Shelly PLUGUS-GEN4 Plug US Gen4 Smart Devices
Product Information
Specifications
- Model: Shelly Plug US Gen4
- Connectivity: Wi-Fi, Bluetooth, Zigbee
- Indoor Use Only
- Max Load Capacity: Refer to specifications for individual appliance
Safety information
For safe and proper use, read this guide, and any other documents accompanying this product. Keep them for future reference. Failure to follow the installation procedures can lead to malfunction, danger to health and life, violation of law, and/or refusal of legal and commercial guarantees (if any). Shelly Europe Ltd. is not responsible for any loss or damage in case of incorrect installation or improper operation of this device due to failure to follow the user and safety instructions in this guide.
This sign indicates safety information.
This sign indicates an important note.
- CAUTION! Connect the Device only to a power grid and appliances that comply with all applicable regulations. A short circuit in the power grid or any appliance connected to the Device can cause fire, property damage, and electric shock.
- CAUTION! The Device may be connected to and control only electric circuits and appliances that comply with the applicable standards and safety norms.
- CAUTION! Do not connect the Device to appliances that exceed the specified maximum electric load.
- CAUTION! Immediately unplug the Device from the power outlet if it emits smoke, makes noise or has an unusual smell.
- CAUTION! Connect the Device only in the way shown in these instructions. Any other method could cause damage and/or injury.
- CAUTION! The circuit on which the Device is operated must be secured by a cable protection switch in accordance with EN60898-1 (tripping characteristic B or C, max. 16A rated current, min. 6 kA interrupting rating, energy limiting class 3).
- CAUTION! Do not use the Device if it shows any sign of damage or defect.
- CAUTION! Do not attempt to repair the Device yourself.
- CAUTION! The Device is intended only for indoor use.
- CAUTION! Do not use the Device in a damp environment. Do not allow the device to get wet.
- CAUTION! Keep the Device away from dirt and moisture.
- CAUTION! Do not plug Devices into each other.
- CAUTION! Do not plug in any direct plug-in equipment in the Device. Examples of direct plug-in equipment include plug-in transformers, battery rechargers, etc.
- CAUTION! Do not operate covered.
- WARNING! Do not use the Device to power or control the on/off status of life support equipment.
- WARNING! Do not use the Device to operate equipment when inaccurate timing or accidental on/off commands could be dangerous. Examples of such equipment are saunas, sunlamps, electric blankets, etc.
- CAUTION! Do not allow children to play with the buttons/switches connected to the Device. Keep the devices (mobile phones, tablets, PCs) for remote control of Shelly away from children.
Product description
Shelly Plug US Gen4 (the Device) is a Matter- compatible smart plug/outlet with power measurement and overheating protection, which allows remote control of electric appliances.
The Device comes with factory-installed firmware. To keep it updated and secure, Shelly Europe Ltd. provides the latest firmware updates free of charge. Access the updates through either the embedded web interface or the Shelly Smart Control mobile application. Installation of firmware updates is the user’s responsibility. Shelly Europe Ltd. shall not be liable for any lack of conformity of the Device caused by the failure of the user to install the available updates in a timely manner.
Schematic
Legend
- A: Socket – NEMA 5-15 (Type-B)
- B: Control button
- C: Light sensor
- D: LED indication band
- E: Plug – NEMA 5-15 (Type-B)
LED indications
When plugged for the first time:
- Blue light flashing, indicating AP mode.
When plugged/powered again after being successfully connected to a Wi‑Fi network:
Red light flashing, indicating the the Device is reconnecting to the Wi‑Fi network.
When output is On:
Power consumption represented by a smooth color change (Default).
- User can select the brightness (Default brightness – 100%):
- Green light at 0% of power limit set
- Yellow light at 50% of power limit set
- Red light at 100% of power limit set
- Custom color (Default color – green, Default brightness – 100%)
- Off
When output is Off:
- Off (Default)
- Custom color (Default color – red, Default brightness – 100%)
When the control button is pressed and held for 3 sec (only when the Device output is Off):
- Red light flashes three times, indicating the Device is not connected to the Wi‑Fi network.
