SERVER 07745 Express Pumps Instruction Manual

SERVER-07745-Express-Pumps-logo

SERVER 07745 Express Pumps

SERVER-07745-Express-Pumps-prod

ASSEMBLY

INSERT PINCH VALVE into pump housing.

SERVER-07745-Express-Pumps-fig-1

INSTALL DOME
Slide loop of dome up the housing tube. Press dome into housing fully. Ensure valve flap covers bottom opening.

SERVER-07745-Express-Pumps-fig-2

INSERT DISCHARGE FITTING 

into pump housing discharge tube. Place loop of fitting around peg on end of discharge tube to secure.

SERVER-07745-Express-Pumps-fig-3

DISASSEMBLY

According to food and safety regulations, most foods must be stored and/or served at certain temperatures or they could become hazardous. Check with local food and safety regulators for specific guidelines. Server Products, Inc. cannot be responsible for the serving of a potentially hazardous product.

SERVER-07745-Express-Pumps-fig-4

CLEANING

  • FLUSH & RINSE
    all pump surfaces with hot water. Place lower end of pump into a container of hot water and operate pump until all remaining product is expelled and only hot water is discharged.
  • DISASSEMBLE & CLEAN
    all washable parts with soap and hot water. Use brush to clean any confined areas.
  • RINSE
    fully with clear water
  • SANITIZE
    all parts according to local sanitization requirements. All parts in contact with food must be sanitized.
  • AIR DRY
    all parts fully

MODEL 07745 

  • PART QTY DESCRIPTION
  • 07798 1 LARGE PINCH VALVE
  • 07399 1 PUMP DOME, BLUE
  • 07744 1 PUMP HOUSING ASSEMBLY
  • 07797 1 DISCHARGE FITTING, .394, LG

SERVER-07745-Express-Pumps-fig-5

TROUBLESHOOTING

DIFFICULT TO ATTACH PARTS?
Wet parts with clean water to help fit

PRODUCT DOESN’T PUMP?

  •  Ensure pinch valve is inserted in housing.
  •  Ensure connector is snapped fully in place to fitment in pouch.
  •  Ensure pump is properly installed in unit.
  •  Clean pump thoroughly.

SERVER-07745-Express-Pumps-fig-6

LIMITED WARRANTY

This Server product is backed by a two-year limited warranty against defects in materials and workmanship. See Server-Products.com for details

GENERAL SERVICE, REPAIR OR RETURNS

Before sending an item to Server Products, contact Customer Care to request a Return Authorization Number. The RA Number ensures proper processing and a prompt turnaround. Repaired units are typically shipped out within 48 hours of receipt. Merchandise returned for credit will incur a 20% restocking charge, must be less than 90 days old, and in unused (new) condition. Electrical parts (thermostats, heating elements, etc.) are not returnable. Servicing Cord: Specific tools are required for safe and proper power supply cord removal and installation. Repairs should be done by an OEM representative or qualified technician using a cord meeting code H05 RN-F requirements

Documents / Resources

PDF thumbnail07745 Express Pumps
Instruction Manual · 07745, 07745 Express Pumps, Express Pumps, 07745 Pumps, Pumps
PDF thumbnail07745 Express Pumps
Instruction Manual · 07745 Express Pumps, 07745, Express Pumps, Pumps

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.