SHANTOU E99 Quadcopter Folding Four Axis Remote Control Toy Drone

Product Information

Specifications

• Compliance: Part 15 of FCC Rules
• Interference Conditions: Must not cause harmful interference; must accept any interference received
• Antenna: Reorient or relocate receiving antenna for optimal performance
• Power: Connect to outlet on a separate circuit from receiver

Product Usage Instructions

Installation

1. Ensure the device is placed in a well-ventilated area.
2. Connect the device to a power outlet on a different circuit from any receivers.
3. Position the receiving antenna for optimal reception.

FAQ (Frequently Asked Questions)
Q: What should I do if the device is causing interference?
A: Try repositioning the receiving antenna or relocating the device to minimize interference.

INSTRUCTION FOR USE

Voltlage and curent reuremens for usR chrana lines

Attention
The input voltage and current of USB charging line must not exceed this standard. No three-load adapter is allowed. Otherwise, the USB charging line and battery will be damaged.
The knowledge and safety notes below are useful for you in the remote control world. Please read this manual carefully before operating this product and keep it for further reference.

 THE INSTALLATION OF BATTERY OF REMOTE CONTROL DEVICE

Open the battery cover on the back of remote controller. Insert 3X1. 5V “AA” batteries in accordance with the instructions on battery box. (Battery should be purchased separately, old and new or different types of batteries shouldn’t be mixed. )

THE BATTERY CHARGING OF FLYING DEVICE

1. Insert USB charger into the USB interface on the computer of other chargers and then plug in, the indicator light will be on.
2. Remove the battery from the aircraft, and then connect the battery plug to the socket on the USB charger for charging.
3. The indicator ight will be on in the battery charging process and will be off after charging saturation.

Built-in camera

THE OPERATION AND CONTROL OF FLYING DEVICE

Turn on the switch of the aircraft, turn on the switch of the remote controller, move the left stick throttle up and down and pull it down, a beeping sound will be heard, and the light will be on, indicating that the frequency alignment is successful. If the deviation occurs in the flight of the aircraft, the outer eight correction can be used.

• The left control lever control the rising and falling of fying device.
• The left control lever is to control tutning left /rignh of fying device.
• The right control lever is to control turning marching/retreating t of the flying device
• The right control lever is to control aircraft left and right side fly
  

FINE-ADJUSTMENT

When the flying device is in the flight, it appears deviations (turning left/right; marching/retreating; left/right side) ; it is to adjust them by turning the opposition direction corresponding slight keys. For example: the flying device is deviated to front, so it is to adjust by turning the backward “marching/retreating slight” key as shown in figure

THE SETTINGS OF SENSITIVITY

The aircraft can achieve the 2 modes of operation: low level (30%), high level (100%) Toggle “speed conversion switch” for setting: Slide it, the buzzer on remote controller will beat once = The aircraft moves at a low speed (up to 30%) ; Slide it, the buzzer on remote controller will beat two times = The aircraft moves at a high speed (up to100%).
Through this key, it can adjust sensitivity of flying device, the greater the sensitivity value is, the faster the flying device response; conversely it is slower.

THE ROLLING MODEL

The flying device can perform rolling flight of 360 degrees by following operation. In order to better implement rolling function, and endure flying device is kept five meters height above the ground, it is better to operate rolling in the process of rising up. In this case, the flying device can be kept with height after flying device performs rolling action.

1. Left side somersault: Click “mode of conversion”, and then push the right-control lever to left in maximum After the flying device rolls it is to turn control lever to the middle position
2. Right side somersault: Click “mode of conversion” and then push the right-control lever to right in maximum. After the flying device rolls, it is to turm control lever to the middle position.
3. Front somersault: Click “mode of conversion”, and then push the right-control lever to front in maximum. After the flying device rolls, it is to turn control lever to the middie position.
4. Backward somersault: Click “mode of conversion”, and then push the right-control lever to backward in maximum. After the flying device rolls, it is to turn control lever to the míddle position.
   

AFTER ENTERING INTO THE “ROLL MODE”, IF THERE IS NO NEED OF ROLLING FUNCTIONS, THEN CLICK THE “MODE CONVERSION” KEY

HEADLESS MODE WITH ONE KEY RETURN

That is in flight, no matter what position the aircraft is, no matter what direction it’s in, as long as you click on the headless mode button, automatic locking direction aircraft takeoff.

1. of the code of the aircraft must head toward the front (or rear headless mode and automatic mode opening direction will return disorder)
2. When you need to use the headless mode, click on the headless mode key, and the vehicle will automatical ly lock the di rection of takeoff.
3. When you do not use the headless mode, then click the headless mode button to exit the headless mode.
4. When you want to automatically return, click the button to automatically return the aircraft is in the direction of takeoff, and will be automatically refunded.
5.  The automatic return process can be controlled manually about the direction of the aircraft, pushing the joystick forward to exit the automatic return function.

Warning: Try to choose less vision and pedestrians at the place with this aircraft, so as to avoid unnecessary losses!

TROUBLESHOOTING DURING FLIGHT

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1.  This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Documents / Resources

SHANTOU E99 Quadcopter Folding Four Axis Remote Control Toy Drone [pdf] Instruction Manual 2BLFO-E99, 2BLFOE99, E99, E99 Quadcopter Folding Four Axis Remote Control Toy Drone, E99, Quadcopter Folding Four Axis Remote Control Toy Drone, Folding Four Axis Remote Control Toy Drone, Axis Remote Control Toy Drone, Remote Control Toy Drone, Control Toy Drone, Toy Drone

References

• User Manual