Shenzhen LogoBLUETOOTH VOICE LED CLOCK CONTROL
RECEIVER MANUAL

ELECTRONIC PARAMETERS

Adapter: 5V2A
Rated power: 9w
Rechargeable battery: 1200mAH/3.7V (normal)
wet tips: LED products consume more power, it is recommended to plug in !

Shenzhen 6606 Bluetooth Voice LED Clock Control Receiver

MAIN FUNCTIONS

  1. Bluetooth speaker, FM radio, TF, U disk, AUX
  2. year, month, day, hour, minute, week, 12/24 hours system (date and time can be set to automatically switch)
  3. 2 Group alarm, 6 ringtones, snooze function
  4. screen brightness 4 manual adjustment
  5. voice control function
  6. night light, seven color light mode

Shenzhen 6606 Bluetooth Voice LED Clock Control Receiver - TimeON/OFF SETTING COUNTDOWN TO SHUTDOWN
ON OFF Long press the device Shenzhen 6606 Bluetooth Voice LED Clock Control Receiver - Iconkey for 3 seconds, turn on or off the short button, in the radio, Bluetooth audio, TF mode, you can set the shutdown time
CONNECT YOUR PHONE’S BLUETOOTH SETTINGS

  1. After turning on the phone, short press the BT Bluetooth key to turn on the Bluetooth mode. “BT” will appear on the
  2. screen to turn on the phone Bluetooth and find the XM6606 Bluetooth. The name can be paired and connected. Play Pause
  3. in Bluetooth mode
    Up key Shenzhen 6606 Bluetooth Voice LED Clock Control Receiver - Icon 1Volume -/ Previous song
    Silver: Short press this key Up song: Long press volume reduction II Move
    Pause key: Short press this body to capture and play intelligent stop Receiver Shenzhen 6606 Bluetooth Voice LED Clock Control Receiver - Icon 2Volume +/ Down key:
    Short press this key to the next song; Long press volume plus

Shenzhen 6606 Bluetooth Voice LED Clock Control Receiver - ModeFM RECEIVER USE METHOD

  1. In the boot state, short buttonShenzhen 6606 Bluetooth Voice LED Clock Control Receiver - Icon 3, open the radio mode
  2. long press the self-keyShenzhen 6606 Bluetooth Voice LED Clock Control Receiver - Icon 3 for 3 seconds, the radio automatically search station, save station
  3. in the radio mode:
    Shenzhen 6606 Bluetooth Voice LED Clock Control Receiver - Icon 1 Pu-/Up key: short press this key on a channel:
    long technology volume reduction Shenzhen 6606 Bluetooth Voice LED Clock Control Receiver - Icon 4Play grinding stop key: short press this key to play pause Shenzhen 6606 Bluetooth Voice LED Clock Control Receiver - Icon 5Volume + down key:
    Short press this key Next channel: long press volume plus

TF CARD, U DISK USE METHOD

  1. When the TF card is on, plug it in
  2. Short press BT key to switch to TF card, the screen shows “TF’ symbol
  3. In TF card mode:
    Shenzhen 6606 Bluetooth Voice LED Clock Control Receiver - Icon 1 -Volume one/Up warp key: Short technique on this key:
    Long press volume lessShenzhen 6606 Bluetooth Voice LED Clock Control Receiver - Icon 4 Play Pause key: Short press this
    key to play pause+ Volume Shenzhen 6606 Bluetooth Voice LED Clock Control Receiver - Icon 5Down warp key: Short press this key
    Next: Long press volume plus Follow this method to play USB stick songs

Shenzhen 6606 Bluetooth Voice LED Clock Control Receiver - USB

YEAR, MONTH, DAY, HOUR, MINUTE, WEEK SETTING METHOD

  1. Bluetooth automatic timing
    (some mobile phones do not support this function, please set it manually) After starting up, press the BT Bluetooth key to open the Bluetooth mode, the screen appears “BT” to open the Bluetooth of the mobile phone, find the XM6606 Bluetooth name to pair and connect, and the time will be automatically timed.
  2. Manual setting
    key, In the time mode, long press the SET key, the screen will appear a number blink, short press the key or set the “year”; In this way, respectively set “month”, “day”, “12/24″ hour system,” hour “and” minute”.
  3. Date and time switch automatically In time mode, press the set key to set the date and time switch automatically

2 GROUP ALARM, 6 RING TONES, SNOOZE FUNCTION SETTINGS

  1. In the time state, press the Shenzhen 6606 Bluetooth Voice LED Clock Control Receiver - Icon 6 key to turn on or off the alarm; Long press the keyShenzhen 6606 Bluetooth Voice LED Clock Control Receiver - Icon 6 the screen “hour” appears flashing, then short pressShenzhen 6606 Bluetooth Voice LED Clock Control Receiver - Icon 1 key or Ikey, adjust “then short press back keyShenzhen 6606 Bluetooth Voice LED Clock Control Receiver - Icon 6 screen ” minutes “began to flash, then short press-Shenzhen 6606 Bluetooth Voice LED Clock Control Receiver - Icon 1 key or + key, adjust” minutes “; Then short press the back keyShenzhen 6606 Bluetooth Voice LED Clock Control Receiver - Icon 6 the screen appears Shenzhen 6606 Bluetooth Voice LED Clock Control Receiver - Icon 1 move, and then short press the keyShenzhen 6606 Bluetooth Voice LED Clock Control Receiver - Icon 1 or Shenzhen 6606 Bluetooth Voice LED Clock Control Receiver - Icon 1 key, select the corresponding alarm track. Follow this method to set the alarm 2
  2. When The alarm rings, touch the LIGHT SNOOZE button to start the snooze function, 5 minutes later, the alarm rings again; In this way, you can operate repeatedly, press any other key to cancel the alarm.

SCREEN 4 BRIGHTNESS ADJUSTMENT VOICE CONTROL ON AND OFF

  1. In the time state, press the of screenShenzhen 6606 Bluetooth Voice LED Clock Control Receiver - Icon 5  key to set the brightness
  2. In the time state, press theShenzhen 6606 Bluetooth Voice LED Clock Control Receiver - Icon 5 key and “On” or “OFF” will appear on the screen to indicate voice control on or off. When the voice control is turned on, the screen will automatically light up after 80 decibels of sound appears in the surrounding environment. When the voice controlis turned off, the screen lights up.

Shenzhen 6606 Bluetooth Voice LED Clock Control Receiver - Lighting

NIGHT LIGHT, SEVEN COLOR LIGHT MODE
Touch the LIGHT SNOOZE Nightlight key and Nightlight Large – Medium – Small – Magic Light 1- Magic Light 21 Magic Light 3 1 Magic Light 4- Off.
CHARGE SYMBOL DEFINITION
When the product lacks power, the screen charging symbol Shenzhen 6606 Bluetooth Voice LED Clock Control Receiver - Icon 7” long bright, charging ” symbol “flashes when charging, fully charged, charging symbol” Shenzhen 6606 Bluetooth Voice LED Clock Control Receiver - Icon 7“disappear.

Shenzhen 6606 Bluetooth Voice LED Clock Control Receiver - Charging

FCC Warning

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.Shenzhen Logo

Documents / Resources

Shenzhen 6606 Bluetooth Voice LED Clock Control Receiver [pdf] User Manual
2BMTO-6606, 2BMTO6606, 6606 Bluetooth Voice LED Clock Control Receiver, 6606, Bluetooth Voice LED Clock Control Receiver, Voice LED Clock Control Receiver, LED Clock Control Receiver, Clock Control Receiver, Control Receiver, Receiver

References

Leave a comment

Your email address will not be published. Required fields are marked *