Shenzhen PB08 Smart Global Locator User Guide

Power On / Off: Press the AZOK stamp function
button once to turn on. It should beep once indicating it is
powered on. To power off, hold the same button for at least 3
seconds. You will hear 2 beeps indicating the AZOK stamp is powered
off.
Check For Updates: To use the Apple Find My
app or the Find Items app on Apple Watch to locate AZOK stamp, make
sure you have the latest version of ioOS, iPadoS, watchOs, or
macOS.

Add Your Azok Stamp

Start the App: Open Find My app on your
supported iPhone or iPad. Allow notifications from the app.
Connect AZOK Stamp:
1. Power on the Azok stamp.
2. Tap + then Add Other item.
3. Once the Azok stamp is located, tap Connect.
4. Choose a recognizable name and emoji for your Azok stamp and
  tap Continue.
5. Find My will ask for confirmation to add your Azok stamp to
  your Apple ID – tap Continue. Tap Finish and your Azok stamp will
  be set up.

Locate Your Item

Find Azok Stamp When Nearby:
1. Open Find My app and select the Items tab or open the Find
  Items app on your Apple Watch.
2. Tap on your Azok stamp from the list.
3. Tap Play Sound to make your Azok stamp beep.
4. Tap Stop Sound to stop the beeps once you find it.

Find Item Locator’s Last Known Location:
1. Open Find My app and select the Items tab or open the Find
  Items app on your Apple Watch.
2. Tap on your Azok stamp from the list.
3. Your Azok stamp’s last known location will appear on the
  map.
4. To navigate to that last known location, tap Directions to open
  the Maps app.

Find Azok Stamp When Out of Range

Enabling Notify When Left Behind:
1. Open Find My app and select the Items tab or open the Find
  Items app on your Apple Watch.
2. Tap on your Azok stamp from the list.
3. Under Notifications, enable the Notify When Left Behind
  toggle.
4. You will receive a notification when you leave your Azok stamp
  behind and it’s no longer in range of your device.

Enabling Notify When Found:
1. Under Notifications, enable the Notify When Found toggle.
2. When your Azok stamp is seen by another Find My enabled device,
  you will receive a notification of its updated location.
3. Note: Notify When Found can only be activated when your Azok
  stamp is out of range.

When Your Item is Lost

Enabling Lost Mode:
1. Open Find My app and select the Items tab or open the Find
  Items app on your Apple Watch.
2. Tap on your Azok stamp from the list.
3. Under Lost Mode, tap Enable.
4. A screen detailing Lost Mode will pop up, tap Continue.
5. Enter your phone number or email address and tap Next.
6. You may enter a message that will be shared with the person
  that finds your Azok stamp.
7. Tap Activate to enable Lost Mode.
8. Note: When Lost Mode is enabled, Notify When Found is
  automatically enabled. Your Azok stamp is locked and cannot be
  paired to a new device when Lost Mode is enabled.

Resetting Your Item Locator

Remove the Azok Stamp from Find My App:
Open Find My app and select the Items tab. Tap on your Azok
stamp from the list. Please ensure Lost Mode is disabled. Scroll to
the bottom of the screen and tap Remove Item. A summary will open,
tap Remove to confirm.

Factory Reset Your Item Locator:

After successfully removing Azok stamp from “` “ Find My
app “` “ and select “` “ the Items tab. “` “
Please Note: The remaining steps for Factory Reset Your Item
Locator were not provided in the text excerpt. For complete
instructions, please refer to the user manual. “` “

Frequently Asked Questions (FAQ)

Q: How do I change the name and emoji of my Azok stamp?

A: To change the name and emoji of your Azok stamp, follow these
steps:

In the Find My app, select your Azok stamp from the list.
Tap on Edit Name and Photo.
You can now edit the name and choose an emoji for your Azok
stamp.

Tap Done to save your changes.

Q: Can I use multiple Azok stamps with one device?

A: Yes, you can connect and manage multiple Azok stamps with one
device using the Find My app. Simply add each Azok stamp following
the steps mentioned in the user manual.

Q: How do I know if my Azok stamp is out of range?

A: If your Azok stamp goes out of range, you will receive a
notification on your device indicating that it has been left
behind. Make sure to enable Notify When Left Behind in the Find My
app settings to receive these notifications.

Q: What should I do if I lose my Azok stamp?

A: If you lose your Azok stamp, immediately enable Lost Mode
using the Find My app. This will lock your Azok stamp, show its
last known location, and allow you to display a message for anyone
who finds it. Remember to deactivate Lost Mode once you have
retrieved your Azok stamp.

