Shenzhen Ai Infinite Electronics A001 3-In-1 Wireless Charger

Features

1. iPhone Lighting interface design, support 5W/7.5W/10W.
2. Fashionable can use as a phone holder.
3. 3in1 wireless fast charger can charge iPhone, Watch(Ql standard),T WS at the same time.
4. Application:Hotel,Office,Home,Restaurant,Bar Etc.

Specification

Instructions for use

1. When charging another device .please plug the supplementary USB cable to a normal 5V adapter or USB interface with QC3.0
2. When charging the iPhone, iWatch, or TWS insert the iPhone into the Lighting interface, lay the iWatch or TWS on the charging area, and charging starts after 0.5 seconds. When charging is complete, the device can be removed directly During the charging process, if the device needs to terminate the charging, it can be removed directly.

Safety Tips and Precautions

1. The installation of the Power source and socket must comply with safety regulations.
2. Adapter Voltage:4.9-5.3V, Non-standard power supply is not allowed
3. Don’t disassemble or break the product by yourself to avoid damage to the product
4. Do not expose this product to rain or moisture or high temperature
5. Please use this product in the temperature range of -10’c-35’C.
6. Please put the product away from flammable and explosive liquids, gases or explosives
7. For safety reasons, this product needs to be kept away from children
8. Do not put magnetic cards and metal objects in the charging area

Federal Communications Commission Notice

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generatesuses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator & your body.

Documents / Resources

Shenzhen Ai Infinite Electronics A001 3-In-1 Wireless Charger [pdf] User Manual A001, 2A7ID-A001, 2A7IDA001, A001 3-In-1 Wireless Charger, 3-In-1 Wireless Charger

References

• User Manual