Shenzhen WP103 Android Tablet PC

Introduction
Technical characteristics
- Display: 10.1″ Capacitive Touchscreen – HD Resolution 1280 x 800
- CPU: MT8768 – 4 x Arm Cortex- A53 @ 2.0 GHz + 4 x Arm Cortex- A53 @ 1.5 GHz
- Operating System: Android™ 14 – Memory: 4 GB RAM – 64 GB ROM
- Wi- Fi: 802.11 ac/a/b/g/n 2.4GHz/5G
- Display Orientation: Landscape or Portrait mode
- Power Supply: Connector RJ45 PoE 48 V – 53 V / Connector RJ12 12 V – 16 V / USB Type- C
- Audio: Dual speakers – Microphone
- Wall Mounting: Compatible with DIN 503 or 60 mm round wall boxes; adaptable to both landscape and portrait orientation via a metal bracket
- Dimensions (W x H x D): 243 x 152 x 34 mm (thickness after installation: 10 mm) – Weight: 548 g
| Product name | Tablet PC |
| Model number(Main Test Model) |
WP103 |
| Applicant Organization: |
Shenzhen Pretech Industrial Co., Ltd |
| Register Address: |
808, 8F, Qiancheng Commercial center, 5 Haicheng Road, Bao’an District, Shenzhen, China |
| Manufacturer name | Shenzhen Pretech Industrial Co., Ltd |
| Manufacturer address | 808, 8F, Qiancheng Commercial center, 5 Haicheng Road, Bao’an District, Shenzhen, China |
Announcements
Preventive maintenance
- Please always keep the device dry. To avoid the device short trouble, corrosion fault and electric short, please prevent the device, charger from water and moisture, and don’t operate the device or charger by wet hand.
- To avoid failure of device, charger, please prevent the device, charger from violent shock or shake.
- To avoid failure of device, charger, please prevent the device, charger of all over heating or too cold circumstance
- Never shock, throw, prod the device, or drop, extrude, bend the device.
- Never disassemble the device and accessories arbitrarily, otherwise the device and accessories are not in our company warranty scope.
Safety Instruction
Before the operation of the device, please read this chapter and teach your kids about these information. For further details, please refer to the safety instructions and announcement.
- Never use the device when driving car, in order to ensure safe driving.
- In the medical area, please abide by related rules and regulations. Please shut down the device when it is near to the medical area.
- To avoid the wireless signal to interrupt the plane- controlled signal, please shut down the device or using airplane mode when you are boarding a flight,
- To avoid electronic equipment failure, please shut down the device in the vicinage of high-accuracy electronic equipments.
- Please don’t disassemble the device and accessories. Only authorized agent has access to service the device.
- Please keep the device far away from magnetic equipments, the radiation of device may erase the data stored in the magnetic equipments.
- Never use the device in the vicinage of high temperature, inflammable gas ( gas station).
- Protect the device and accessories from kids reach scope, and avoid the kids to use the device without parents’ supervision.
- Please comply with related rules and regulations, and respect others’ privacy and legal rights while using the device.
- Please strictly adhere to related instructions in the manual when using USB cable to ensure the safety of the device or PC.
- Never use the device in bathroom or other humid environment, and please protect the device from liquid wash or wet.
Quick Start Guide
Keys Function
Keys Function Description:
| Power button | Short press to sleep/wake up, long press to startup and
shutdown. |
| Volume +(up) | increase the volume |
| Volume -(down) | decrease the volume |
| HOME button ( home )
|
Click it in any interface will return to main interface. |
|
Back button(back) |
click it in any interface will return to previous menu |
| Menu button |
This button will display in menu interface. |
| Setting button |
Swipe up to show recently used apps; you can switch
between the last two applications |
Startup and Shutdown
No battery. Startup by power supply connection. Shutdown by disconnecting power.
Usage of Touch Screen
Device operating methods
- There are below methods to view the main screen, menu and application procedure in your device. Click
- When you want to use the screen keyboard typing or choose application in the main interface, you only need to touch it by your finger.
- Press on
- If you want to open some item(textbox or the link in the webpage), or shortcut and main procedure move, you can press on this item.
Quickly slide or slide indicates
Quickly slide or slide indicates make quick vertical or horizon movement by finger.
Pull
Before you pull, you need to hold the it with strength until you pull it into the position you want.
Rotate
For most pictures, you only need to rotate the device sidewise to change the screen direction from horizon to vertical. For instance, when you are typing words, and watching movies.
Home Page
Main interface as below picture 2.4-1, long press the blank and it will popup windows to set wallpaper, folder, widgets, and shortcut.
The extended home page
The home page can be extended beyond the wideness of screen to provide more space, which you can put new-added shortcuts and widgets. Click the blank space in home page then slide right or left to extend to the right or left of the screen. In the home page, there are two extended pictures, as Picture 3.5-2.
The shortcut icons management in desktop application.
Create folder icon in desktop
- Drag the icons need to be put together on one icon(can also overlay several icons)as Picture 3.5-3.

