SHINETECH Bluetooth Tracker Device App User Guide

SHINETECH Bluetooth Tracker Device App

Overview

This Tag is activated and managed through the companion app. After powering on the Tag, you can activate it with your authorization code and use features like nearby acoustic search, location history, sharing, and retrieval.

Specifications

• Battery: CR2032 (positive “+” side facing up during install)
• Successful power-on indication: two beeps; red indicator light flashes twice
• App compatibility: iOS 12.0 / Android 8.0 or later
• Authorization code length: 10-digit authorization code
• Nearby acoustic tracking range (note): generally under 15 meters depending on environment
• Share feature: share with up to 12 guest accounts

Quick Guide

1. Remove the Tag insulation film and power on the Tag. Confirm it beeps twice and the red light flashes twice.
2. Install the app and grant requested permissions (Location, Bluetooth, Nearby Devices, Read/Write Storage, etc.).
3. Activate the tag in the app: main page → tap “+” → search Bluetooth name “myTag” (or “CityTag” / “CityFinder”) → select device → enter the 10-digit Authorization Code from the unique authorization card in your packaging → choose purpose and enter contact details → confirm activation.
4. Use functions from the app main page as needed (Nearby Search to ring within Bluetooth range, Tag List, Location History, Location Refresh).

Troubleshooting

• App installation issues (Android): Some configurations may auto-flag installation blocks. Suspend protective features (e.g., Huawei Purity Mode / Xiaomi Security Mode) before installing.
• Failed to add tag: Confirm Bluetooth is enabled, app permissions are fully granted, and the Tag is fully powered on. If it still fails, check cellular network/Wi‑Fi settings.
• No location data: Ensure the CR2032 coin battery is powering the tracker. If powered, test reception by taking the Tag to public, highly crowded locations to check cellular crowd-sourced reporting.
• Retrieve tag after changing phone: On the new phone, tap “+” on the home interface launcher, select “Retrieve,” and follow instructions to pair previously established units.
• Location deviation/inaccuracies: The device relies on crowd-sourced accessory network technologies rather than integrated hardware GPS; obstacles or rapid movement can cause minor displacement. Review location history paths for better context.
• No sound response in Nearby Search: Verify Bluetooth is enabled and battery life is strong. If the speaker prompt is grayed out, the accessory is out of range. If battery power drops extremely low, acoustic playback may disable to preserve core tracking services.

INSTRUCTION

Power on the Ta & Replace the Battery

Install the App

Please grant all permission requests (Location, Bluetooth, Nearby Devices, Read/Write Storage, etc.).

Tag Activation
App main page —+ + Search for Bluetooth name “myTag” —+ Select device Enter Auth. Code (10-digit number) — Choose purpose, enter contact details —+ Confirm —+ Successful

App main page functions

Tag function list

• Unbind: Reset the Tag and
  clear all location information,
• Rename: Modify the name,
  Share device
• Hide device: This Tag will not appear in the main interface,
  you can check it in settings.
• Share this device: Share with up to 12 people to view the
• Tag location,
  About: Tag activation date and machine code,

Nearby search
The Tag can play sound when within the phone’s Bluetooth  signal range. Bluetooth signal strength is affected by the environment, obstacles such as walls, metal, and the human body may weaken the signal.The working range Of nearby search is Often less than 15 meters (depending on the actual environment).

Add “Share Code”
After obtaining a share code, go to the bottom left corner of the App main page and tap ” + Select “Retrieve”

• Enter Share code
• Phone number or email
• Continue Sucæssful