Setti plus SR200 Smart Remote Owner’s Manual

 Setti plus SR200 Smart Remote Owner’s Manual

SAFETY CONDITIONS & HAZARDS

1. Do not start the device if it is damaged.
   The device must be repaired by the service or a person authorized to do so.
2. Due to safety concerns, only the manufacturer, a service authorized by the manufacturer or a person with appropriate qualifications  may service the device
3. Do not attempt to interfere with the interior of the device.
4. The present product may only be operated by children, who are at least 8 orolder, mentally and/ or physically deficient persons and persons without knowledge of or experience in operation of this appliance type if supervised or instructed in safe operation, with clear understanding of all related risks. Children should not play with the device. Unsupervised children should not carry out the cleaning and maintenance of the device.
5. Do not immerse the device in water or other liquids.
6. The product is intended for indoor use only.
7. The remote is not a toy.
   Keep it out of the reach of children.
8. The range of operation of the remote control is ca. 15 meters, however, it can be limited by walls, interference or other obstacles.

FOREWORD

Thank you for the trust you have placed in us when purchasing a Setti+ device.
We are convinced that this high quality device will provide you with a lot of joy and satisfaction during its use.
PLEASE CAREFULLY READ AND FOLLOW THE OPERATING MANUAL!
This device is intended for domestic or similar, non-commercial use. The manufacturer will not be held liable for damages resulting from improper or non-compliant use

TECHNICAL DATA

DEVICE DESCRIPTION

OPERATION

Replacing the batteries

1. Open the battery compartment on the back of the remote.
2. Insert two 1.5V AAA batteries. Make sure that they are installed according to the + and – markings in the interior of the remote.
3. Close the battery cover.

Pairing
To pair the remote with a bulb:

1. Connect the bulb to the the Wi-Fi network according to their instruction manual.
2. While in the vicinity of the light bulb, hold down one of the four group buttons on the remote.
3. The bulb will blink 3 times to confirm pairing with the remote control.

To unpair:

1. Make sure that the paired bulb is switched on.
2. Simultaneously hold down the brightness button – and the group button to which the bulb is connected, for approx. 3 seconds.
3. The indicator on the remote control blinks several times, confirming unpairing.

One group can consist of up to 20 paired bulbs.

You can add or remove additional bulbs to a group with a paired  bulb.
When pairing, please note that any turned on bulb in the area will be connected.

Bulb control
Changes to the brightness, color temperature or color of the bulbs can be made for individual groups or for all connected bulbs. To control the bulbs in a given group, turn it off and on using one of the group buttons. To control all bulbs, turn the bulbs off and on with the general On/Off button.

Operation of buttons

BUTTON	ACTION	OPERATION
	Press	Enable or disable all groups
	Press	Turn on the night light – the bulbs in the selected group will switch to warmer and darker setting
	Press	Switch between any of the 7 colors available (only available for RGB bulbs)
	Press	Increase brightness by 20%
	Press	Decrease brightness by 20%
	Press	Increase the colour temperature by 20%
	Press	Decrease colour temperature by 20%
	Press	Select and enable/ disable Group 1
	Hold	Pair the switched bulbs with group 1
	Press	Select and enable/ disable Group 2
	Hold	Pair the switched bulbs with group 2
	Press	Select and enable/ disable Group 3
	Hold	Pair the switched bulbs with group 3
	Press	Select and enable/ disable Group 4
	Hold	Pair the switched bulbs with group 4
	Press	Switch between scenes assigned to the bulb
	Hold	Disconnect assigned pair

CLEANING & MAINTENANCE

Clean the device regularly by wiping it with a lightly dampened cloth of soft material.

When the device is not in use, remove the batteries. Store the device in a dry, safe place, away from children.

CAUTION! DO NOT USE CHEMICALS OR ABRASIVES FOR CLEANING

TROUBLESHOOTING

DECLARATION

ART-DOM Sp. z o.o. hereby declares that the SR200 remote complies with the relevant requirements of the Union harmonisation legislation:
Directive 2014/53/EU and other Union harmonisation legislation.
The full text of the EU declaration of conformity is available at the following address: www.artdom.
net.pl/deklaracja/SR200/

ECOFRIENDLY AND ENVIRONMENTALLY

This device is marked, in accordance with Directive 2012/19/EU of the European Parliament and of the Council of 4 July 2012 on waste electrical and electronic equipment (WEEE) with the symbol of a crossed-out waste container:
Do not dispose of the device marked with this symbol together with household waste.14 For disposal return the device to your local waste treatment and disposal facility or contact your local authorities.

YOU CAN HELP PROTECT THE ENVIRONMENT!

Proper handling of waste electrical and electronic equipment contributes to avoiding harmful consequences for human health and the environment resulting from the presence of hazardous components and improper storage and processing of such equipment.

WARRANTY CONDITIONS FOR SMART REMOTE

1. ART-DOM Sp. z o.o. with its registered o ice in Łódz (92-402) at ul. Zakładowa 90/92 National Court Register Number 0000354059 (Guarantor) guarantees that the purchased device is free from physical defects. The warranty covers only defects resulting from the causes inherent in the item sold (manufacturing defects).
2. A disclosed defect will be removed at the Guarantor’s expense within 14 days from the date of reporting the damage to the authorized service or point of sale.
3. In exceptional cases, e.g. the need to import spare parts from their manufacturer, the repair period may be extended up to 30 days
4. The warranty period for the user is 24 months from the date of delivery of the goods.
5. The goods are intended for use only in the conditions of an individual household.
6. The present warranty does not cover:
   a. damage caused by using the device in a manner inconsistent with the user manual,
   b. mechanical, chemical or thermal damage,
   c. repairs and modifications made by companies or persons that were not authorized to do so by the manufacturer,
   d. parts that are easy to use or consumables such as: batteries, bulbs, fuses, filters, knobs, shelves, accessories,
   e. installation, maintenance, inspection, cleaning, unlocking, removal of contaminants and instruction
7. The Guarantor will select the mode of defect removal at its own discretion. Removal of a confirmed defect of the device will take place through warranty repair or replacement of the device.
   The Guarantor may perform repairs when the buyer requests replacement or the Guarantor may perform replacements when the buyer requests repair, if bringing the goods (device) into conformity in accordance with the granted warranty in the manner selected by the buyer is impossible or would require excessive costs at the part of Guarantor. In particularly justified cases, if both repair and replacement are impossible or would require excessive costs for the Guarantor, the Guarantor may refuse to bring the goods into compliance with the granted warranty and propose another way to settle the warranty claim.
8. The exchange of goods is made at the point of sale at which the goods were purchased (replacement or refund) or an authorized service point, if it ores such service (replacement). The returned device must be complete, without mechanical damage. Failure to comply with these conditions may result in failure to accept the warranty claim.
9. In the event of non-compliance of the goods with the sales contract, the buyer is entitled by law to legal protection measures on the part and at the expense of the seller, and the warranty does not a ect these legal protection measures
10. The warranty is valid in Poland.
11. The condition for the warrant y repair or replacement of the device is the presentation of proof of purchase and the use of the goods in accordance with the information contained in the user manual.

CAUTION!
Damage or removal of the rating plate from the device may result in warranty being deemed void.

We are constantly improving our products, so they may differ slightly from the images presented on the packaging and in the user manual. Please read the user manual before operating the appliance.
ART-DOM Sp. z o.o., ul. Zakładowa 90/92, 92-402 Łódź, info@artdom.net.pl. National Court Register number 0000354059.