ShieldPro Wireless Door Window Sensor
The ShieldPro Door/Window Sensor fits alongside door frames and windowsills.
What comes in the box?
- Sensor x 1
- Magnet x 1
- Wall screws x 4
- Wall anchors x 4
Sensor figures
- Figure 1: Placement for door sensors
- Figure 2: Placement for window sensors
- Figure 3: Grooves for positioning
- Figure 4: Distance between magnet and sensor
Placement tips
- Indoor use only.
- Pair with the panel before mounting your sensor.
- Place on the opening side of doors and windows (see Figure 1 and Figure 2).
- The grooves must face each other (see Figure 3).
- Sensor and magnet must be 0.25 inches apart or less (see Figure 4).
Mount your Door/Window sensor with adhesive
- Step 1 Clean and dry the sensor location.
- Step 2 Remove all battery tabs from the sensor.
- Step 3 Pair with the panel.
Settings (
button) > Devices > + > Door or Window >
Follow the prompts to pair the sensor. - Step 4 Peel the protective backing off the sensor and press firmly against the surface.
Repeat with the magnet.
Questions?
Contact us at 1-800-574-7798 or CST@shieldpro.com
Documents / Resources
 |
ShieldPro Wireless Door Window Sensor [pdf] User Guide Wireless Door Window Sensor, Door Window Sensor, Window Sensor, Sensor |