YB-V300W2-5 Smart Pet Feeder with Camera
“
Specifications:
- Product List:
- Food Tank
- Food Bowl
- User Manual
- Food Bowl Holder
- Desiccant Pack
- Main Unit
- Adapter
Product Overview:
The product consists of various components including the main
unit, food bowl, food tank, desiccant pack, and adapter. It
features panel buttons, indication lights, a Type-C port, backup
battery compartment, microphone, TF card slot, adjustable camera,
and more.
Product Installation:
3.1 Assemble the Main Unit:
Follow the user manual instructions to correctly assemble the
main unit with all its components.
3.2 Install the Desiccant:
Place the desiccant in the designated desiccant box within the
product.
Product Use:
4.1 Adding Pet Food:
Open the food tank and add the desired pet food to the
container.
Smart Control:
5.1 Download and Install the App:
Download the Tuya Smart app from the app store to control and
monitor the product remotely.
5.2 Adding Device:
Follow the steps provided in the user manual to add the device
to your network using Wi-Fi or Bluetooth connectivity.
FAQ:
Q: Do I need to purchase batteries separately for the
product?
A: Yes, batteries are not included with the product and need to
be purchased separately. Only alkaline batteries can be used.
Q: How do I know when to replace the batteries?
A: Replace the batteries promptly when the power is low. It is
recommended to check and replace the batteries during holidays or
when needed.
“`
01 Product List
Please confirm the accessories before installation and use. (Batteries and screwdrivers are not included and need to be purchased separately)
Food Tank
Food Bowl
User Manual
Food Bowl Holder
Desiccant Pack
Main Unit
Adapter
Note: To provide better products, we will periodically make improvements. The product images may slightly differ from the actual product. Please refer to the actual product.
02 Product Overview
Panel Buttons Indication Lights
Food Bowl Food Bowl Holder
Type-C Port Backup Battery Compartment Bottom View of Main Unit
Top Cover Food Tank Microphone TF Card Slot Adjustable Camera Main Unit
Desiccant Box
Desiccant Box
03 Product Installation
3.1 Assemble the Main Unit
æ Before installation, please take out the food bowl, food bowl holder and adapter first. ç Place the food bowl holder on a flat table or floor and then place the food bowl inside it. è Pick up the main unit, align it with the food bowl holder, and place it vertically down. é Pick up the food tank, align it with the main unit, and place it vertically down.
3.2 Install the Desiccant
æ Hold the machine, press the movable part of the upper cover buckle, and lift the upper cover upward and take it out.
ç Open the desiccant box, take out the desiccant packet, spread it evenly inside, and then close the desiccant box.
04 Product Use
4.1 Adding Pet Food
æ Open the top cover and add the appropriate amount of pet food.
ç Then close the top cover.
05 Smart Control
5.1 Download and Install the App: Download “Tuya Smart” from the app store
Press here
3.3 Install the Backup Battery
æ Remove the power cover, insert three size C batteries into the battery compartment.
ç Pay attention to the polarity during installation and finally close the power cover.
3.4 Connect the Power
Take out the power adapter and insert one end into the Type-C port at the bottom of the main unit.
Whether to install the batteries or not depends on individual needs. (Please purchase batteries separately. Only alkaline batteries can be used.)
Note: Replace the batteries promptly when the power is low. Check and replace the batteries during holidays.
4.2 Indicator Lights and Buttons Instructions
Indicator Lights Description:
Connecting the power will turn on a green light. When the battery is low, the yellow light will flash. When connecting to the network, the green light will flash rapidly. Once the connection is successful, the green light will remain on.
The blue light will be on during playback and food dispensing. It will flash quickly if the grain is stuck.
When recording, the red light will turn on. When the power is turned on, the red light will flash briefly.
Working Indicator Food Dispensing/Food Recording Indicator
Light
Blockage Indicator Light
Light
Reset Key
Manual Grain Dispensing Button
Record Button
Buttons Description: Long press for 3-5 seconds, the device will reset.
Short press for manual feeding, long press for initialization settings. Long press to start recording, release to end recording. Supports 15 seconds of recording, double press to delete the recording.
When turning on the power, the red light flashes, then the green light stays on. After 20 seconds, an alarm sounds. In 10 seconds, there will be a notification waiting for WiFi connection, then a power indicator light starts flashing slowly.
Scan the QR code to download and install the AJCloud App to use more functions.
5.2 Adding Device METHOD 1: Configure Wi-Fi via Bluetooth as Optimal Recommendation (Some Models Do Not Support)
1. Enter the app’s main interface and select to add a device.
2. During device search, ensure that Bluetooth on your phone is turned on and the device is in networking configuration mode.
3. Select the device and start pairing.
4. Choose a wireless network and enter the password. (Supports 2.4GHz wireless networks)
5. Please wait for the device to be added.
6. The device has been successfully 7. After entering the main interface,
added. Click Finish to enter the
click on the product to access the
main interface.
operation interface.
METHOD 2: Configure Wi-Fi via QR Code
1. Enter the app’s main interface and select to add a device.
2. Select small appliances, then choose the Pet Feeder Camera (2.4GHz & 5GHz).
3. Confirm the working indicator light is flashing, or you hear a prompt tone, then click to proceed to the next step.
4. Choose a wireless network and enter the password. (Supports 2.4GHz wireless networks)
1. Blockage Indicator Light
1. Blockage Indicator Light
7. The device has been successfully 8. After entering the main interface,
added. Click Finish to enter the
click on the product to access the
main interface.
operation interface.
