SC001 Wireless Remote Control
“
Product Specifications:
- Product: Wireless Remote Control
- Compliance: Part 15 of the FCC Rules, licence-exempt
transmitter(s)/receiver(s) compliant with Innovation, Science and
Economic Development Canada’s licence-exempt RSS(s) - Conditions: Must not cause harmful interference and must accept
any received interference
Product Usage Instructions:
- Power On/Off:
- To power on, press the ‘on’ button.
- To shut down, press the ‘off’ button.
- Adjustment:
- To increase, press the ‘+’ button.
- To reduce, press the ‘-‘ button.
Frequently Asked Questions (FAQ):
Q: What should I do if the remote control is not
responding?
A: If the remote control is not responding, try replacing the
batteries. Ensure that there are no obstructions between the remote
and the device you are trying to control.
Q: How far is the range of the wireless remote control?
A: The range of the wireless remote control can vary depending
on environmental factors, but typically it can work within a range
of X meters.
“`
Wireless Remote Control User Manual
1product drawing
2Usage 1Press on to power on 1Press off to shut down 2press”+”increase 3press”-“reduce
3Warning message This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures: –Reorient or relocate the receiving antenna. –Increase the separation between the device and receiver. –Connect the device into an outlet on a circuit different from that to which the receiver is connected. –Consult the dealer or an experienced radio/TV technician for help
This device complies with Part 15 of the FCC Rules and contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
Cet appareil contient des émetteurs / récepteurs exemptés de licence conformes aux RSS (RSS) d’Innovation, Sciences et Développement économique Canada. Le fonctionnement est soumis aux deux conditions suivantes : (1) Cet appareil ne doit pas causer d’interférences. (2) Cet appareil doit accepter toutes les interférences, y compris celles susceptibles de provoquer un fonctionnement indésirable de l’appareil
Documents / Resources
 |
ShenZhen SC001 Wireless Remote Control [pdf] User Manual 2BRLI-SC001, 2BRLISC001, SC001, SC001 Wireless Remote Control, SC001, SC001 Remote Control, Wireless Remote Control, Remote Control |