SierraTeck B09SQBMFNG Talking PIR Motion Sensor
Specifications
- Power Source: 3x AAA 1.5V alkaline batteries (not included)
- Recording Duration: Up to 2 minutes
- Power/Volume Settings: High Volume, Low Volume, Power off
This guide will help you hit the ground running in no time!
STEP 1: Insert batteries (not included)
- Remove the battery cover and insert 3x AAA 1.5V alkaline batteries, noting the correct polarity.
- Use new alkaline batteries only. Used and/or other battery types may cause the unit to not function properly.
STEP 2: Turn on
- Turn on the device by sliding the power/volume switch to the middle or upper setting (low or high volume)
- When the device is turned on, it may take a few seconds for the sensor to warm up and start responding.
- During this time, it is normal for the device not to detect motion and/or double trigger.
STEP 3: Record Audio
- Press button “A” and hold for 3 seconds until you hear a beep. Start recording after the beep and keep the button pressed. Release the button to stop recording.
- If you hear another beep while recording, it means time is up. Up to 2 minutes of audio can be recorded. Button “A” must be kept pressed while recording, releasing the button will stop the recording.
- To hear back recorded audio, press button “B”. To stop playback, press button “B” again.
- If you hear a crackling sound, which indicates that your batteries are low, please replace them with new batteries.
- We test all units after manufacturing by pre-recording a human voice, this is normal and does not indicate unit is used.
STEP 4: Attach to Wall
- Using the 2 screws provided, attach th unit to the wall directly or use the ball mount parts supplied.
- Regardless of the method chosen, only the bottom 2 screw holes at the back of the unit are used, upper one is unused.
TIPS
- For indoor use. External use may result in moisture damaging the internals of the device and voiding the warranty.
- The top right corner of the device may have an opening that resembles a microSD card slot. This opening is for a different variation of this product and has no function or use on this unit.
- If there is any way we can assist you if you’ve encountered any issues whatsoever, please email us, we are here to help and make sure you are 100% satisfied.
FAQs
Q: Can I use rechargeable batteries with this device?
A: It is recommended to use new alkaline batteries only. Rechargeable or other battery types may cause functionality issues.
Q: How long does the indicator light stay on when motion is detected?
A: The indicator light turns on and stays on for the duration of playback when motion is detected.
Documents / Resources
 |
SierraTeck B09SQBMFNG Talking PIR Motion Sensor [pdf] User Guide B09SQBMFNG Talking PIR Motion Sensor, B09SQBMFNG, Talking PIR Motion Sensor, PIR Motion Sensor, Motion Sensor, Sensor |