METHOD 2: Configure Wi-Fi via Wi-Fi Hotspot
1. Enter the app’s main interface 2. Select small appliances, then
and select to add a device.
choose the Pet Feeder (Wi-Fi).
3. Choose a wireless network and 4. As required, verify that the indicator
enter the password.
light is blinking, and then click to
(Supports 2.4GHz wireless networks) proceed to the next step.
5.3 Operation Interface Description
5. Select slow flash or fast flash based on the status of the device indicator light.
6. Please wait for the device to be added.
7. The device has been successfully 8. After entering the main interface,
added. Click Finish to enter the
click on the product to access the
main interface.
operation interface.
Back to the homepage
pet feeder
Video replay Review and save images
Select theme color
Turn on or off the camera
Select or switch camera mode:
Night Vision Mode
Smart Mode
Infrared Mode
Color Mode
Select or disable anti-flicker Setting the current volume Turning on or off motion detection Turning on or off the laser light Function button management
Live view
Playback
Gallery
Theme Color Private Mode
Night Mode
Anti-Flicker Device Volume
Motion Detection
Light
Edit
Playback Direction
Feed
Service Hall Features
Full screen display Save current view as an image Voice call Screen recording Show or fold function bar
View current or history messages Control the camera to pan up and down Remote feeding or set feeding schedule Experience more services Display function list
Operation Interface Display
You can set a feeding schedule through this App, and the device will dispense food according to the set schedule with fixed times and amounts each day. You can check the dispensing and eating status in time through this App. You can view the live camera, interact with your pets in real-time voice, share and playback videos. Real time grain shortage detection, and when the surplus grain is insufficient, push the grain shortage information through the App
The camera with laser lamp allows you to tease your pet remotely through this App, bringing you and your pet more fun.
06 Cleaning and Maintenance
æ Open the top cover and take out the desiccant pack, then remove the food bowl and food bowl holder. ç Remove the food tank, separating it from the main unit. è Add the appropriate amount of detergent to clean the food tank, main unit, top cover, food bowl, and food bowl holder and rinse. é Dry and reassemble them.
When cleaning the food tank interior and rotor, use a sponge or a soft cloth, and avoid using hard cleaning tools to prevent scratching the plastic parts, which may affect the normal operation of the sensors. The main unit should not be exposed to water or soaked, but can be wiped with a damp paper towel.
Desiccant Pack
By pressing on the side active area to install or remove the desiccant box
Press on the movable part of the snap fit to make it
easier to remove the grain storage bucket.
Rear view of the Main Unit
Product Name
Product Size Input Rated Power Connection Method Power Supply Parameters Suitable Food Product Material Product Weight Food Storage Capacity Applicable Range Video Resolution Teasing Method Camera Rotation
Specifications
Smart Pet Feeder (with Camera )
195x195x325 mm 5V 2A 10W Wi-Fi via Bluetooth/ QR Code/ Hotspot 5V external power + 3x size C batteries Recommended to use 5-16mm dry non-sticky pet food PC + Stainless steel Based on actual product weight 5L Cats and small dogs 1920*1080 Laser Up and Down
Notice to Users
Before using, please read this manual carefully. Once installed and in use, it means you have read and accepted the following safety instructions.
The company will not be held responsible for any damage caused by abnormal or improper use. The final interpretation belongs to our company.
Q&A Troubleshooting
Q: Will data be lost after network or power disconnection? A: The built-in battery allows continuous recording without loss. When working with batteries, it will continue to work
for a period of time (dual power supply is recommended). Q: Why can not the main unit be rinsed? A: Because the main unit is equipped with precise electronic components and circuit boards. For easy cleanup, just
wipe the outside of the main unit with a wet rag after powering off.
Safety Instructions
*Failure to comply with the following terms may result in improper operation or other unexpected issues.
Please strictly follow the manual for installation and use of the device. Do not forcibly disassemble the device. Do not scratch or abrade the camera with sharp objects. Use indoors only. Do not place it where it can be exposed to direct sunlight, as it may affect the device’s functions. Keep it away from fire sources. The device is powered by low voltage, but if a pet bites on the power cord it can still potentially cause electric leaks. Please use it correctly according to the user manual. Use the original power adapter to avoid device damage and safety hazards. Keep the device flat. Do not overturn it as it may malfunction. Do not feed anything other than pet food through the feeder, as it may cause the device to malfunction and even safety issues for your pet. Do not immerse the device in water or use in wet. To prevent pets from tipping over with the product, please place the feeder out of their reach. Do not place this device at a high location to prevent it falling as it may cause damage or pose a safety risk to pets. Dry and put the food tank back after cleaning to use it again. Do not use the device if there is water on the power cord or plug. Unplug the power cord before installing and disassembling. Remove the battery and unplug the power cord, then store the device after washing and drying if stop using it. Ensure children using under adult guidance. Only qualified personnel should repair the device to avoid any accidents. Use the same rating when an extension cord is needed. If not used for three months, please check the battery capacity (this product uses alkaline batteries only). Please carefully follow the manual and the operations listed above.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
RF Exposure Statement To maintain compliance with FCC’S RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm between the radiator and your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.
User Manual
Smart Pet Feeder with Camera
Please read this manual carefully before using the product and keep it for future reference.
Documents / Resources
 |
Shenzhen YB-V300W2-5 Smart Pet Feeder with Camera [pdf] User Manual 2BKCP-YB-V300W2-5, 2BKCPYBV300W25, yb v300w2 5, YB-V300W2-5 Smart Pet Feeder with Camera, YB-V300W2-5, Smart Pet Feeder with Camera, Pet Feeder with Camera, Feeder with Camera, Camera, Feeder |