SHANGRAN ELECTRICAL F9 Socket User Manual

SHANGRAN ELECTRICAL F9 Socket

Product Information

Product Name: SOCKET
Model: F9
Batch/Serial Number: 20260318

Manufacturer & EU Representative Info

• Manufacturer: [Company Name: WENZHOU SHANGRAN ELECTRICAL CO.,LTD., Full Address:
  China Zhejiang Province Wenzhou Ouhai District Quxi Sub district Qurenlu Sanyi Industrial Park
  Building 1 Floor 4, Email: 1432020646@qq.com]
• EU Authorized Representative: [AR Company Name: ECLAT SOLUTION SARL, Full Address:
  Bureau 1145, 37 Passage du Ponceau, Telephone: +33 187652619, Email: eclatsolution@outlook.com]

Compliance Information

Safety & Warnings

Important Safety Information

Risk of electric shock: Improper handling may result in injury and property damage. If you are unsure about any part of these instructions, contact a qualified electrician for professional help.

• Make sure that the switch is off before connecting.
• When using, follow the actual parameters indicated on the back of the product.
• Before installation, please make sure that all the equipment is worn out and the wiring is normal.
• Please read and fully understand the instructions carefully before starting work. If you have any questions, please contact our customer support team.

Instructions for Use

1. Before First Use: Remove all protective films from the device.
2. Turn off the circuit breaker and use the electrical tester to test the power
3. Ensure the circuit breaker is off before wiring
4. Remove the old switch and pull it away from the wall. Identify Line/Load Wire (Note: The color of your wire may be different from the color shown on the manual)
5. We recommend you remove the faceplate from the old switch and use an electrical tester to test all wires connected to the switch to ensure there is no voltage in the circuit.
6. Take photos of the original route first
7. Charging: Connect the provided USB cable to a certified 5V power adapter.

Installation steps

1. Analyze the socket section
   
2. Connecting wires
   
3. Screw fixation
   
4. Fix the product to the wall
   
5. Cover the panel
   
   • Reassemble the socket components and cover the panel

Dismantling the panel

• Dismantling the panel
  Insert the screwdriver into the card slot, lift or rotate the screwdriver outward to separate it.