Specifications
- Model: PN-ME432, PN-ME502, PN-ME552, PN-ME652
- Power Source: AAA battery for remote control
Scope
This document describes dismantling instruction according to Annex VII of Directive 2012/19/EU.
Tools for dismantling
- Screw Driver
- Nipper
Dismantle Procedure
This product can be dismantled by below steps.
- Remove Back covers (section 5)
- Remove Printed circuit boards (section 6)
- Dismantle LCD (section 7)
- Remove Electrolyte Capacitors (section 8)
Batteries
This model uses only AAA batteries for remote control. The battery can easily be removed.
Back covers
cover can be removed by screw driver.
- PN-ME432
- PN-ME502
- PN-ME552
- PN-ME652
- PN-ME652
PWB and other electronic components
All electronic components can be removed by screwdriver.
- MAIN PWB
- POWER PWB
PN-ME432 / PM-ME502 / PN-ME552
PN-ME652
- T-CON PWB
- KEY PWB
- IR PWB
- WIFI CTL PWB
- Speaker
LCD Module bezels
- PN-ME432/PN-ME502/PN-ME552
- PN-ME652
Parts List
The spare parts listed in the column “Spare Parts” below are kept available in accordance to legal requirements of EU Regulation 2019/2021 for professional repairer.
| Spare Part | Part Name/ Element of Part |
| a. Internal power board | Power PWB |
| b. Connectors to connect external equipment | Main PWB |
| c. Batteries and Accumulators | not applicable |
| d. DVD/Blue-Ray module | not applicable |
| e. HD/SSD module | not applicable |
FAQs
- Q: Is dismantling the product covered under warranty?
- A: Dismantling the product may void the warranty. It is recommended to check the warranty terms before dismantling.
- Q: Can I reassemble the product after dismantling?
- A: Reassembling the product should be done carefully following the reverse steps of dismantling. It is advisable to seek professional help if unsure.
Documents / Resources
 | SHARP ME432 MultiSync Dismantle [pdf] Instruction Manual PN-ME432, PN-ME502, PN-ME552, PN-ME652, ME432 MultiSync Dismantle, ME432, MultiSync Dismantle, Dismantle |