AK-A101 Remote Control Switches, Alarm Systems
Specifications:
- Working voltage: DC9V
- Working frequency: 434.0125MHz
- Standby current: 0MA
- Working current: > 80MA
- Encoding Type: Fixed code (2264) and learning code
(EV1527) - Transmission distance: > 30 m (open area sensitivity more
than 103 dBm) - Output power: 30 m (0 DBM)
- Transfer rate: < 10 KBPS
- Modulation mode: ASK (amplitude modulation)
- Working temperature: -10°C to +70°C
- Size: 136 * 42.2 * 25 mm
Product Usage Instructions:
1. Power Switch and Energy Saving:
1.1. This device comes with a power switch that allows you to
turn off the remote control when not in use to save
electricity.
2. Areas of Application:
2.1. This product is suitable for various applications including
remote control switches, alarm systems, remote control door locks,
remote control electric shutter doors and windows, water pump
control, and industrial control products.
3. Operating the Remote Control:
3.1. Ensure the device is powered with a DC9V power source.
3.2. Follow the specific instructions provided with the
equipment you are controlling using the remote.
3.3. Keep the transmission distance within the specified range
for optimal performance.
4. Safety Precautions:
4.1. Do not make any changes or modifications to the device that
are not approved by the manufacturer as it may void your
warranty.
4.2. The device complies with FCC rules and should be operated
with a minimum distance of 0cm between the radiator and your body
to adhere to radiation exposure limits.
FAQ:
Q: What should I do if the remote control is not working?
A: Check the power source of the device, ensure the transmission
distance is within range, and try replacing the battery in the
remote control.
Q: Can I use this remote control for multiple applications
simultaneously?
A: The remote control is designed to work with various
applications but should be used for one application at a time for
optimal performance.
Areas of application: Remote control switches,alarm systems, , remote control door locks, remote control electric shutter doors and Windows, water pump control, industrial control products, etc.; technical parameters:
Working voltage: DC9V Working frequency: 434.0125MHz Standby current: 0MA Working current: > 80MA Encoding Type: fixed code (2264) and learning code (EV1527) Transmission distance: > 30 m (open area sensitivity more than 103 dBm) Output power: 30 m (0 DBM); Transfer rate: < 10 KBPS Modulation mode: ASK (amplitude modulation) Working temperature: – 10 ~ + 70 Size:136 * 42.2 * 25 mm * Tips: 1. This series of remote wireless remote control with 1/2/key optional;
2.With the power switch, remote control can turn off the power save electricity when not in use.
FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.
Documents / Resources
 |
Shenzhen AK-A101 Remote Control Switches, Alarm Systems [pdf] Owner's Manual 2AZHW-AK-A101, 2AZHWAKA101, ak a101, AK-A101 Remote Control Switches Alarm Systems, AK-A101, Remote Control Switches Alarm Systems, Control Switches Alarm Systems, Switches Alarm Systems, Alarm Systems, Systems |