Shirui SI07E IFPD WiFi and Bluetooth Module

Product Information

Specifications

• Model: WiFi Module V1.0
• Date: 2024-3-20
• Compatibility: Interactive Intelligent Panel
• Functionality: Wireless network connectivity

Product Usage Instructions

Safety Warning
Before using the WiFi module, ensure the power cord of the Interactive Intelligent Panel is disconnected.

Installation Procedure

1. Loosen the screws and remove the bracket from the panel.
2. Secure the wireless device in place by tightening the removed screws to complete the installation.
3. Insert the WiFi module fully into the tablet device following the direction of the arrow.

Function

1. After installation, power on the Interactive Intelligent Panel.
2. Click on “Settings” on the screen.
3. Click on “Wireless Network” to open or close the wireless network.
4. Select Wi-Fi settings and connect to a network.

FAQ

• Q: Is the WiFi module compatible with all devices?
  A: No, the WiFi module is designed specifically for use with the Interactive Intelligent Panel.
• Q: How do I troubleshoot if I cannot connect to a Wi-Fi network?
  A: Ensure that the WiFi module is securely installed and try restarting both the panel and the module. Check for any network interference as well.

Note:
All the pictures in this manual are for reference only, subject to our available products.

Safety Warning

Before using and operating this device, please read thoroughly and comply with the following precautions to prevent accidents or inaccurate operations.

1. Placement
   1. DO NOT charge or use the device in dusty or wet conditions, to prevent internal circuit failure.
   2. Keep the device away from heat sources such as an electric heater.
   3. The normal operating temperature is 0-40℃, normal operating humidity is 10%-90%RH.
2. Children Safety
   1. The product and accessories may contain some small parts.
   2. Please place them beyond the reach of children in avoidance of swallowing danger.
3. Water Precaution
   1. The product is not waterproof, please keep it dry.
4. Maintenance
   1. When the equipment is damaged, please do not disassemble it for repair without permission, please call customer service to report for repair.
   2. Please contact professional service personnel for maintenance services.
   3. DO NOT insert any sharp or pointed object into the device.
   4. Prevent the device from falls and collisions with other objects, which may cause damage.

Statement

1. Intellectual property right statement: The hardware design and software of this product are covered by the patents. Anyone who reproduces this product or the content of the instruction without the authorization of the Company shall assume legal liabilities.
2. This manual is for reference only, and the actual function of the final product is subject to the actual function of the product received by the customer.
3. The picture is for reference only, please refer to the actual product. The company reserves the right to improve and change the appearance and design of the product without notice.

Installation Procedure

Warning:
Please make sure the power cord of the Interactive Intelligent Panel is disconnected before installation.

1. Loosen the screws and remove the bracket.
2. Insert the wireless device fully into the tablet device along the direction of the arrow.
3. Secure the wireless device in place by tightening the removed screws to complete the installation.

Note:
This WiFi module only works for the Interactive Intelligent Panel by plugging it into the above slot.

Function

After completing the installation, turn on the Interactive Intelligent Panel, and the WIFI module will run automatically.

1. Click “Settings” on the screen.
2. Click on “Wireless Network” to open/close the wireless network.
3. Click on the “ ” icon to open Wi-Fi.

Documents / Resources

Shirui SI07E IFPD WiFi and Bluetooth Module [pdf] User Manual SI07E, 2AFG6-SI07E, 2AFG6SI07E, SI07E IFPD WiFi and Bluetooth Module, SI07E, IFPD WiFi and Bluetooth Module, Bluetooth Module, Module

References

• User Manual