LED WORD CLOCK
INSTRUCTION MANUAL

208734 LED Word Clock

Congratulations! You own a fascinating and unique time piece. This is the only clock that selectively highlights a matrix of words to display the current time.
The time is displayed as text in five minute intervals

For example:
If the time were 6:25, the clock would display “it’s twenty five minutes past six”. If the time were 11:40, the clock would display “it’s twenty to twelve”. If the time were 10:30, the clock would display “it is half past ten”.

HOW TO SET THE TIME

1. Plug in the included adapter on the right side of the clock.
2. The clock will flash random words and will then flash all of the words. When the words stop flashing you can set the clock to the current time.
3. Long Press and hold the button”+” to advance the time by 5 minute intervals. Long Press and hold the button”-“to decrease the time by 5 minute intervals.
4. Continuously hold down the plus or minus button to advance through the time.
5. When you reach the current time, the clock is automatically set and will advance the time every 5 minutes.
6. Short Press button”+” to adjust the LED light dimmer, it has total 3 kinds of dimmers

Documents / Resources

SHARPER IMAGE 208734 LED Word Clock [pdf] Instructions 208734, LED Word Clock, 208734 LED Word Clock, Word Clock, Clock

References

• User Manual