Shinelite Electric FZ084S02 Multi Function Socket Instruction Manual

Connect your device to the desired charging port (USB, TYPE-C, or wireless charging zone).
If using wireless charging, ensure your device is compatible with Qi wireless charging technology.

For external stereo connection, plug the stereo output into the designated port (12V 0.5A).

Product overview

This multifunctional outlet has multiple charging capabilities, including USB and Type-C fast charging ports, as well as a 10W wireless charging zone, and is also an American Standard outlet with an input specification of 125VAC 60Hz.

And it can be connected to an external stereo that outputs 12V 0.5A.

Preparation for use

Check the appearance of the socket for damage and do not use it if damaged.

Plug the outlet into an electrical outlet that meets the 125VAC 60Hz specification.

Charging Function Use

USB and TYPE-C fast charging

Use the USB or Type-C charging cable that matches your device.
Plug one end of the charging cable into the USB or TYPE-C connector of the socket and connect the other end to the device to start charging.

10W Wireless Charging

Place the wireless charging-enabled device in the wireless charging area of the socket and make sure that the device fits well with the charging area.

Be careful not to have metal foreign objects or too thick phone cases on the back of the device to avoid affecting the charging efficiency.

American Standard Socket Use

Insert the American Standard plug directly into the American Standard socket hole of this socket to supply power to electrical equipment.
Be careful that the total power of the connected appliances does not exceed the rated power of the socket.

Audio Connections

Insert the power plug of the stereo into the audio port of this socket and turn on the stereo to use it.

Safety Precautions

Avoid use in humid environments to prevent the risk of electric shock.

Do not disassemble the socket by yourself; if it malfunctions, contact a professional for repair.
If not used for a long time, unplug it.

Do not connect overloaded power appliances to the socket, as this may cause a fire.
This receptacle is intended for use in 125VAC 60Hz voltage environments only. Do not use it at other voltages, as this may damage the receptacle and connected equipment.
The wireless charging function may vary depending on the wireless charging compatibility of your device. if it does not charge properly, please check if your device supports wireless charging.
When connecting the stereo, make sure that the rated voltage and current of the stereo match the output parameters of the socket to avoid damaging the stereo.

FCC Warnings

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference,
This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator and your body: Use only the supplied antenna.

Frequently Asked Questions

Q: Can I use all charging functions simultaneously?
- A: Yes, you can use multiple charging functions simultaneously as long as the total power draw does not exceed the device’s limits.
Q: Is there an indicator light to show when a device is charging?
- A: Yes, there are indicator lights for each charging function that illuminate when a device is connected and charging.

Documents / Resources

Shinelite Electric FZ084S02 Multi Function Socket [pdf] Instruction Manual
2412, 2BMH8-2412, 2BMH82412, FZ084S02 Multi Function Socket, FZ084S02, Multi Function Socket, Function Socket, Socket

References

User Manual

Shinelite Electric FZ084S02 Multi-Function Socket

Product Information

Product Usage Instructions