Shenzhen V960 Camera User Manual

Shenzhen V960 Camera

Arsalan post complete

Shenzhen V960 Camera

A: Device Description

Device Description

B: How to work?

Step 1: Install ‘ v960’ app . Two ways to download APP

  1. scan the QR code.
    QR code.
  2. download the “V960” application in the APP Store (iphone) or google play (android phone)

Step 2: power on device

  1. Connect to 5V power supply, the blue LED lights up
  2. Press and hold the reset button for 3 seconds until The blue LED flashes.
    How to work?

Step 3:Add device

  1. open the “V960” APP
  2. Click “Add New Device”.
    How to work?

Step 4: Set device name & connect wifi

  1. Named your device,for example : living room,dining room.
  2. select wifi and enter password.
    How to work?
  3. press ”connect” button and the device will connect to the network automatically.
  4. At this point, the device can work normally.

C: Attention

  1. This device should be kept away from fire, water sources and other dangerous sources.
  2. To better use this device, please avoid the front and side of the lens close to the glass, white wall and other reflective objects, in order to avoid the picture is bright near and dark in.
  3. Please ensure that this product is installed within the range of Wi-Fi signal coverage.
  4. please note that this device only supports 2.4G WiFi signals, not 5G WiFi signals.
  5. This device only supports FAT32 format memory cards, and may not recognize memory cards with other formats.

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Statement

To maintain compliance with FCC’s RF Exposure guidelines,This equipment should be installed and operated with minimum distance of 20cm the radiator your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.

Logo

Documents / Resources

PDF thumbnailV960 Camera
User Manual · K8, 2BEIB-K8, 2BEIBK8, V960 Camera, V960, Camera

References

Questions and answers

Helpful product questions tied to this manual. Each item links to the full Q&A page.

Browse all questions about this manual

Questions & Answers

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

  1. V960 camera
    I’m struggling to get my device working. Get server network failure error

    Inge arendse asks V960 camera
    I'm struggling to get my device working. Get server network failure error
    Manuals+ clarified question
    Question

    How do I fix a server network failure error on my V960 camera?

    Answer

    A 'server network failure' error typically indicates a problem with the connection between the camera, your router, and the app's cloud server. Based on the V960 Camera User Manual, please follow these troubleshooting steps:

    • Check WiFi Frequency: Ensure you are connecting to a 2.4GHz WiFi network. The manual explicitly states that this device does not support 5G WiFi signals.
    • Verify Signal Strength: Ensure the camera is installed within the range of your Wi-Fi signal coverage. If the signal is weak, the connection to the server may fail.
    • Reset the Device: Perform a hard reset by pressing and holding the reset button for 3 seconds until the blue LED flashes. This clears previous connection attempts and allows you to start the setup process fresh.
    • App Permissions: Ensure the 'V960' app has all necessary permissions on your smartphone (Location, Local Network, and Data) to communicate with the device and the server.
    • Power Supply: Confirm the device is connected to a stable 5V power supply as indicated in Step 2 of the manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.