Schlage FE575 CAM 619 ACC Camelot Keypad Lock with Accent Lever Instruction Manual

හැඳින්වීම

This manual provides comprehensive instructions for the installation, setup, operation, and maintenance of your Schlage FE575 CAM 619 ACC Camelot Keypad Lock with Accent Lever. This electronic keyless entry system offers enhanced security and convenience for your home or office. Please read these instructions carefully before installation and use to ensure proper function and safety.

Figure 1: Schlage FE575 CAM 619 ACC Camelot Keypad Lock with Accent Lever, Satin Nickel finish. This image displays the complete lock assembly, including the exterior keypad and lever, and the interior lever and thumbturn.

ආරක්ෂිත තොරතුරු

Always follow basic safety precautions when installing and using this product to reduce the risk of injury, fire, or electric shock. Keep all components out of reach of children. Do not attempt to disassemble or modify the lock beyond the instructions provided. Use only the specified 9V alkaline battery for operation.

පැකේජයේ අන්තර්ගතය

ස්ථාපනය ආරම්භ කිරීමට පෙර සියලුම සංරචක පවතින බව තහවුරු කර ගන්න:

• Exterior Keypad Assembly with Accent Lever
• අභ්‍යන්තර ලීවර එකලස් කිරීම
• ලෑච් බෝල්ට්
• වැඩ වර්ජන තහඩුව
• සවිකරන ඉස්කුරුප්පු
• 9V ක්ෂාරීය බැටරි
• ස්ථාපන උපදෙස් (මෙම ලේඛනය)
• යතුරු (2)

රූපය 2: පුපුරා ගියේය view of the Schlage FE575 CAM 619 ACC Keypad Lock components, including the exterior keypad, interior lever, latch, and mounting hardware.

ස්ථාපනය

The Schlage FE575 CAM 619 ACC Keypad Lock is designed for easy installation, typically requiring only a screwdriver. It is suitable for standard door preparations and can replace most existing levers or knobs in approximately 30 minutes without hardwiring.

ස්ථාපනය සඳහා පියවර:

1. දොර සකස් කරන්න: Ensure your door has standard bore holes. If replacing an existing lock, remove it first.
2. අගුල ස්ථාපනය කරන්න: දොරේ කෙළවරට ලෑච් බෝල්ට් එක ඇතුළු කර ඉස්කුරුප්පු වලින් එය සවි කරන්න. ඔබේ දොරේ පැද්දීම සඳහා ලැච් එක නිවැරදිව දිශානුගත කර ඇති බවට වග බලා ගන්න.
3. බාහිර එකලස් කිරීම ස්ථාපනය කරන්න: Place the exterior keypad assembly onto the door, aligning the spindle with the latch mechanism.
4. අභ්යන්තර එකලස් කිරීම ස්ථාපනය කරන්න: Attach the interior lever assembly, connecting it to the exterior unit and securing it with the provided screws.
5. බැටරිය ස්ථාපනය කරන්න: Insert the 9V alkaline battery into the designated compartment within the interior assembly.
6. පරීක්ෂණ මෙහෙයුම: Close the door and test the lock's functionality using the pre-programmed codes and the key.

Setup & Programming User Codes

Your Schlage Keypad Lock comes with two pre-programmed user codes for immediate use. You can easily add, change, or delete up to 19 user codes directly from the keypad.

Keypad Features:

• Pre-programmed Codes: Two codes are ready for use out of the box.
• පරිශීලක කේත ධාරිතාව: Store up to 19 unique 4-digit user codes.
• තාවකාලික කේත: Easily create and delete temporary codes for guests or service providers.
• Keypad Illumination: The keypad numbers illuminate when pressed, making it easy to enter codes in low-light conditions.

ක්රමලේඛන පියවර:

Refer to the detailed programming guide included in your package for specific instructions on adding, changing, or deleting user codes. Generally, this involves entering a programming code followed by the desired user code and confirmation.

මෙහෙයුම් උපදෙස්

Unlocking with a Code:

1. Enter your 4-digit user code on the keypad.
2. The Schlage button will flash green, indicating a correct code.
3. Turn the lever to open the door.

ස්වයං-අගුළු විශේෂාංගය:

The auto-lock feature automatically re-locks your door approximately 5 seconds after a valid code is entered and the door is closed. This provides peace of mind, ensuring your door is always secured.

Manual Locking/Unlocking (Interior):

From the interior side of the door, the lock can be manually controlled:

• අගුලු හරින ලද ස්ථානය: When the thumbturn is in the vertical position, the door is unlocked and can be opened without a code.
• අගුලු දැමූ ස්ථානය: When the thumbturn is in the horizontal position, the door is locked from the outside. Entry from the outside requires a valid code or key.

යතුරු අභිබවා යාම:

In case of battery depletion or if you prefer, the lock can always be opened using the physical key provided. Insert the key into the keyhole below the keypad and turn to unlock.

නඩත්තු කිරීම

බැටරි ආදේශනය:

The lock operates on one 9V alkaline battery, which is included. With typical use, the battery life can extend up to 2 years. A dedicated low-battery indicator will alert you when replacement is needed. To replace the battery, access the battery compartment on the interior assembly, typically by removing a cover or a few screws.

පිරිසිදු කිරීම:

Clean the keypad and lever surfaces with a soft, damp රෙදි. නිමාව හෝ ඉලෙක්ට්‍රොනික සංරචක වලට හානි කළ හැකි උල්ෙල්ඛ පිරිසිදු කරන්නන් හෝ ද්‍රාවක වලින් වළකින්න.

දෝෂගවේෂණය

• අගුල ප්‍රතිචාර නොදක්වයි: Check the battery level. Replace the 9V battery if the low-battery indicator is on or if the keypad does not light up.
• කේතය ක්‍රියා නොකරයි: Ensure you are entering the correct 4-digit code. Try re-entering the code slowly and deliberately. If issues persist, refer to the programming guide to verify or reprogram user codes.
• Lever is stiff: Ensure the lock is properly lubricated and free from debris. Check for any obstructions in the door frame or latch mechanism.
• ස්වයංක්‍රීය අගුල ක්‍රියා නොකරයි: Verify that the door closes completely and the latch bolt fully extends into the strike plate.

පිරිවිතර

වගකීම් සහ සහාය

Schlage locks are backed by a limited lifetime mechanical and finish warranty, and a limited three-year electronics warranty. For full details regarding your warranty coverage and to access customer support, please refer to the official Schlage webවෙබ් අඩවියට පිවිසෙන්න හෝ ඔවුන්ගේ පාරිභෝගික සේවා දෙපාර්තමේන්තුව අමතන්න. වගකීම් හිමිකම් සඳහා ඔබේ මිලදී ගැනීමේ සාක්ෂි තබා ගන්න.