- Yellow light flashes three times, indicating the Device is connected to the Wi‑Fi network, but not to Shelly Cloud.
- Green light flashes three times, indicating the Device is connected to
- Shelly Cloud.
The LED indication can be disabled from the Device settings.
- Press to turn on/off the plugged appliance.
- Press and hold for 3 sec to check the Device status*.
- Press and hold for 5 sec to activate Device AP**.
- Press and hold for 10 sec to factory reset**.
- Press 3 times in quick succession to activate Zigbee inclusion mode**.
- * Only when the output is Off.
- ** Only within 1 min after plugging/powering the Device.
Installation instructions
CAUTION! Before you plug in an appliance into the Device, make sure that the Device output is turned off.
For security reasons, after you successfully connect the Device to the local Wi-Fi network, we recommend that you disable or password-protect the Device AP (Access Point).
To perform a factory reset of the Device, press and hold the Reset/control button for 10 seconds.
To enable the access point and the Bluetooth connection of the Device, press and hold the Reset/control button for 5 seconds.
- Insert Shelly Plug US Gen4 into a power socket without an appliance/load connected to it.
The LED indication ring will start flashing with a blue light, indicating the Device is in Access Point (AP) mode. - You can now plug an appliance into the Device socket.
- To turn the appliance on, press briefly the control button.
The LED indication ring will illuminate. The light color depends on the load (check LED indication below). - Press the control button again to turn the appliance off.
The LED indication will return to its previous status.
Embedded web interface
The Device has an embedded web interface which allows you to monitor, control the Device, and adjust its settings. The web interface is accessible at http://192.168.33.1 when connected directly to the Device access point or at its IP address when you and the Device are connected to the same network.
The Device AP name looks like ShellyPlugUSG4-XXXXXXXXXXXX
You can find more information about the embedded web interface at: http://shelly.link/webui-guide.
Shelly Cloud inclusion
The Device can be monitored, controlled, and set up through our Shelly Cloud home automation service. You can use the service through either our Android, iOS, or Harmony OS mobile application or through any internet browser at https://control.shelly.cloud/.
If you choose to use the Device with the application and Shelly Cloud service, you can find instructions on how to connect the Device to the Cloud and control it from the Shelly app in the application guide: https://shelly.link/app-guide.
API
The Device can access and interact with other smart devices or automation systems if they are in the same network infrastructure. Shelly Europe Ltd. provides APIs for the devices, their integration, and cloud control. For more information, visit https://shelly-api-docs.shelly.cloud.
Specifications
Physical
- Size (HxWxD): 38x64x51 mm / 1.42×2.52×1.99 in
- Weight: 61 g / 2.15 oz
- Compatible sockets: NEMA 5-15 (Type-B)
- Compatible plugs: NEMA 1-15 (Type-A) and NEMA 5-15 (Type-B)
- Shell material: Plastic
- Shell color:
- White
- Black
Environmental
- Ambient working temperature: -20°C to 40°C / -5°F to 105°F
- Humidity: 30% to 70% RH
- Max. altitude: 2000 m / 6562 ft
- Glow-wire temperature: 750 °C
- Pollution degree: 2
- Pollution degree: 2
- Required forced cooling: No
- Degree of protection IP 20
Electrical
- Power supply: 120 V AC, 60 Hz
- Power consumption: < 1.5 W
- Rated impulse-withstand voltage: 1500 V
Output circuits ratings
- Max. switching voltage: 120 V AC, 60 Hz
- Max. switching current: 15 A
- Max. output power: 1800 W (resistive load only)
- Number of switching cycles: 10000
- Overvoltage category: II
- Duty-type S1
- Switch type: One-way
- Switch configuration: SPNO (Single-Pole, Normally-Open)
- Type of circuit disconnection: Micro
Sensors, meters
| 100 | Internal-temperature sensor: | Yes |
| 101 | Voltmeter (AC): | Yes |
| 102 | Ammeter (AC): | Yes |
| 103 | Power and energy meters: | Yes |
| 104 | Light sensor: | Yes |
