SHARP Washing Machine User Manual
ES-W95TWXT ES-W85TWXT Operation manual
Thank you for purchasing our product. Please read this manual carefully before use. Please read “Safety precautions” carefully before use. Please keep this manual in a safe place. Our product is intended to be used in household and similar applications such as: – staff kitchen areas in shops, offices and other working environment; – farm houses; – by clients in hotels, motels and other residential type environments; – bed and breakfast type environments; – areas for communal use in blocks of flats or in launderettes.
Safety precautions
CAUTION
- To avoid accident /injury, if the power cord is damaged, it must only be replaced by an authorized service staff or contact the nearest Sharp Service Center for assistance.
- If powder detergent or liquid detergent spill over the top lid, or other plastic components, wipe it away immediately, otherwise it may damage them.
- Each time washing is finished, clean lint filter box. Otherwise it may not be effective in filtering lint.
- The new hose-sets supplied with the appliances are to be used and that old hose-sets should not be reused.
Parts of the washing machine
Machine body
List of accessories
NOTE ＊ Bottom cover and Screw are applied by service staff. • Keep the Operation manual and installation manual for future reference.
Specifications
| Intended Use | Household and similar applications | |
| Safety Precautions | Read carefully before use | |
| Parts of the Washing Machine | Machine body and accessories | |
| Installation | See installation manual for detail | |
| Drain Hose | Height from ground should not be under 10cm | |
| Key Points in Washing Clothes | Select course depending on type of clothing or soiled level | |
| Control Panel Functions | LED indicator blinks when in operation | |
| Maintenance | Clean lint filter box every time after use | |
| Common Non-Fault Phenomenon | Refer to this section if there is an abnormality | |
Installation
See Installation manual for detail.
The way to check whether the product is installed correctly
Drain hose
- If a floor drain is used, the height from the ground should not be under 10 cm.
- If the drain hose is too high, the water supply will not stop. This time, you should adjust the drain hose so that the clearance to the floor is below 10cm, The water will drain out, and then start again.
- Plug the drain hose into the drain port tightly. If the drain hose drops, water will flow to the ground and damage the floor.
- Please do not plug the drain hose to the inside or bottom of washing machine.
- Change the direction of drain hose
- When the draining hose is not long enough, please use extension hose. The length of used extension hose should not exceed 1.5m. (The inner diameter of draining hose is about 3.8cm).
(not easily blocked)
- If the hose is too long, it can be cut off at the narrow part shown in the figure.
Key points in washing clothes
Pay extra attention to the following situations 
Instruction on control panel functions
Control panel / Display 
Things to know before washing
- Select the course depending on the type of clothing or soiled level on clothing.
- Once you press START/PAUSE key, you cannot change the course. When you want to change the course, turn off the power and select the desired course again.
- LED indicator blinks when in operation, and lights when the course is selected.
- The machine generates a beep and turns off when it finishes the course. The beep sound setting can be turned off by pressing COURSE key and AIR DRY key simultaneously after the operation starts.
- When the motor gets hot beyond a safe limit, it fail-safes on itself, and can’t work enough. Do not operate the machines many times in a row.
- In BLANKET course, fold the blanket as below.
- In BLANKET course, keep the blanket below the line.
ECO SHOWER RINSE
Instruction on washing courses
Manual washing course
Additional operating procedure
Maintenance
Water inlet hose connecting port
Lint filter box
Clean it every time after using 
Washing / Spin Drying tub
- Every time after washing, turn off the faucet and power. (If necessary, dismantle water inlet hose.)
- Wipe the water in the tub after washing as soon as possible. Use clean soft cloth.
- Be sure to pull out the plug from the plug socket during maintenance.
- Hanging power cord and drain hose is desirable.
- Open top lid for about 1 hour after cleaning the tub.
- Do not use solvents such as alcohol, cleanser and so on, because they may cause damage to the surface of the tub.
TUB CLEAN
In the case of cleaning the washing / spin drying tub 
Common non-fault phenomenon
(Please refer to this section if there is an abnormality happens.)
Abnormal display
Caution It generates a beep when washing machine indicates abnormal display. As the phenomenon may not be a fault, please check it again before sending the machine for repair. In the case of failure, please consult Sharp Service Center. Be sure not to disassemble and repair the machine without permission.
Common non-fault phenomenon
Inspection of a washing machine that have been used for many years. 
FAQS
If the power cord is damaged, it must only be replaced by an authorized service staff or contact the nearest Sharp Service Center for assistance.
If powder detergent or liquid detergent spill over the top lid, or other plastic components, wipe it away immediately, otherwise it may damage them.
Each time washing is finished, clean lint filter box. Otherwise it may not be effective in filtering lint.
No, old hose-sets should not be reused. The new hose-sets supplied with the appliances are to be used.
If the drain hose is too high, the water supply will not stop. This time, you should adjust the drain hose so that the clearance to the floor is below 10cm, The water will drain out, and then start again.
No, please do not plug the drain hose to the inside or bottom of washing machine.
When the draining hose is not long enough, please use extension hose. The length of used extension hose should not exceed 1.5m. (The inner diameter of draining hose is about 3.8cm).
No, once you press START/PAUSE key, you cannot change the course. When you want to change the course, turn off the power and select the desired course again.
When the motor gets hot beyond a safe limit, it fail-safes on itself, and can’t work enough. Do not operate the machines many times in a row.
In BLANKET course, fold the blanket as below. Keep the blanket below the line.
Every time after washing, turn off the faucet and power. (If necessary, dismantle water inlet hose.) Wipe the water in the tub after washing as soon as possible. Use clean soft cloth.
No, do not use solvents such as alcohol, cleanser and so on, because they may cause damage to the surface of the tub.
Refer to the common non-fault phenomenon section if there is an abnormality with the machine.
SHARP CORPORATION OSAKA, JAPAN
Documents / Resources
 | SHARP Washing Machine [pdf] User Manual SHARP, ES-W95TWXT, ES-W85TWXT, Washing, Machin |
