Shenzhen Quanmeng Technology A16 Business Bluetooth Headset with Charging Case
Package List
Product Overview
Key Functions
For Android
Headset volume and android phone volume are Not synchronized. Even if the headset volume is full blast, you Can increase the volume on t.indroid
For ios
Headset volume Lind ios device volume are synchronized, so you can modify volume by headset or by the ios device
Mute Control
Mute On/Off long-press •v+· for 3S during .1 call
Power ON/OFF
Two Charging Models 
Features
- Built-in intelligent voice prompts
- Built-in High definition microphone, advanced 4X noise-canceling technology
- Ergonomics, lightweight design. 180 degrees rotatable apply to both left and right e.Jrs
- Separate power mute and volume buttons allow easy access and control
- Pair easily with any two Bluetooth devices simultaneously
- Compatible with. all Bluetooth-enabled devices .Jnd high-fidelity stereo music player
Note: Before First-time Use
- Please take out the headset from the charging case and remove the insulating sheet
- Please full charge headset and charging case
Smart Control
Pick Up to Answer
The headset can be activated within 35 after leaving the case, and it can be used without wearing it for a long time 
Two Charging Models
Headset Pairing
Super Easy to Pair Pick up the headset from the charging case connect Bluetooth <- Al6 >
- Pick up a headset from the charging case, and then the headset will enter into the pairing model
- Turn on the device Bluetooth and search for A16”’ to connect
Pair with 2 Device Simultaneously
- Follow .. Headset Pairing” to pair the first Bluetooth device.
- Turn off the first Bluetooth device, then the headset on the second Bluetooth device.
- Turn on the first Bluetooth device
- Turn off the headset. then turn on the headset again. the headset fill automatically the first Bluetooth device, now the headset pair with 2 devices simultaneously
PORTABLE BATTERY CASE
More than 24 hrs of listening time with multiple additional charges in the case
Product Specifications
- Headset battery capacity: 55mAh
- Charging case battery capacity:S00mAh
- Talk time:4.5 hrs
- Music playtime: 4 hrs
- Headset charging time: about 2 hrs
- iPhone battery indication
- Standby time:100 hrs
- Bluetooth version:5.0
- Operating range: up to 33 feet (Accessibility, Empty place)
- Support HFP, HSP, A2DP, and AVRCP protocol
Replaceable Earplugs
- Use DC-SV lA chargers adapters certified by a regulated m,1nufocturer to charge the case
- Do not overcharge the battery of the case for a too long time, which will decrease the battery service life
- Battery usage by children should be supervised
- Dispose of batteries according to —-loc(1I regulations and recycle when Warranty possible
- Do not dispose of household waste
- In the event of a battery leak, do not .allow the liquid to come In contact with the skin or eves. In the event of a leak or n hazard seek medical help immediately
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
Documents / Resources
 |
Shenzhen Quanmeng Technology A16 Business Bluetooth Headset with Charging Case [pdf] User Manual A16, 2AWO9-A16, 2AWO9A16, A16 Business Bluetooth Headset with Charging Case, Business Bluetooth Headset with Charging Case |
