Shenzhen ZP01 Zigbee PIR Motion Sensor User Manual

Create an account with your mobile number and authentication
code.
Connect your mobile to the Wi-Fi router and click “Add Device”.
Ensure your zigbee gateway is ready and powered.

Select “Wireless Gateway (Zigbee)” from Gateway Control, enter
your Wi-Fi name and password.
Follow the instructions to connect the sensor to the gateway
using the reset button.

Using the Zigbee PIR Motion Sensor:

Slide downwards to open the back cover of the battery
compartment and insert 2 AAA Alkaline batteries.
Clean and dry the area where you want to mount the sensor, then
peel off the adhesive tape and press firmly to secure it.

Ensure the indicator is blinking rapidly, if not, press the
reset button with the supplied pin until it blinks.

Features:

Alarm alert: Receive notifications on your mobile when motion
is detected.

Alarm records: View all alarm records in the app.
Low power alarm: Get alerts when battery power is low.

Device sharing: Share sensors with family members for
monitoring.
Smart linkage: Set up scene linkage with other smart devices
like lights.

FAQ:

FCC Statement:

If the motion sensor detects movement, it will alarm with a
30-second interval after movement stops and then resumes.
The sensor may be affected by heat or light sources,
potentially hindering infrared detection.

RF radiation can interrupt the sensor’s functionality,
especially in environments close to human body temperature.

“`

View Fullscreen

Size : 70*50 MM

Zigbee PIR Motion Sensor USER MANUAL

Product Presentation:

Specification

S/S Pin Reset button hole

Size: 71*25*20mm Battery: LR03-1.5V/AAA*2 (Alkaline battery) Standard: Zigbee 3.0 Compliant Zigbee Frequency: IEEE 802.15.4 Standby Current: 15uA Alarm Current: 2mA

How to set up:
1. Use your smartphone to scan QR code, or search “Smart Life” app in Google Play Store or APP Store to download and install.

3. Connect your mobile to the Wi-Fi router, click “Add Device” . Make your zigbee gateway ready, and supply power to the gateway.

Smart Life

QR Code

Detect Angle: 128 Detect distance: 6 Meters

2. Create an account with your mobile number and authentication code.

Model: ZP01

Battery Cover

LED Indicator

-1-

-2-

-3-

4. Select ” Wireless Gateway (Zigbee) ” from ” Gateway Control”, enter wifi name and password.

1) Select” Blink Quickly”, make sure the blue light is on and red light is blinking quickly, if not , hold the reset button about 5s till red indicator is blinking quickly, It will connect automatically.

-4-

-5-

-6-

2) You can also select “Blink Slowly”,make sure the indicator is blinking slowly, if not, hold the reset button for about 5s till indicator is blinking slowly. Connect your mobile to the device’s hotspot: “SmartLife-XXXX” , then click to return to App interface , it will connect to Wi-Fi automatically, configuration completed.

-7-

-8-

How to use:
Slide downwards to open back cover of battery compartment, install 2pcs AAA Alkaline batteries in the right direction of electrode, then push to close the cover.
5. Click “+ Add subdevice” , make sure indicator is blinking rapidly. if not, use the supplied pin to press the reset button till the indicator is blinking. It will search the sensor and add it successfully.
-9-

6. Use a clean and dry cloth to clean the area where you want to mount the sensor. Peel off the adhesive tape, press hard to secure it well.
-10-

Features
1. Alarm alert
When the sensor detects someone is passing by, you will receive alarm message on your mobile.
2. Alarm records
You can check all alarm records in the app, so you will not miss any important moments.
3. Low power alarm
When the battery power is low, the app will alert you to replace with new batteries.
4. Device sharing
Share your added sensors with family members, so they can also monitor the status on their App.
5. Smart linkage
You can set scene linkage with other tuya smart devices such as light. When it detects body movement, the lights turn on automatically.
-11-

FAQ FCC Statement

1. If you use the motion sensor the first time, it will alarm when the sensor detects body movement. And there will be about 30s time interval to alarm after you leave the detect angle or detect range, then pass by again.
2. The motion sensor is vulnerable to interrupt by heat or light sources, the infrared radiation of human body is easy to be sheltered due to poor penetration, so the detector is hard to receive the infrared.
3. The motion sensor is vulnerable to interrupt by RF radiation. When environment temperature is close to human body temperature, the detect sensitivity will decrease obviously, making sensor short-term failure sometimes.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.these limits are designed to provide reasonable protec tion against harmful interference in a residential installation. This equipment generates,uses and can radiate radio frequency energy and , if not installed and used in acordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,

-12-

-13-

The user is encouraged to try to correct This equipment complies with Part 15 of

the interference by one or more of the the FCC Rules. Operation is subject to

following measures:

the following two conditions:

-Reorient or relocate the receiving

(1) This device may not cause harmful

antenna.

interference ,and

-Increase the separation between the (2) This device must accept any

equipment and receiver.

interference received, including

-Connect the equipment into an outlet interference that may cause undesired

on a circuit different from that to which operation.

the receiver is connected.

-Consult the dealer or an experienced

radio/TV technician for help.

FCC Radiation Exposure Statement:

To assure continued compliance, any The equipment complies with FCC

changes or modificationsnot expressly Radiation exposure limits set forth for

approved by the party.

uncontrolled environment. This equipm

Responsible for compliance could void -ent should be installed and operated

the uer’s authority to operate this

with mininum distance 20cm between

equipment.(Example-use only shielded the radiator and your body.

interface cables

-14-

-15-

Documents / Resources

Shenzhen ZP01 Zigbee PIR Motion Sensor [pdf] User Manual
2A8TU-ZP01, 2A8TUZP01, ZP01 Zigbee PIR Motion Sensor, ZP01, Zigbee PIR Motion Sensor, PIR Motion Sensor, Motion Sensor, Sensor

References

User Manual

Shenzhen ZP01 Zigbee PIR Motion Sensor User Manual

ZP01 Zigbee PIR Motion Sensor

Specifications:

Product Usage Instructions:

Setting Up the Zigbee PIR Motion Sensor: