Shenzhen Xiwxi Technology V8 TWS Bluetooth Headset
Thanks for use our wireless electronic products. For a good use experience, please read the manual carefully before use the products. Notice: to avoid unnecessary troubles please do not disassemble these products by yourself and use the standard charger.
Product Overview
Ear caps
We provide three sizes of ear caps (large, medium and small). Please use the proper size of ear caps to fit your ears to get a better wearing experience.
Pairing Manual
- Take out the two earbuds from the charging case and peel off the insulating film.
- Put the earbuds into the charging case to charge (the earbuds are in charging state).
- Take out the two earbuds, they will turn on and pair automatically and will be prepared for pairing to the phone (the indicator will turn to Red and blue alternately).
- After successful paired the indicator of the right earbud will go off and the indicator of left earbud will turn to Red and blue alternately.
- Turn on the Bluetooth function on your phone and search【 V8 】and connect it.
Siri and other Voice Assistant
IOS and part of the Android users can triple touch the left or right haptic button to turn on the voice assistant.
Turn ON
Take out the earbuds from the charging case or touch the haptic button for 3 seconds until the blue indicators flash once.
Turn OFF
Put the earbuds into the charging case, they would turn off and star charging or disconnect the Bluetooth, it will turn off in about 5 minutes.
LED Indicator
Charging case indicator
Status Indicator
- Charging to case Orange indicator flash
- Full Battery Orange indicator stay solid
- Charging for earbuds Orange indicator flash
- Low Battery Orange indicator flash
Earbuds indicator
Status Indicators
- Turn on Blue indicators flash one second
- Turn off Red indicators flash one second
- Searching mode The indicator lights will flash red and blue
- Pairing successfully No light
- Music-play mode No light
- Battery low Red indicators flash
- Charging mode Red indicators stay solid
- Fully charged Red indicators off
Restore factory setting
Please turn off the Bluetooth of the mobile phone and the earphone light will flash red / blue. Quickly press the power button of the earphone four times.
Charge
Note: Please put both earbuds in the charging case to fully charge them on first use.
Charging earbuds
Red indicators flash when battery low, please charge in time.
1. Put both earbuds into the charging case, they will charge automatically.
2. Charging will stop when earbuds are fully charged.
Charging Case
Orange indicator flashes when charging case with low battery, please charge in time. Plug the TYPE-C cable into the charging interface and the charging case will charge automatically. (When charge current over 5V 1A, the charging case will limit the current automatically)
WARM NOTICE
For any single earphone, when it is in standalone mode, you can’t use it to play the previous song or decrease the volume
PARAMETER SELECTION
WIRELESS CHARGING
Designed for the modern life, never be strangled by charging cables.
Enjoy the convenience of wireless charging and free charging devices provided by airports, hotels, and cafe shops around the world
WATER PTOOF
Waterproof for daily life (you cannot submerge into water), you can wear them while showering, swimming, washing face, having a bath or other activities where earbuds are exposed to rain or water, but not while you are diving
Please note this when you swim (as illustration):
Attentions
- Please do not use this product while diving as water will block signal.
- Do not use corrosive liquid to clean this product.
- If this product is accidentally exposed to chemicals, clean it with water
- To avoid explosion, please do not throw this product into fire.
- To avoid scratches, please do not touch the earbuds with sharp objects.
- Do not insert objects into the earbuds, otherwise it would cause damage to the internal components.
- Do not disassemble the earbud.
- Please keep regular charge to these earbuds, don’t leave them become empty battery status to save their longer use lifetime.
BATTERY WARNNG:
There is a built-in lithium battery in this product. To avoid explosion, do NOT expose the product to strong sunlight, fire or throw it into fire.
FCC Caution：
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Documents / Resources
 |
Shenzhen Xiwxi Technology V8 TWS Bluetooth Headset [pdf] User Manual V8, 2ASLT-V8, 2ASLTV8, V8 TWS Bluetooth Headset, TWS Bluetooth Headset |