“`

View Fullscreen

70x90mm

Smart Global Locator
PB08 Azok stamp
Quick Start Guide

Getting Started
1 power On / Off: Press AZOK stamp function button once to turn on – it should beep once indicating it is powered onTo power off: hold the same button for at least 3 seconds. You will hear 2 beeps indicating AZOK stamp is powered off
2.Check For Updates: To use the Apple Find My app or the Find Items app on Apple Watch to locate AZOK stamp, the latest version of ioOS, iPadoS, watchOs or macOs is recommended

Add Your azok stamp
1.Start the App . Open Find My app on your supported iPhone
or iPad. . Allow notifications from the app
2.Connect AZOK stamp . Power on azok stamp . Tap “+ ” then “Add Other tem” . Once azok stamp is located, tap “Connect” . Choose a recognizable name and emoji for
your azok stamp and tap”Continue” . Find My will ask for confirmation to add your
azok stamp your Apple ID – tap “Continue” Tap “Finish” and your azok stamp will be set up

Locate Your item
1.Find AZOK stamp when it is Nearby . Open Find My app and select the “ltems” tab or
Open the Find ltems app on your Apple Watch . Tap on your azok stamp from the list . Tap”Play Sound” to make your azok stamp beep . Tap “Stop Sound” to stop the beeps once you find it
2.Find Item Locators Last Known Location . Open Find My app and select the “ltems”” tab or
Open the Find ltems app on your Apple Watch . Tap on your azok stamp from the list . Your azok stamp last known location will appear
on the map . To navigate to that last known location, tap
“Directions” to open the Maps app

Find AZOK stamp When Out of Range
1 Enabling “Notify When Left Behind” . Open Find My app and select the “ltems” tab or
open the Find Items app on your Apple Watch . Tap on your azok stamp from the list . Under “Notifications”`enable the “Notify When
Left Behind “toggle . You will receive a “notifications” when you leave
your azok stamp behind and it’s no longer in Range of your device.
2.Enabling “Notify When Found” . Under “Notifications” enable the “Notify When
Found” toggle . When your azok stamp is seen by another Find
My enabled device, you will receive a notification of its updated location . Note: “Notify When Found”can only be activated when your azok stamp is out of range

When Your item is Lost
1.Enabling “Lost Mode” . Open Find My app and select the “ltems” tab or
open the Find ltems app on your Apple Watch . Tap on your azok stamp from the list . Under “Lost Mode” tap”Enable” . A screen detailing Lost Mode will pop up, tap
“Continue” . Enter your phone number or email address and
tap”Next” . You may enter a message that will be shared
with the person that finds your azok stamp . Tap “Activate” to enable “Lost Mode” . Note: When “Lost Mode” is enabled,`”Notify
When Found” is automatically enabled “Note: When “Lost Mode” is enabled, your azok stamp is locked and cannot be paired to a new device

Resetting Your item Locator
1 Remove the azok stamp from Find My app . Open Find My app and select the “ltems” tab . Tap on your azok stamp from the list . Please ensure “Lost Mode” is disabled . Scroll to the bottom of the screen and tap
“Remove ltem” . A summary will open, tap “Remove” to confirm
2. Factory Reset Your Item Locator: . After successfully removing azok stamp from
Find My app,press your azok stamp function button four times rapidly then hold it a fifth time until you hear a ringing chime. . the azok stamp is now reset and ready to be paired to a new device

But Wait…There’s More
1 Replace the Battery: . Replace the battery with a new CR2032 battery
2Unwanted Tracking Detection: If any Find My network accessory separated from its owner is seen moving with you overtime, you’ll be notified in one of two ways: (1) If you have an iPhone,iPad, or iPod touch, Find My will send a notification to your Apple device. This feature is available on iOS or iPadOSs 14.5 or later. (2) If you don’t have an iOS device or smartphone, a Find My network accessory that isn’t with its owner for a period of time will emit a sound when its moved. These features were createdspecifically to discourage people from trying to track you without your knowledge.

The Fine Print
Use of the Works with Apple badge means that product has been designed to work specifically with the technology identified in the badge and has been certified by the product manufacturer to meet Apple Find My network product specifications and requirements. Apple is not responsible for the operation of this device or use of this product or its compliance with safetyand regulatory standards.
@ Apple, Apple Watch, watchOS, iPad, iPadOS, iPod touch, Mac, and macoOs are trademarks of Apple Inc.,registered in the U.S. and other countries. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.

FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction

Documents / Resources

Shenzhen PB08 Smart Global Locator [pdf] User Guide
2BLCN-PB08, 2BLCNPB08, PB08 Smart Global Locator, PB08, Smart Global Locator, Global Locator, Locator

References

User Manual

Shenzhen PB08 Smart Global Locator User Guide

PB08 Smart Global Locator

Product Information

Specifications

Product Usage Instructions

Getting Started