| 105 | Radio | |
| 106 | Wi-Fi | |
| 107 | Protocol: | 802.11 b/g/n/ax |
| 108 | RF band: | 2401-2473 MHz |
| 109 | Max. RF power: | < 20 dBm |
| 110 | Range: | Up to 50 m / 164 ft outdoors, up to 30 m / 98 ft indoors (depending on local conditions) |
| 111 | Bluetooth | |
| 112 | Protocol: | 4.2 |
| 113 | RF band: | 2402 – 2480 MHz |
| 114 | Max. RF power: | < 4 dBm |
| 115 | Range: | Up to 30 m / 98 ft outdoors, up to 10 m / 33 ft indoors (depending on local conditions) |
| 116 | Zigbee | |
| 117 | Protocols: | 802.15.4 |
| 118 | RF bands: | 2400 to 2483.5 MHz |
| 119 | Max. RF Power: | < 20 dBm |
| 120 | Range: | Up to 100 m / 328 ft indoors and 300 meters / 984 ft outdoors(Depends on local conditions) |
| 121 | Microcontroller unit | |
| 122 | CPU: | ESP-Shelly-C68F |
| 123 | Flash: | 8 MB |
| 124 | Firmware capabilities | |
| 125 | Webhooks (URL actions): | 20 with 5 URLs per hook |
| 126 | Schedules: | 20 |
| 127 | Advanced schedules: | Yes |
| 128 | Scripting: | Yes |
| 129 | MQTT: | Yes |
| 130 | UDP: | Yes |
| 131 | Encryption: | Yes |
| 132 | KVS (Key-Value Store): | Yes |
| 133 | Troubleshooting | |
| 134 | In case you encounter problems with the installation or operation of the Device, check its knowledge base page: | |
| 135 | https://shelly.link/plug_us_gen4 | |
| 13 6 |
Cleaning | |
| 13 7 |
||
| CAUTION! Before cleaning the Device, power off the connected appliance, unplug it and only then unplug the Device. Never clean the Device if it is connected to the power grid. | |
| 13 8 |
CAUTION! Do not use aggressive detergents. |
| 13 9 |
CAUTION! Do not immerse the Device or wash it under running water. |
| 14 0 |
Use a soft damp cloth to clean the Device. |
| 14 1 |
FCC Notes |
| 14 2 |
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
|
| The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification or change to this equipment. Such modifications or change could void the user’s authority to operate the equipment. | |
| This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: | |
| Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. |
|
| Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. | |
| Consult the dealer or an experienced radio/TV technician for help. |
RF exposure statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. It should be installed and operated with minimum distance 20 cm between the radiator & your body.
Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Disposal and recycling
This refers to the waste of electrical and electronic equipment. It is applicable in the EU, US and other countries to collect waste separately.
This symbol on the product or in the accompanying literature indicates that the product should not be disposed of in the daily waste. Shelly Plug US Gen4 must be recycled to avoid possible damage to the environment or human health from uncontrolled waste disposal and to promote the reuse of materials and resources. It is your responsibility to dispose of the device separately from general household waste when it is already unusable.
- Manufacturer: Shelly Europe Ltd.
- Address: 51 Cherni Vrah Blvd., bldg. 3, fl. 2-3, Sofia 1407, Bulgaria
- Tel.: +359 2 988 7435
- E-mail: support@shelly.cloud
- Official website: https://www.shelly.com
- Changes in contact information are published by the Manufacturer on the official website.
- All rights to the trademark Shelly® and other intellectual rights associated with this Device belong to Shelly Europe Ltd.
FAQ
- Can I use the Shelly Plug US Gen4 outdoors?
No, the Device is intended for indoor use only. Avoid using it in damp environments or allowing it to get wet. - What should I do if the Device shows signs of damage?
If the Device shows any sign of damage or defect, do not use it. Contact customer support for further assistance. - Can children play with the Shelly Plug US Gen4?
No, children should not play with the buttons/switches connected to the Device. Keep remote control devices away from children’s reach.
Documents / Resources
 |
Shelly PLUGUS-GEN4 Plug US Gen4 Smart Devices [pdf] User Guide PLUGUS-GEN4 Plug US Gen4 Smart Devices, PLUGUS-GEN4, Plug US Gen4 Smart Devices, Smart Devices, Devices |
