INKBIRD Instant Read Meat Thermometer IHT-21K User Manual

හැඳින්වීම

This manual provides detailed instructions for the safe and effective use of your INKBIRD IHT-21K Instant Read Meat Thermometer. Please read this manual thoroughly before operation and retain it for future reference.

නිෂ්පාදනය අවසන්view

ප්රධාන ලක්ෂණ

• 0.5s Ultra Fast Reading and ±0.3℃ Super High Accuracy: Equipped with a K sensor for higher stability, accuracy, and efficiency in temperature measurement. Reads temperatures in just 0.5 seconds with an accuracy of ±0.3℃/±0.5℉.
• පුළුල් පරාසයක යෙදුම්: Temperature measurement range of -58.0℉ to 572℉ (-50.0℃ to 300℃), suitable for pan frying, deep frying, baking, home brewing, and beverages.
• IP65 Waterproof, Washable Body: Dustproof, waterproof, and oil-resistant. Can be washed directly under running water.
• Clear VA LCD with 2 Strong Magnets: One key locks the temperature reading. Premium VA LCD (1.57*0.78inch/40*20MM) for visibility even in sunlight. Two strong magnets on the back for convenient attachment to refrigerators.
• Temperature Unit Selection and Calibration: Switch between Celsius and Fahrenheit. Temperature calibration function ensures accurate readings.

පැකේජයේ අන්තර්ගතය

• Instant-Read Meat Thermometer x 1
• ආරෝපණ කේබල් x 1
• පරිශීලක අත්පොත x 1

සැලසුම

උපාංගය ආරෝපණය කිරීම

The INKBIRD IHT-21K thermometer is powered by a 500mAh rechargeable battery. Before first use, fully charge the device.

1. Locate the Type-C charging port on the thermometer.
2. Connect the provided charging cable to the thermometer and a suitable USB power source.
3. The battery indicator on the display will show charging status. A full charge typically takes approximately 1 hour.

Image: The thermometer connected to a charging cable, illustrating the Type-C port and battery indicator.

Initial Power On and Probe Deployment

1. To power on the thermometer, gently unfold the probe. The device will automatically turn on.
2. The display will illuminate, showing the current temperature.
3. To turn off, fold the probe back into the housing. The device features an auto-off function after 3 minutes in a locked state or 1 minute in an unlocked state to conserve battery.

Image: The thermometer with its probe extended, displaying a temperature reading, highlighting its fast response time.

මෙහෙයුම් උපදෙස්

උෂ්ණත්ව කියවීමක් ලබා ගැනීම

1. Unfold the probe to power on the device.
2. Insert the stainless steel probe into the thickest part of the food, avoiding bone or gristle.
3. Wait for approximately 0.5 seconds for the temperature reading to stabilize on the VA LCD screen.
4. The large VA LCD screen ensures clear visibility of the temperature, even in bright sunlight.

Image: The thermometer placed on a grill next to cooking meat, showing a clear temperature reading on its VA LCD screen.

අගුළු ක්‍රියාකාරිත්වය

To hold the current temperature reading on the display after withdrawing the probe from the food:

1. Press the "HOLD" button once. The reading will be locked on the screen.
2. Press the "HOLD" button again to unlock and resume live temperature measurement.

උෂ්ණත්ව ඒකක මාරු කිරීම (℃/℉)

සෙල්සියස් (℃) සහ ෆැරන්හයිට් (℉) අතර මාරු වීමට:

1. Locate the ℃/℉ button on the device.
2. Press the button to toggle between the two temperature units.

Image: The thermometer displaying temperature, with icons indicating Fahrenheit/Celsius switching and calibration features.

උෂ්ණත්ව ක්රමාංකනය

The thermometer features a calibration function to ensure accuracy. If you suspect the readings are inaccurate, you can calibrate the device:

1. Prepare a cup of ice water (a mixture of crushed ice and water). The temperature should be 0℃ (32℉).
2. Insert the probe into the ice water.
3. Refer to the user manual for specific button combinations or menu options to enter calibration mode. (Note: Specific calibration steps are often detailed in the printed manual or on the device itself, as they can vary.)
4. Adjust the reading to 0℃ (32℉) if necessary.

නඩත්තු කිරීම

පිරිසිදු කිරීම

The INKBIRD IHT-21K is IP65 waterproof, making it easy to clean:

1. After each use, fold the probe back into the thermometer.
2. Rinse the entire thermometer under running water.
3. Wipe it dry with a clean cloth.
4. Do not immerse the thermometer in water for extended periods or clean it in a dishwasher.

Image: A hand holding the thermometer under running water, illustrating its IP65 waterproof capability.

ගබඩා කිරීම

For convenient storage, the thermometer features two strong magnets on its back:

1. Attach the thermometer to metal surfaces such as a refrigerator door or oven side.
2. Ensure the storage location is clean and dry.
3. Avoid attaching the thermometer to the exterior of an oven during operation, as temperatures exceeding 80℃ (176℉) may damage the unit.

Image: The thermometer shown magnetically attached to a refrigerator, demonstrating its built-in magnets for easy storage.

දෝෂගවේෂණය

පිරිවිතර

වගකීම් සහ සහාය

For technical support, warranty information, or any inquiries regarding your INKBIRD IHT-21K thermometer, please contact INKBIRD customer service.

• විද්‍යුත් තැපෑල: support@ink-bird.com
• Webඅඩවිය: https://www.ink-bird.com/

INKBIRD typically offers a two-year warranty on its products. Please refer to your purchase documentation or the official INKBIRD webවඩාත්ම වත්මන් වගකීම් නියමයන් සහ කොන්දේසි සඳහා අඩවිය.