- Then click the overlaid icons, the applications can be folded, as Picture 3.5-4.Click the unnamed folder in the black box, it will popup the hidden keyboard, the folder name can be renamed (this is similar with Apple IOS system), the icons position can be changed through long press.

- Long press to enter the home screen settings, as Picture 3.5-5. you can turn on the notification dots feature , A small circle will appear in the corner of the app icon to let users know which specific apps have new messages, and the long-pressed app will bring up a preview window for viewing messages.The circle’s color also changes as the icon’s color changes , such as On lock srceen、 Allow notification dots、Default notification sound、Do Not Disturb , Figure 3.5-6 shows the display of notification dots after it is started.


Remove the icons in desktop
- Long press the icons need to be remove, then on the right above of the screen, it will appear
icons. - Drag the icon to the above of the remove icon, till the icon become red, then move your finger to delete the icon.
Change the wallpaper of desktop
- In home page, long press any blank space in main screen, it will popup a window to change the wallpaper.
- Click the gallery or wallpaper gallery to select the wallpaper.
Typing words
Use the screen keyboard
When you start the procedure or choose the words or numbers edition, it will show the screen keyboard. The keyboard contains below typing options:
Android keyboard
Choose the typing method you want
- Click Setting procedure application.
- Click Language and Keyboard.
- In the text setting area will reveal all the installed words-typing methods in yourdevice.
- Tick the typing method you want.
Use and switch of input method
| 1 | switch the capital and small letter |
| 2 | switch the mode of words input |
| 3 | click to insert the space |
| 4 | click input to execute |
| 5 | delete the character in the left of cursor, click and hold to delete all the characters in the left on the cursor. |
Basic Setting
Connect Wi-Fi
- In the main menu or interface, choose setting application procedure.
- Click WLAN, open wifi, device will automatically search the available Wifi wireless internet. As Picture 4.1-3
- Choose the Wi-Fi internet you want to connect, if it has password, it will popup the password window, enter password, click connect.

Add Network
- Click
icon in right top, as Picture 4.1-4
- Input network SSID, the wireless network name, click save.
- Click user name already saved, click connect to use network, as Picture 4.1-5

Network Notice
If you open Network Notice, when WIFI signal appears, the right bottom will remind you available WLAN network.
Check WIFI data usage
Slide on the data usage page to find “Wi-Fi data usage” and click it, as Picture 4.1-8
Bluetooth
Bluetooth function operation
- Click setting application in main menu interface
- Click Bluetooth and open it.
- If somebody open Bluetooth in your surroundings, click search device in right above, then device will automatically search the Bluetooth device nearby.
- Click the available Bluetooth device, it will popup request window, enter into related password, and match the device to connect.
- After a successful match, choose the operation you want to, click
to enter into
Bluetooth setting
Rename tablet
Click Connected devices-Pair new device-Device name as in Picture 4.2-3, select Rename tablet, you can rename it as you want
Display
- Night Light Mode
- Click Setting application procedure.
- Click display, choose Night Light Mode,
Click the “Turn on Now” button and it will go into night mode and the blacklight turns red.
Security&location
Set locked screen
Lock the touch screen by unlock icon or password to protect your device.
Note: After setting screen locked, you should enter the pass code each time when you startup or screen is locked
Set unlocked picture
- Click setting application in main interface.
- Click security.
- Click screen lock.
- Choose pattern in text setting area.
- Click next following the remind message.
- The unlocked pattern board pop up, there are nine touch spots, connect 4 points from vertical, horizontal or diagonal direction. As Picture 4.8-1, move your finger from the screen when finish. The system will record yours new unlock pattern.
- Click continue.
- When you see the reminder, enter the unlock pattern, then click confirm.
Set unlock PIN code
- Click setting application in main interface.
- Click security.
- Click screen lock.
- Choose PIN in text setting area.
- Enter new PIN code(numbers) and click continue.
- Enter new PIN code again and click confirm.
Set unlock password
- Click setting application in main interface.
- Click safe.
- Click screen locked.
- Set password in text setting area.
- Set new password(letters and numbers) and then click continue.
- Enter the password again and the click confirm.
Installation of Procedures
Installation
Install the third party application procedure
- Click “file manager” application procedure; choose the application procedure you need to install.
- Hold the application procedure you need to install.
- It popup install, click install apk.
- Finish the installation as guide, it will operate.
Note: The third party procedure searched from internet to use on the system are all suffixed with .apk.
Uninstall
Uninstall application procedure
- Click setting icon in main interface.
- Click apps, list all the application procedures installed in the system.
- Click the APK you want to uninstall, click uninstall.
- Click confirm to finish uninstallation.
Skill: The procedure manager installed by system has many convenient methods to uninstall after opening procedure manager, click uninstall, it will list all the application procedures installed by system.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modi fi cations to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
Documents / Resources
![]() | WP103 Android Tablet PC |
References
- User Manualmanual.tools

