ShieldPro Solar Panel Sensor
Product Specifications
- Solar Panel provides solar power to wireless outdoor cameras and doorbells
- Includes: Solar panel with 10-foot cable x 1, Mounting bracket x 1, Wall screws x 3, Wall anchors x 3
Product Usage Instructions
Mounting the Solar Panel
- Step 1: Slightly loosen the hinge lock.
- Step 2: Screw the mounting bracket in place using the wall anchors if necessary.
- Step 3: Attach the solar panel to the bracket by twisting it onto the panel mounting screw. Tighten the connection without overtightening.
- Step 4: Adjust the angle of the solar panel and lock it in place by tightening the hinge lock. Avoid overtightening.
- Step 5: Connect the power cable to your camera or wireless doorbell. Ensure a snug connection to prevent water damage.
Frequently Asked Questions (FAQ)
Q: What is included in the box?
A: The box includes one solar panel with a 10-foot cable, one mounting bracket, three wall screws, and three wall anchors.
Q: How do I connect the solar panel to my outdoor camera or doorbell?
A: Connect the power cable from the solar panel to the corresponding connection port on your camera or doorbell. Ensure a secure connection to prevent water damage.
Q: How do I adjust the angle of the solar panel?
A: Loosen the hinge lock, adjust the angle as needed, and then tighten the hinge lock to secure the position. Avoid overtightening to prevent damage.
Q: What should I do if I have further questions or issues?
A: You can contact us at 1-800-574-7798 or email us atCST@shieldpro.com for assistance.
Solar Panel Quick Start Guide
The ShieldPro Solar panel provides solar power to wireless outdoor cameras and doorbells.
What comes in the box?
- Solar panel with 10-foot cable x 1
- Mounting bracket x 1
- Wall screws x 3
- Wall anchors x 3
Solar Panel figures
Figure 1: Mounting bracket parts
Figure 2: Mounting the bracket with screws and optional wall anchors
Figure 3: Connecting to Outdoor Camera
Figure 4: Connecting to Outdoor Camera and Wireless Doorbell
Placement tips
- Place the solar panel in a location that consistently receives sunlight.
- The solar panel is set in place and does not move.
- The bracket’s hinge allows 360° positioning (see Figure 1).
Mount your Solar Panel
- Step 1 Slightly loosen the hinge lock.
- Step 2 Screw the mounting bracket in place using the wall anchors if necessary (see Figure 2).
- Step 3 Attach the solar panel to the bracket by twisting the panel onto the panel mounting screw. Tighten the connection. Do not overtighten.
- Step 4 Adjust the angle of the solar panel and lock it in place by tightening the hinge lock. Do not overtighten.
- Step 5 Connect the power cable (Figure 3) to your camera or wireless doorbell (Figure 4). Make sure the connection is snug to prevent water damage.
Questions?
Contact us at 1-800-574-7798 or CST@shieldpro.com
Documents / Resources
 |
ShieldPro Solar Panel Sensor [pdf] User Guide Solar Panel Sensor, Panel Sensor, Sensor |
