Sharkoon VK4 ARGB 120mm ARGB PWM Fans User Manual

Water-Cooling Enthusiasts: Supports radiator
up to 360 mm behind the front panel or up to 280 mm under the top
panel.
Room for Large Hardware Components:
Accommodates graphics cards up to 35 cm, CPU coolers up to 16 cm,
and PSUs up to 21 cm.

Easy Expansion for Data Storage: Supports up
to 2x 3.5 HDDs or 4x 2.5 SSDs.
I/O Ports: Two USB 3.0 ports, TRRS port, and
additional connectivity options.

Neat and Tidy: Ample room for cable management
and pre-installed dust filters for efficient ventilation.

Fan Configuration:

Front Panel: 3x 120 mm ARGB PWM Fan
(Pre-installed) or Radiator* (Optional)

Rear Panel: 1x 120 mm ARGB PWM Fan
(Pre-installed)
Top Panel: 2x 120 mm or 2x 140 mm Fan or
Radiator (Optional)

Bottom Panel: 2x 120 mm Fan (Optional)
PWM Fan Hub: 4-Port

RGB Compatibility:

Type Ports: Addressable
Manual Control: 22 Modes

Mainboard Compatibility: MSI Mystic Light
Sync, ASUS Aura Sync, Gigabyte RGB Fusion Ready, ASRock Polychrome
Sync
RGB Pinout: 5V-D-coded-G

Compatibility:

Mainboard Compatibility: Mini-ITX, Micro-ATX,
ATX
Mainboard Max. Length: 35.0 / 37.5** cm

Graphics Card Max. Length: 35.0 cm
CPU Cooler Max. Height: 16.0 cm

PSU Max. Length: 21.0 cm
Radiator incl. Fan (Front) Max. Height: 5.7
cm

Radiator incl. Fan (Top) Max. Height: 5.7
cm

Package Contents:

VK4 ARGB, Accessory Set

EAN Code:

VK4 ARGB Black: 4044951044115

Product Usage Instructions:

1. Installation of Hardware Components:

– Ensure the case is placed on a stable surface.

– Open the side panel to access the interior.

– Install the motherboard, CPU cooler, graphics card, and other
hardware components according to their specifications.

2. Fan and Radiator Installation:

– Mount fans or radiators in the designated areas as per your
cooling preferences.

– Connect the fans to the PWM fan hub for control.

3. Cable Management:

– Organize cables neatly to ensure proper airflow and
aesthetics.

– Utilize the cable management system provided in the case for a
clean interior look.

4. Data Storage Expansion:

– Install HDDs or SSDs in the drive bays as needed for data
storage expansion.

5. I/O Port Usage:

– Connect external devices to the USB 3.0 ports and TRRS port on
the top panel for easy access.

Frequently Asked Questions (FAQ):

Q: Can I install a liquid cooling system in the VK4 ARGB
case?

A: Yes, the VK4 ARGB case supports liquid cooling systems with
radiator sizes up to 360 mm behind the front panel or up to 280 mm
under the top panel.

Q: What is the maximum length of the graphics card that can be
installed in the VK4 ARGB?

A: The VK4 ARGB case can accommodate graphics cards with a
maximum length of up to 35 cm.

“`

View Fullscreen

Specifications

VK4 ARGB
With its perforated front panel and four pre-installed 120 mm ARGB PWM fans, the VK4 ARGB ATX case not only looks stylish but also offers a strong cooling performance right from the start. For water-cooling enthusiasts, there is space behind the front panel for a radiator of up to 360 mm. And thanks to its carefully designed interior, there is not only sufficient room for cable management, but also large pieces of hardware can be accommodated with ease.
Features
STRONG COOLING PERFORMANCE Apart from its perforated, air-permeable front panel, the VK4 ARGB comes pre-installed with four 120 mm ARGB PWM fans as well as an RGB PWM controller for these. The case offers a total of 8 mounting options for fans.
FOR WATER-COOLING ENTHUSIASTS If you prefer water cooling, the VK4 ARGB has enough space for a radiator of up to 360 mm behind the front panel or for a radiator of up to 280 mm under the top panel.
ROOM FOR LARGE HARDWARE COMPONENTS Graphics cards with a length of up to 35 cm can be installed inside the VK4 ARGB. In addition, a maximum height of 16 cm is provided for CPU coolers, and the power supply unit can have a length of up to 21 cm while being neatly accommodated inside the power supply tunnel.
EASY EXPANSION FOR DATA STORAGE For all data-collecting enthusiasts, the VK4 ARGB allows the flexible expansion of up to 2x 3.5″ HDDs or 4x 2.5″ SSDs for sufficient data storage.
FOR THE MOST IMPORTANT DEVICES For the most important peripheral devices, the top of the VK4 ARGB has two USB 3.0 ports as well as a TRRS port. Additional devices can be connected behind the case.
NEAT AND TIDY Thanks to plenty of room for cable management, the inside of the case remains neat and tidy, while all areas of air intake have pre-installed dust filters to ensure a clean and efficient ventilation.

Product Name Form Factor Expansion Slots Interior Painting Tool-Free Devices Installation Cable Management System Side Panel Color Versions Dimensions (L x W x H)

VK4 ARGB ATX 7 Tempered Glass Black 40.4 x 20.6 x 48.7 cm

Max. Drive Bays
2 x 3.5″ | 4 x 2.5″

I/O
USB 3.0 (Top): 2 | Audio (Top): TRRS

Fan Configuration
Front Panel Rear Panel Top Panel Bottom Panel PWM Fan Hub

3x 120 mm ARGB PWM Fan (Pre-installed) or Radiator* (Optional)
1x 120 mm ARGB PWM Fan (Pre-installed)
2x 120 mm or 2x 140 mm Fan or Radiator (Optional)
2x 120 mm Fan (Optional)
4-Port

RGB Compatibility
Type Ports Manual Control Mainboard Compatibility
RGB Pinout

Addressable
4
22 Modes
MSI Mystic Light Sync, ASUS Aura Sync, Gigabyte RGB Fusion Ready, ASRock Polychrome Sync
5V-D-coded-G

Compatibility
Mainboard Max. Length Graphics Card Max. Height CPU Cooler Max. Length PSU Max. Height Radiator incl. Fan (Front) Max. Height Radiator incl. Fan (Top)

Mini-ITX, Micro-ATX, ATX 35.0 / 37.5** cm 16.0 cm 21.0 cm 5.7 cm
5.7 cm

Package Contents
VK4 ARGB, Accessory Set

EAN Code

VK4 ARGB Black

4044951044115

* Installation of a 360 mm radiator can conflict with installation of a 3.5″ HDD ** Without front fan

Documents / Resources

Sharkoon VK4 ARGB 120mm ARGB PWM Fans [pdf] User Manual
VK4 ARGB, VK4 ARGB 120mm ARGB PWM Fans, VK4 ARGB, 120mm ARGB PWM Fans, ARGB PWM Fans, PWM Fans

References

User Manual