SEVEN Wall Clock User Manual

SEVEN Wall Clock

over view

Specifications

• Compliance: EN IEC 55014-1:2021, EN IEC 55014-2:2021, EN IEC 61000-6-3:2021, EN IEC 61000-6-1:2019
• Power Source: 1 AA battery (some models require 2 batteries)
• Time Adjustment: Rear knob (counterclockwise for minute hand)
• Movement: Silent design (no gear noise)

Usage Instructions

Before You Start

• Please read the instructions carefully. Keep the instructions for future reference.|
• Sort the parts and ensure the set is complete. Familiarize yourself with the assembly method and follow the instructions.
• We recommend assembling the product as close as possible to its final location to avoid unnecessary movement.
• Ensure the product is placed on a flat and stable surface.
• Keep packaging materials and product components out of reach of children.

Product Diagram

Refer to the provided diagrams for front and back views of the product.

Installation Steps

Wall Mounting
Steps:

• Drill holes at the desired mounting location using a power drill or similar tool;
• Embed the expansion bolts into the holes using a hammer or similar tool.
• Screw the nails into the expansion bolts using a power drill or similar tool.
• Align the clock’s back wall-mount holes with the nails, secure the clock, and gently pull to test stability.

Battery Installation
Steps:

• Open the battery compartment cover on the back.
• Insert 1 AA battery according to the polarity markings (some models require 2 batteries);
• Close the cover and gently move the hands to reset their position. Wall mounting steps are illustrated in the diagram below:

Parts

Assembly

• THIS INSTALLATION METHOD IS ALSO APPLICABLE TO THESE PRODUCTS.

Functional setting

Time Calibration

• Rotate the time-setting knob on the back cover counterclockwise to adjust the minute hand to the correct time.
• The hour hand will automatically synchronize with the minute hand (silent design with no gear noise).

Precautions
 Safety Notices:

• Avoid damp or vibrating areas when wall-mounting.
• Battery leakage must be cleaned immediately, and batteries replaced.

Maintenance Recommendations:

• Clean the clock face monthly with a soft cloth.
• Batteries typically last about one year; regular replacement is recommended.

Additional Notes:

• The hands are fragile; avoid direct contact to prevent bending.
• Hands may deform easily; if deformed, customers should gently reshape them.
• When forcibly stopped by external force, the internal gears will rotate in the opposite direction – this is normal.