINEERED-SOLUTIONS-14210-Single-Pole-15A-120V-Switch-product

Product Specifications

  • Model Number: 14210
  • Product Name: Outlet Box Cover – Gray
  • Includes: Gasket and screws
  • Voltage: 120V
  • Amperage: 15A
  • Switch Type: Single Pole
  • Material: Non-metallic
  • Manufacturer: Sigma Engineered Solutions
  • Origin: Made in India
  • Listing: Listed Outlet Box Cover 35D8

Product Usage Instructions

  1. Ensure the power source is turned off before installation.
  2. Open the outlet box and position the cover with the ON orientation at the top.
  3. Make sure the toggle switch is in the OFF position.
  4. Attach the gasket to the outlet box according to the provided instructions.
  5. Securely mount the cover onto the outlet box using the provided screws.

FAQ

  • Q: Is this product suitable for outdoor use?
    • A: This product is designed for indoor use only.
  • Q: What should I do if I encounter a defective gasket?
    • A: Contact customer support for a replacement gasket.
  • Q: Can I use this cover with a different amperage switch?
    • A: It is recommended to use a switch that matches the amperage specified for this cover.

Product Information

Outlet Box Cover – Gray Toggle • All-weather

  • Includes gasket and screws.
  • Items that are shaded are included in this package.

WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov.

INSTALLATION INSTRUCTIONS

SIGMA-ENGINEERED-SOLUTIONS-14210-Single-Pole-15A-120V-Switch-fig-1

Warning: Improper wiring of any electrical device can cause serious injury or death. These wiring devices should only be installed by a certified electrician or other qualified person.

Caution: This product should be installed in accordance with the National Electrical Code and all applicable local codes and standards.

TURN OFF POWER BEFORE INSTALLING

  1. Wire switch according to manufacturer’s instructions.
  2. Mount switch to outlet box in proper orientation with switch turned OFF.
  3. Close any holes in outlet box according to manufacturer’s instructions.
  4. Remove tear-outs from gasket as required to fit appropriate device.
  5. Using provided screws, mount gasket and cover to outlet box in proper orientation (ON at the top) with toggle in OFF position.

Made in India

SIGMA-ENGINEERED-SOLUTIONS-14210-Single-Pole-15A-120V-Switch-fig-2

SIGMA-ENGINEERED-SOLUTIONS-14210-Single-Pole-15A-120V-Switch-fig-3

Documents / Resources

SIGMA ENGINEERED SOLUTIONS 14210 Single Pole 15A 120V Switch [pdf] Instructions
14210 Single Pole 15A 120V Switch, 14210, Single Pole 15A 120V Switch, Pole 15A 120V Switch, 15A 120V Switch, 120V Switch, Switch

References

Leave a comment

Your email address will not be published. Required fields are marked *